Rust Converter Kit stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding
- Just brush-on or spray to transform the rust
- Penetrates faster than other brands
- No mixing needed
- Kit includes 1 aerosol can and 1-quart can
Eastwood's own high-tech formula converts rust into a protective polymeric coating that's ready to go as a primer, and is compatible with most top coats. That new protective coating will also seal the surface against moisture to prevent future rust growth.
Eastwood's renowned Rust Converter is available in a both quarts and convenient aerosol packaging. This high tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating, eliminating the need for sanding The converted protective coating is now a suitable primer and is compatible with most top coats. To apply, simply remove loose rust with a wire brush and apply Eastwood's Rust Converter, allow it to dry and top coat it with a quality coating, such as Eastwood's Chassis Black.
(1) 51483Z Eastwood Rust Converter Aerosol
(1) 51676 Quart Rust Converter
Eastwood Rust Converter must be applied over heavy rust. Applies easily: simply remove loose rust with a wire brush, then brush- or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black.
For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally brush-on or spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black.
Always wear eye, skin and respiratory protection.
Click here to see safety products
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov