Eastwood OptiFlow 2-Pack Small Rollers for Roll-On Primer

Item #23127

Eastwood OptiFlow 2-Pack Small Rollers for Roll-On Primer
OptiFlow Small Replacement Rollers for the smoothest finish possible from a roller.
$6.99
- +
Quantity:
Quantity: close

Out of Stock

Due Back In Stock: 07/10/2021

OR

Details

  • Optiflow Rollers use Micro-Nap Technology to provide the smoothest automotive finish possible from a roller.

  • Achieve a Professional quality finish at home in your garage with no spray equipment needed.

  • These rollers are designed to be used with the 4" Roller Frame of the OptiFlow Roll-On Paint System.

  • Designed for great coverage on the tight spots and contours like windshield pillars and body lines.

  • Your friends will think it was sprayed.

  • If you want to learn more about the advantages of OptiFlow and see all the products and kits available, click here for the OptiFlow Roll-On Paint System

Contents

(2) - 6" Small Replacement Rollers that fit the 4" Roller Frames in the Optiflow Roll-On Paint System


Frequently Asked Questions

What type of roller do I need? Can I buy one at the hardware store?

While the OptiFlow epoxy and urethane can be applied with any type of paint roller, the results will be far less than satisfactory and you will have poor coverage, as well as pinholes and trapped air because standard rollers are not designed for this type of coating. To get optimal results, even coverage and to limit sanding, you will need to use the rollers designed for the OptiFlow Primers. The larger 7” roller is ideal for large, flat panels such as doors, hoods and roofs. Use the smaller 6” Roller for roof edges, windshield pillars, body line contours and tight spaces where a large roller can’t fit.

Why do I need to use this primer rather than standard primers?

Both the OptiFlow epoxy and urethane surface were formulated to provide maximum corrosion protection, adhesion and topcoat durability. A proprietary under-indexing of the Acrylic Polyol’s provides the coatings with superior flowout in the roll-on application.

What is the difference between this and your regular primer?

The OptiFlow Epoxy and Urethane will have the same mechanical properties, corrosion protection and durability as any high quality brand professional coating. The difference is that OptiFlow is formulated for people that do not have paint gun equipment, the skills to spray, or proper area to spray apply finishes. Plus there is no overspray or paint gun to clean up, as well as the convenience of rolling.

I’ve seen people roll on "hardware-store paints" and it looked pretty good. Why do I need this primer?

"Hardware Store Primers" are single component coatings, even the most well known brands. While you can use these products, they will not last or look good for long. OptiFlow is a high performance 2 -component, catalyzed coating that is designed for automotive steel substrates that provides an exceptional corrosion barrier to the substate and promotes superior adhesion for top coats.

Can I apply in my driveway? My garage?

OptiFlow coatings are designed just for that! Inside or out because you don't have to worry about getting overspray on the neighbor's cars or everything in your garage!

How long does it take to roll on a typical coat on an entire average size car?

It only takes between 12 and 20 minutes to apply a coat on an average size car, and this includes spraying 2K AeroSpray Primer in the hard-to-reach areas.

How many coats of each primer do I need to apply?

Typically you will apply 2-4 coats of Epoxy Primer and 3 coats of Urethane Primer.


Safety

Always wear eye, respirator and skin protection. Use in a well ventilated area and consult the product MSDS sheet for specific warnings and precautions.


Warranty

One Year Warranty


Eastwood Offers Free Lifetime Technical Support


Click here for product SDS information


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


   

Customer Reviews

Questions & Answers