Item # 23130zp-23131zp BRAND: Eastwood

Eastwood OptiFlow Epoxy Primer Gallon and Catalyst Kit - Automotive Roll-On Paint - Gray

The easiest way to get your car in primer and ready for paint. No Paint Gun Needed!
The easiest way to get your car in primer and ready for paint. No Paint Gun Needed!
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 21.32ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$197.98
Loading...
Save for Later
The easiest way to get your car in primer and ready for paint. No Paint Gun Needed!
  • 90-Day Returns
  • Technical Support
  • 1 year Warranty
Eastwood OptiFlow Epoxy Primer Gallon and Catalyst Kit - Automotive Roll-On Paint - Gray

Product Overview:

Description

OptiFlow Roll-On Epoxy Primer 1:1 is the easiest and most efficient way to get your car in primer, whether you're tackling the entire project or just doing one panel at a time! With excellent adhesion and corrosion resistance over bare steel as well as aluminum, fiberglass, body fillers and even existing finishes, it's the basis for a perfectly straight car with NO PAINT GUN NEEDED! Easily get your project in primer and ready for body work and basecoat, saving you time and money. It goes on so smooth everyone will think the great results came from an expensive HVLP spray gun.


To properly apply this product and get the best results, you will need the OptiFlow Tray and Roller Kit.


OptiFlow Advantages

  • Save THOUSANDS when you do it yourself, and that's money you can spend on an engine, wheels or more tools!

  • No overspray (in your garage or on the neighbor's car)

  • Minimal masking required

  • No airline contamination

  • Confidence to primer your project! Plus pride in knowing you did it yourself.

  • Fast and easy cleanup


OptiFlow Epoxy Details

  • Easy 1:1 mix ratio with separate catalyst (item 23131) to make two roll-able gallons. Enough to cover most cars.

  • Sands easily 2-3 days after application.

  • DTM - Direct To Metal application for a strong bond. Even apply over existing coatings, fiberglass and fillers.

  • 50 State Compliant, Low VOC Formula. Contains no lead, chromate or isocyanates.

  • Awesome results without overspray or professional spray equipment. Plus no gun to clean. Save Time & Money.

  • Nobody will know it was rolled on unless you tell them!

  • To properly apply this product and get the best results, you will need the OptiFlow Tray and Roller Kit.


Incredible Results with OptiFlow

Eastwood OptiFlow Roll On Paint



Video


In the Box

Guides & Accessories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 21.86ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

Would you consider offering this roll on primer in different colors besides gray, such as black or red oxide?

Asked by: Alan
Your request has been noted and forwarded to our research department.
Answered by: vince
Date published: 2021-08-17

What is the temperature range for storage of the optiflow epoxy primer

Asked by: bbtenor1
This should be stored in a temperature controlled environment and not subjected to temperatures below about 45-50F.
Answered by: Kelly H
Date published: 2021-02-06

EASTWOOD OPTIFLOW EPOXY PRIMER, do this uses same CATALYST as rest of Eastwood epoxy n paints or there is a difference ? thx

Asked by: Fiji
Hi there, The Optiflow paint and activator are going to be different than the normal epoxy primers that are designed to be shot out of a gun.
Answered by: ZachC
Date published: 2021-02-02

Does Optiflow epoxy uses same ACTIVATOR as rest of the Eastwood epoxy primer?

Asked by: Fiji
NO. The Eastwood Optiflow Primer System(23130ZP) uses a proprietary Activator formulated to be use with The Optiflow System only.
Answered by: vince
Date published: 2021-02-01

After sanding a corvette down to the gelcoat with some fixed fiberglass spots and body filler, can i roll on optiflow epoxy over fiberglass? will that work as a gelcoat for fiberglass and is it compatible with fiberglass and SMC?

Asked by: Paul
Yes you can roll The Optiflow Epoxy Primer(23130ZP) over fiberglass and SMC. Epoxy Primer is not a replacement for the Gel Coat Finish on fiberglass as Gel Coat is a Top Coat finish. Optiflow Epoxy primer will seal fiberglass and provide a superior water proof base for Your Top Coat of choice.
Answered by: vince
Date published: 2020-12-18

What is the shelf time for EASTWOOD OPTIFLOW EPOXY PRIMER also if the gallon once open, can it be reusable if there is a left over, if yes then, days , months or years?, thx

Asked by: Fiji
Eastwood warrantees the OPTIFLOW EPOXY PRIMER & ACTIVATOR (23130ZP - 23131Zp) for one year from the time of purchase. The Standard shelf life for most unactivated epoxy paints is 2 years. once opened it can be used again as long as it hasn't been activated. Once activated the pot life is approximately 20 to 30 minutes.
Answered by: vince
Date published: 2020-12-05

Instructions say (p.7 last bullet) before applying this epoxy primer, wipe surface with Eastwood Pre *or acetone*. I've read conflicting views on using acetone under epoxy due to it being petroleum based. Is it ok to use under the epoxy? (dtm application)

Asked by: Zane
Our PRE painting prep or Acetone both work fine with our formula in reference here.
Answered by: Kelly H
Date published: 2020-12-04

Can this primer be applied directly over the black e-cost that comes on new sheetmetal parts? If so, what prep is needed?

Asked by: Ghost
Yes, sand or scuff with a ScotchBrite pad before applying the Epoxy Primer.
Answered by: RLRL
Date published: 2020-09-11

Can you apply the optiflow primer over a zinc phosphate coating, like what you have after using fast etch to clean out rust pits? Or should you use rust encapsulator or POR15 in the pits first?

Asked by: dac7
OptiFlow Epoxy primer can be applied over Fast Etch, once it is properly neutralized (usually cleaning with Pre Paint Prep). If you're not able to remove rust from the pits, you can apply Rust Encapsulator and then sand so the Encapsulator remains in the rusty pits, but is removed from the clean areas of the metal. Then apply Epoxy. Completely removing rust from the pits is the best option.
Answered by: RLRL
Date published: 2020-09-11

Can this primer be tinted? I'm not planning on painting the car anytime soon, so I would like to have red primer on the car instead of the gray that's on there now. ( A nice red, not red oxide).

Asked by: snub
We do not recommend tinting the OptiFlow Epoxy as it may take up to 1 qt to actually change color to what you need , such as red from gray. The chemistry of your tint color may affect the overall performance of our coating, so that is why we do not recommend it.
Answered by: NickC
Date published: 2020-08-13

can this be brushed on as well?

Asked by: kerpudge
To ensure the correct final finish we only recommend rolling this product on.
Answered by: Scott C
Date published: 2020-07-23
  • y_2022, m_1, d_25, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_23130zp-23131zp, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 54.07ms
  • QUESTIONS, PRODUCT
Eastwood OptiFlow Epoxy Primer Gallon and Catalyst Kit - Automotive Roll-On Paint - Gray
$197.98
In Stock