Easily cut straight lines, curves, radii and circles
The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email [email protected].
Always wear approved eye protection and gloves. Do not use around flammable materials. Refer to your Eastwood Plasma Cutter Instruction Manual for additional safety information.Do not touch Plasma Cutting Guide with bare hands while in use!Plasma Cutting Guide may become hot with use, handle carefully with gloves.
Rated 5 out of
5 by
Jesse87 from
Just what I needBought this for my Hobart 250 ci plasma cutter. This will work for it if you modify the plastic tip where the guide goes on the plasma cutter. There is a smaller diameter part of the plastic tip then a wider part. All you need to do is use a dremel with a sander. Sand all the way around the wider part of the plastic until the guide will fit. It works great for my first trial and cut a circle. Now I can't cut straight and do circles, makes things easier. Expensive for a simple design. But worth it by not trying to make something that might not work.
Date published: 2016-05-22
Rated 5 out of
5 by
JeffP from
I should Have Invented This Years Ago!After upgrading my antique plasma cutter with an Eastwood model, I saw the video and decided the guide was worth a shot. This is the best accessory ever! Watch the video! A beginner really could follow a line drawn with a marker and get a perfect cut every time! Best of all it maintains the perfect distance from the work-piece for optimum cuts and prolonged tip life. I love it!
Date published: 2016-02-05
Rated 5 out of
5 by
billy ray from
workswelli have made a few purchases from Eastwood as of late and have been pleased with price, quality and support.i also like your tips and learning site. i will most likley be customer for a long time. thanks again
Date published: 2016-01-23
Rated 5 out of
5 by
Ksmith from
Great!I bought a Plasma cutting guide for my boyfriend. He loves it! fast shipping. Everything was perfect. Would shop for again!
Date published: 2016-01-07
Rated 5 out of
5 by
jessclark from
Exactly what I neededI did the research prior to purchasing this plasma cutter. It offered the same features as the more expensive brands. I could not be happier with the purchase. It is easy to use, and gets the job done.
Date published: 2015-07-03
Rated 5 out of
5 by
DBnRT from
Guiding a beginerLearning with Versa Cut 40 amp. Practiced on my VW floor pan free hand the first time and had trouble keeping the correct height of the nozzle from the metal and cut was wavy.
Got the Guide to cut straight lines mostly. Works excellent, I lock the guide so the wheels are inline with the cut and best position for hand hold. Guide sets the nozzle at the correct height, so no guessing or risk of damaging the tip.
Cut a perfect laser straight line first time, well worth the investment.
I'll try the circular bar after I get more practice.
Date published: 2014-12-01
Rated 5 out of
5 by
Radiant UV from
a must havegreat tool, took a specific talent and made the work easy to learn for the other guys
Date published: 2014-11-21
Rated 5 out of
5 by
Johnny from
Helps cut straight lines actually straight!Local steel supply houses want so much money for some of the simplest things lately... I decided to accessorize my Eastwood [40] Plasma Cutter... and Boy am I pleased! I set up a guide where I want it and slice away- 12 gage on down... heck I even was able to successfully cut 1/4" plate exactly how I wanted- I can see buying a couple of these and creating some template type tools... I believe I got what I paid for.
I haven't used it for circles, just a lot of straight & follow the guide type cutting.
Date published: 2014-10-31
Rated 5 out of
5 by
FireForge from
Works well with my Hobart WelderI bought this knowing that it was not designed for my Hobart Plasma cutter...but for the price I figured I couldn't go to far wrong. The cutter does not fit in the designed direction...but if you flip it over...the cutting head fits right in and holds the cutting tip at the right height. I can cut either direction just by holding the tip in the cutter with one hand and holding the guild in the pre-drilled hole with the other. Takes a little practice...but I can now cut perfect circles and arches with just a little clean-up grinding. Glad I found this tool...thanks Eastwood...FireForge Art Glass
Date published: 2013-03-22
Rated 5 out of
5 by
Kenny from
ExcellentLet me start off I knew it wouldn't work Keep reading
Simple but well-made Excellent value I knew I would have to send it to my machinist To work on my spectrum 625 extreme Going to buy one more for other machines Most my work is one-off prototype The only thing that I would have to say negative Need to think outside the box on designing To make it more versatile for other Machine Not everybody has the luxury of a machinist In their shop
Thank you.
Kenny
Date published: 2013-01-16
Rated 5 out of
5 by
Anonymous from
Product works wellSurprised by the earlier reviews - The arc started with no problem using my Eastwood plasma cutter running on 120V. The instructions are explicit about positioning the plasma head in the tool. There are two positions possible - one will place the plasma head close to the surface, the other way it most likely would be too far away to strike an arc. Although I didn't have a problem cutting a circle with the current guide, Russell's comment about a magnetic/screw center holder is a good one. To keep the center point from walking around I just drilled a small hole to keep the point centered. I'm going to cobble a magnetic center point together and give that a try.
Date published: 2013-01-01
Rated 4 out of
5 by
Rick from
Worksit does what its suppose to. Not more more I can say.
Date published: 2022-09-26
Rated 4 out of
5 by
Dan H from
Works great but a bit wobbly.Works great for cutting straight lines, have not used it as a circle burner yet. The wheels are a bit wobbly, and sometimes bind and slide instead of rolling but its impossible to rule out operator error when that happens.
Date published: 2022-05-19
Rated 4 out of
5 by
Thomas from
Eastwood Plasma Cutting GuideGuide works fairly well I have had Trouble keeping the adjustment rod from moving when cutting, the thumb screw should have a soft tip on it so it can be tightened with out damaging the adjustment rod.
I am using this guide on my versa cut 40 unit.
Date published: 2021-12-30
Rated 4 out of
5 by
Richard Willoughby from
Your shipping costs are way to high for such a smart item!Shipping cost way to high, not in line with most other shippers.
Date published: 2021-12-15
Rated 4 out of
5 by
Ernest from
Great itemHave not used it yet, but it looks like a great idea, will use soon
Date published: 2019-02-18
Rated 4 out of
5 by
firemech from
works greatI used this on a hyper therm 900, that had a nozzle diameter of 1.00", I removed center collar and machined out on lathe to fit.
Date published: 2018-03-14
Rated 4 out of
5 by
Big D from
Plasma cutting guideIt works real good only thing I wish is it came with a few shorter rods when working in tight places the back would stick out and hit other things
Date published: 2018-01-12
Rated 4 out of
5 by
Steve68 from
Good quality and works fineI read the other reviews and don't understand how someone could call it poor quality.
It is well made and works fine. I set up a jig that I can put on a pre-marked line and it makes cutting quick and easy.
Date published: 2017-12-27
Rated 4 out of
5 by
Sky 1 from
Works greatThe Plasma 40 and I were not getting along until I got the guide. Now I'm making excellent arcs and other cuts.
Date published: 2016-09-08
Rated 4 out of
5 by
ABCoors from
great toolthis makes even an amateur look good. I did have to work with the spring and eventually go rid of it and used spacers. I couldn't get the spring to work and clamp down on the rod
Date published: 2016-08-31
Rated 4 out of
5 by
Joeyc from
Nice clean linesi used this to finish up a small chain saw holder for my ATV, i clamped a straight piece of metal down and rolled this right along side of it for a perfect cut. the circle cutter works great, just a quick center punch and rolled it right around. Only complaint is it needs two different size allen wrenches and neither one is included
Date published: 2016-01-17
Rated 4 out of
5 by
Angel070571 from
Great item, works great!Great addition to my Versa Cut 40, work as advertised, makes easy to cut circles or half moons. U can use the cutting roller alone also for straight cuts. Great value for the price. Also, Eastwood gives a better price than anyone on line, even eBay. Shipping was fast.
Date published: 2015-12-27
Rated 4 out of
5 by
Num1McGyver from
Glad I ordered it when I got the Versa 60I've had this for several weeks, used it a few times and darn glad I had it. I needed a 6 inch circle in some sheet metal, made a tiny hole with the plasma cutter, put the screw for the guide in the hole, perfect 6 inch hole in about 30 seconds after that. Easy and reliable way to make perfect holes. The guide without the circle attachment is sweet too. Just roll along on the two wheels and get easy straight cuts or anything else!
Date published: 2015-04-28
Rated 4 out of
5 by
Thumper from
Worth every cent.Don't know why it took me so long to add to my shop. Makes it so easy to do the job right the first time.
Date published: 2014-11-01
Rated 2 out of
5 by
Jimmy from
Would not work when removed from box.On opening the Plasma cutting Guide the silver wheels would not turn, the shoulder screw appeared to be out of round or have high spots on the shoulder. After disassembling the wheels polishing the shoulder and the bore on the wheels it now works. This appears to be poor quality control to me. And what is a tool when you need a 2mm and a 2.5 mm allen wrench to use the tool, and you have to find one or buy one to use the tool, would it cost a fortune to supply one with the tool when purchased? Since the tool was most likely made in China the cost of two small allen wrenches should be minimal.
Date published: 2020-01-02
Rated 1 out of
5 by
Nicholas from
good in theory but bad in practice...I thought this would be "plug and play". I do not reach for this when I am cutting and drag tip has done more for me than this. I feel like with about an hour at a hardware store I could make some competitive with this for around the same price. The first time using this... I drew out the shape that I wanted to cut out and found out that lining up the cut looking from the top is next to impossible. Next drawing the lines about an inch off from the real cut is really hard for my small brain. kewl it cuts circles? dropping down a washer and tracing around is still my go to method. kewl it cuts lines? straight edges works great too.
Date published: 2023-05-13
Rated 1 out of
5 by
El Smitto from
Plasma cutting GuideThis plasma cutting guide looks great, but the inside diameter is too small for my Hyperthermia 45 XP. I had to send it back.
Date published: 2021-08-04
Rated 1 out of
5 by
Hunter from
Disappointed!The guide wheels are loose and wobbly. Not worth $50!!!!!
We do not test the compatibility of our products with other brands. However, this is attached via a set screw so would be pretty universal.
Answered by: ZachC
Date published: 2023-03-22
WILL THIS FIT THE LOTOS CT520D RED PLASMA CUTTER
Asked by: Osvaldo
As stated in the about section: "This cutting guide was specifically designed to fit the Eastwood Versa Cut Plasma Cutter. This cutting guide will also work on other torches with a 0.95" Nozzle."
Answered by: Kelly H
Date published: 2023-03-22
Will this fit the miller 375 extreme plasma cutter
Asked by: John
The cutting guide is designed to fit on trafimet cb70 torches.
Answered by: SeanW
Date published: 2023-03-22
I have a versa cut 20 plasma cutter. The circle cutter guide leaves a gap to large to start an arc. What should I do. Grind the guide down to narrow the gap. Are the wheels adjustable, or different Dia to create smaller gap. Or ask for money back.
Asked by: Scout Mac
You could try turning the body of the tool upside down and see if that works. If you can not get it to work to your satisfaction, than please call our customer service line.
Answered by: Bob G
Date published: 2023-03-22
Do this work over glass
Asked by: Israel
This product is not designed to work over glass.
Answered by: SeanW
Date published: 2023-03-22
Does it work with the XT40 torch from the Miller Spectrum 625 X-TREME Plasma Cutter?
Asked by: Ziddy
While this guide is designed to fit out machines it will also work on other torches with a 0.95" Nozzle.
Answered by: Scott C
Date published: 2023-03-22
Will this fit an LTP 7000. And also do you take Paypal
Asked by: Slowjo
This unit Will also work on other torches with up to a 0.95 Inch Nozzle. At this time we do not accept PayPal but are looking into offering it in the future.
Answered by: Scott C
Date published: 2023-03-22
Will this fit my Hpyertherm Powermax 30?
Asked by: TheDogFather
While this guide is designed to fit out machines it will also work on other torches with a 0.95" Nozzle.
Answered by: Scott C
Date published: 2023-03-22
Will this fit the versa 40 ?
Asked by: Ray 100
Yes, this will fit both our Plasma 40 & our Plasma 60.
Answered by: Kelly H
Date published: 2023-03-22
this product has a max. diameter cut of 17'' but I need to cut up to 24'', is there an extension or longer compass rod available?
Asked by: brian d
It is easy to make your own if you have drilling capacity. Attach a sleeve with two set screws on one end and two on the other end, guessing two to three inch bushing. Insert same size rod half way and tighten set screws.
Answered by: Bobinwa
Date published: 2023-03-22
when cutting with plasma cutter: how high 0ff the work should the torch tip be ???
800-343-9353 | 
Chat | 
Email Us
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
