Item #
54292Z
BRAND: Eastwood
Eastwood Rust Encapsulator Plus Paint Pint
Twice the Corrosion resistance as the Original Rust Encapsulator Formula.
Twice the Corrosion resistance as the Original Rust Encapsulator Formula.
ATK New Chevy 350 CI Engine 315HP Mid Dress HP92M is rated
out of
5 by
294.
Twice the Corrosion resistance as the Original Rust Encapsulator Formula.
1 year Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Product Overview:
Description
Superior coverage over Original Rust Encapsulator! Great coverage in a single coat Saves You Money!
Eastwood has been one of the leading names in rust prevention for many years. Now we bring you twice the corrosion resistance of our original Rust Encapsulator in a simple to apply moisture cure coating. Spray it, brush it or roll it on. It does not matter, just get it on there to protect your next project from corrosion.
Rust Encapsulator Plus Features:
- 2X Stronger Than Original Rust Encapsulator
- 1000hrs of Corrosion Resistance
- UV stable in Non-Direct Sunlight Applications
- Should be top coated in Direct Sunlight Applications
- Direct to metal or apply over rust
- Heat Resistant Up To 350 Degrees F
- Only one coat required for full coverage - Saves Money
- Easy Application: Roll, Brush, or Spray
Warranty
Click here for the Eastwood Warranty Policy
Specifications
Heat Resistant Up To 350 Degrees F
Shipping & Handling
In the Box
Contents
Guides & Accessories
Instructions
Safety Information
Accessories
Application Tips
Best Used In Non-Direct Sunlight Applications
Reviews
Rated 5 out of
5
by
Bruce from
Great sealer
Great product easy to do and love the look and seal
Date published: 2024-04-02
Rated 5 out of
5
by
T om from
Date published: 2024-03-31
Rated 5 out of
5
by
Konnie from
1997 chevy silverado
The best stuff ever 👌 made my truck frame like brand new.. Definitely would recommend to anybody
Date published: 2024-03-15
Rated 5 out of
5
by
loki1313 from
Seems like good stuff!!
Bought a quart of this for my Jeep CJ frame that’s in pretty good shape just to give it some more protection. Did some cleaning and some sandpaper scuffing just cause it’s the best thing to do. I used a 2” chip brush to paint with and glad I did. This stuff dried pretty quick and is very thin. I think the thinness is a good thing as it helps the paint ooze into the rough surfaces and seal them up. I put it in a little thin and it still coated very well in my few spots that had the worst rust. Overall it left a decent finish and seems like it should do the job quite well.
Date published: 2024-03-14
Rated 5 out of
5
by
Dan E from
Excellent Product
A very high quality and effective paint. 100% satisfied.
Date published: 2024-03-11
Rated 5 out of
5
by
Anonymous from
Rust Prevention Paint
Shipping was reliable. The product went on easily and covered well. TBD how it works as I just painted it.
Date published: 2024-03-11
Rated 5 out of
5
by
HSteward from
Winner Winner
Product is easy to apply with a brush and coats well.
Date published: 2024-03-10
Rated 5 out of
5
by
Spencer from
Worth the money.
Works great. I used a total of 3 pints on my ford f250 . The punt was pretty thin and spread well. The quart was thicker so I cut it with 10 percent xylene. You don’t want it thick. It covers very well thinned out. I have an 8 foot bed that I was taking off to service the fuel pump and I wanted to cover everything while it was off. It covered drive line, frame, rear differential etc. I covered everything. Did not use all 3 pints.
Date published: 2024-03-04
Questions & Answers
Can this product be used #1 without a primer, #2 without a top coat, #3 on surfaces that are a combination of rusted and clean painted steel ? Thanks! John V.
No primer needed and it acts as a primer if you want to change the color to something else
Date published: 2024-03-10
Would 1 quart be able to do the whole frame on a crew cab, long bed f350?
2 quarts required for full size car or truck frame
Date published: 2024-03-09
How long does it last in the can after it’s been opened??
If fully sealed, and none of the product gets on the lip/ seal ring of the can when opened previously and it is stored in a temperature controlled environment- this will last about 1-2 years average.
Date published: 2024-02-10
Can rust encapsulator plus be applied directly to bare metal, regardless of rust or no rust?
Yes, the Plus Encapsulator can be applied to properly prepped bare metal surface; rust is not required. To prep- we advise to sand with 320 grit paper and clean with our PRE.
Date published: 2024-03-17
Is this rust encapsulator UV protected or do I need to top coat?
This Plus Encapsulator is not uv stable and will require a topcoat if being exposed.
Date published: 2024-02-09
Can this product be used on exhaust pipes and mufflers ? I have a 2010 SRT8 Jeep. I am wondering if it can be applied to my cat back exhaust. The exhaust system has a muffler, pipes and two resonators. The exhaust has about 60k on it.
We DO NOT recommend using Rust Encapsulator on exhaust systems.
We DO recommend using our Eastwood Silver Exhaust Paint, item #10020z
Aluminum-colored Exhaust Paint withstands up to 600 degrees Fahrenheit.
Perfect for protecting hangers, tailpipes and mufflers
Withstands up to 600 degrees Fahrenheit
10-oz. aerosol covers 6 sq ft.
Easy-to-apply aerosol formula covers exhaust components from the manifolds or headers back. Great for protecting hangers and tailpipes. An aluminum-colored coating that withstands high temperatures. Not recommended for catalytic converters, manifolds, headers or head pipes.
Date published: 2023-11-29
Is this product available in spray cans?
Unfortunately, it is not. At this time, we offer this and the Platinum in pints, quarts and gallon sizes only.
Date published: 2023-11-24
Gene, thank you for the response; do you have a product that may fill that crack? Thanks
https://www.eastwood.com/ew-contour-alum-repair-compound-25-3-oz.html
Date published: 2024-03-05
Eastwood Rust Encapsulator Plus Paint Pint
$25.99
In Stock