- Eastwood QST-30/60 Quiet Scroll Air Compressor
Eastwood QST-30/60 Quiet Scroll Air Compressor
Eastwood QST-30/60 Quiet Scroll Air Compressor
Item #31700 Scroll Compressor
WHAT IS QST?
Quiet Scroll Technology is the most innovative air compressing technology for optimum power, performance and noise reduction on the market today!
- Innovative - Direct Drive Cast Iron Scroll Pump
- Integrated Oil Cooler - Multi-stage oil filtration system
- Low Noise Level - Only 69db, 87% noise reduction over standard piston compressors
- Compact Size - Performance of a 60 gallon in the size of a 30 gallon
- Powerful - 12 cfm @ 40 psi, 12 cfm @ 90 psi, 145 psi max pressure, 100% Duty Cycle
- Dependability - 100,000 hour pump life, 3.3 HP continuous duty motor, All steel pressure hard lines and hydraulic style flex lines
The quietest compressor we've EVER tested PLUS it will run every air tool in your shop!
- Only 69 dB at 1 meter: 87% quieter than most piston compressors
- Comparable in noise to your home A/C unit
- Quieter than your air tools
- 3450 RPM Industrial Scroll Pump produces 12cfm - enough air for small production shop
- Comparable in performance to units costing 3x as much
- Innovatine technology maximizes air delivery to your tools
- Direct Drive motor and pump eliminates belt noise, slippage and dust
- CNC machined high strength scroll pump for extended life and max effciency
- Pressurized oil lubrication system assures 100,000 hour pump life
The 3450 RPM industrial grade scroll pump produces 12 cfm and will be able to handle most air tools and paint guns in your garage or shop.
Completely portable so you can take it to the project you are working on. Moves easily on the 4” ball bearing casters with 3-1/2” high-density urethane wheels. Two of the wheels feature swivels and locking brakes.
A scroll compressor has only one moving part -the rotating scroll.The rotating scroll is moved in an eccentric motion by the electric motor output shaft inside of a corresponding stationary scroll. The eccentric movement pulls air in from the outer edges and efficiently compresses the air charge toward the center of the scroll. This constant displacement pump design reaches 100% volumetric efficiency and ultra-quiet operation with minimal components.
A piston compressor utilizes many components to drive a piston in a reciprocating motion, up and down, in the cylinder. As the piston moves down in the cylinder, a valve is displaced and allows air to enter, the piston then changes direction and compresses the air charge and expels the majority, but not all, of the charge out the exhaust valve. In theory, the piston compressor can never reach 100 % volumetric efficiency as there will always be a small amount of air left in the cylinder as the piston can never touch the top of the cylinder to due mechanical interference.
The constant change in piston direction, rotating crankshaft, metal on metal of the piston rings and cylinder wall and intake valve fluctuations all contribute to the annoying loud compressor noise we are too familiar with.
Why is a scroll better than a piston?
A scroll compressor is truly 100% volumetrically efficient, meaning all the air that is pulled into the intake side is compressed and moved through the exhaust side into the tank. The scroll has only one moving part eliminating the constant wear and blow-by associated with piston compressors. The scroll rotates in one direction and is designed to run at 100% duty cycle very efficiently and the reason it only requires a 3HP motor to drive the scroll to 12 cfm, and the best part…. The lack of noise!
(1) Eastwood QST-30/60 Scroll Air Compressor
Power Requirement: 220-240V, 60Hz, 20-Amp, Single Phase
Motor Horsepower: 3.3 hp
Tank Size: 26.4 gallon [100 liter]
Tank Fill Time: 3 minutes max.
Air Delivery: 12 CFM @ 90 PSI
Cut-in Pressure: 115 PSI [7.9 bar]
Cut-out Pressure: 145 PSI [10 bar]
Max. Pressure: 145 PSI [10 bar]
Pressure Relief Valve Setting: 160 PSI [11 bar]
Motor and Scroll Pump RPM: 3450
Scroll Pump Oil Capacity: 44 ounces [1.3 liter]
Sound Reading @ 3.2 ft. [1m]: 69 DB
Power Cord: 6ft, 3-conductor grounded, 12 AWG
Always read and fully understand operators manual before using this product. Always consult a certified electrician to install the unit. Always keep hands out of the way of rotating components. Never operate this tool in wet conditions due to electrical shock hazard. Never weld to the tank of a compressor.
Click here to see safety products
Shipping: There is a $250 flat rate shipping fee for shipping in the Contiguous United States.
Lift Gate: A lift gate will be offered free of charge. If you have no way to unload the compressor (dock or forklift) you will need the lift gate option selected on your order.
How big is it?
The scroll compressor is 44" wide X 39" tall X 21" deep. It weighs 325 Pounds.
Will the scroll compressor need to be hardwired or will it have a plug?
The scroll compressor will come with a 12 ga cord that will not have a plug end. This will give you the option to hardwire or install an appropriate plug of your choice.
Will a 15 amp breaker be sufficient for power usage?
We require a minimum 20 amp 240 volt circuit to ensure that you will have no issues with the compressors 20 amp peak current draw.
Do these type of compressors shut off when the tank is full?
The QST will shut off at 145 psi which is when the tank full.
How Long does it take for the tank to fill to 145psi?
Approximately 3 minutes.
How Much does it cost to ship the Scroll Compressor?
Shipping is a 250 Dollar Flat rate Fee. In store pick up will also be available at our three retail locations.
Does the Scroll Compressor still need an air Filter/Drier?
Just like a piston compressor the scroll compressor compresses air which causes the air temperature to rise and moisture to condense Therefore the same Filtration and moisture separation will be needed to ensure clean dry air.
What is the Warranty?
The Scroll Compressor is backed by a 2 year warranty.
What are the maintenance requirements?
After the first year we specify an oil change and every three years we specify an oil and filter change. There is an air filter, an oil filter and a moisture separator/filter that would be changed at that time.
Where is this Compressor Made?
The air compressor is made in China to Eastwood's specifications. We do all validation and testing of products here in the USA to ensure that they meet our exacting standards.
High-End Custom Fabricator Testimonial
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers