Eastwood's 2K AeroSpray™ Epoxy Primer Gray & Black

Item #14149 Epoxy Primer

Precision of a 2-component coating without the paint gun

Qty:
Quantity:
Quantity:
2K Aerospray Epoxy Primer Black

Item #14790Z

Only $22.99

In stock
Qty:
Quantity:
Quantity:
Eastwood 2K AeroSpray Aerosol Epoxy Primer Gray

Item #14149Z

Only $22.99

In stock

$0.00

Add to Wishlist

Details

Eastwood's 2K Epoxy Primer Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years.

2-Component Catalyzed Technology
Two Chamber Design Aerosol
Most Durable Aerosol Epoxy Primer Available
Sprays Like a Paint Gun

The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.

More info...

About Eastwood's 2K AeroSpray™ Epoxy Primer Gray & Black

Can be applied over: steel, aluminum, fiberglass, body fillers, existing finishes
Do not apply over: self-etching primer, Lacquer
Pot Life: Approximately 48 hours after button is pushed and can is activated.
Ideal application conditions:Temperature between 70-85 degrees F at 50% humidity or less.

12 Ounces net weight

Product Info Sheet

Click Here for product info sheets

Safety

Always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings

Warranty

Made in Germany using Eastwood's poprietory technology. 60 day warranty, 2 year shelf life. 48 hour pot life after activation.

Application

Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.