Eastwood's premium Matte Clear Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.
- 1-quart Matte Clear Automotive Paint
- 8-fl.-oz. Activator required
- Catalyzed urethane for unsurpassed durability
- Highly resistant to UV rays, chemicals, chips
Some project rods just won't look finished until you've put on that distinctive, matte car paint finish. Our paint is the only way to go! This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.
About Eastwood Matte Clear Quart Kit
Sure, some like to "drive her in primer", or opt for a quick "rattle-can" paint job, but this activated, single-step acrylic urethane car paint is a smarter and much longer-lasting choice! Mix 3:1 with activator; no further reduction required.
Use this kit with Eastwood's premium single-stage urethane paints or other manufacturer's base-coat systems. May even be used over factory finishes in good condition. Matte Clear is also ideal for interior parts, underhood components, hobbies and crafts.
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.Two medium coats will achieve a 10-15% gloss level.
Other finish options include applying over Eastwood's 21855ZP Satin Black to produce a 0% gloss. May also be mixed with EW European Urethane Clears to achieve a variety of gloss levels.
12458ZPA is the Rat Rod Matte Clear Topcoat, 1-qt. can
21854ZP is the Eastwood Urethane Activator, 8 oz.
10194ZP PRE Painting Prep, Quart
51605 Concours HVLP Paint Gun Kit
51686 Concours HVLP Detail Gun
20474 4-Stage Dry Air System
50040ZP Master Paint Prep Kit
51561Z 6" Liquid Ice Buffing Kit
34053 Hobby Air Fresh-Air System
51559 Digital Regulator
50244ZP Epoxy Gray Primer, Gallon
50245ZP Epoxy Primer Catalyst, Gallon
50240ZP 2K Urethane Gray Primer, Gallon
50241ZP 2K Urethane Primer Catalyst, Quart
Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 28-32 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.
(Q) How much paint do I need?
(A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.
Product Instruction Sheet
Paint Chip Chart
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
You may also be interested in the following product(s)
Starting at: $27.99