Item # 14149 Epoxy Primer BRAND: Eastwood

Eastwood's 2K AeroSpray Epoxy Primer Gray & Black

Performance and Durability of a Two Component Coating without the Paint Gun
Performance and Durability of a Two Component Coating without the Paint Gun
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 132.04ms
  • bvseo-msg: HTTP status code of 404 was returned;
Grouped product items
Product Name Qty
Eastwood 2K AeroSpray Spray Paint Epoxy Primer Black
In Stock
Eastwood 2K AeroSpray Spray Paint Epoxy Primer Gray
In Stock

Starting at$31.99

Save for Later
Performance and Durability of a Two Component Coating without the Paint Gun

90 day Warranty Included

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
Eastwood's 2K AeroSpray Epoxy Primer Gray & Black

Product Overview:


Use our 2K AeroSpray™ Epoxy Primer spray can to get parts and accessories ready for painting in one simple step. Eastwood developed this aerosol spray paint for DIYers who want to do high-quality work without investing in an HVLP gun. It contains the primer and activator in separate chambers. Once you activate it with the red button, the two components mix perfectly as you spray. The nozzle and valve create a fan pattern like that of a paint gun for excellent coverage.

For direct-to-metal applications, our epoxy spray primer will Do the Job Right. Choose from gray primer for body panels or black primer for chassis and frame painting. Both have 10-16 square feet of coverage with a 48-hour pot life once the can is activated. Since the paint can be stored for up to three years before activation, it’s okay to stock up and save. Check out the rest of our 2K paint for a complete aerosol-based paint job in your garage.

Eastwood 2K AeroSpray Epoxy Primer Features:

  • 2-Component Catalyzed Technology
  • Two Chamber Design Aerosol
  • Most Durable Aerosol Epoxy Primer Available
  • Sprays Like a Paint Gun
  • Available in black or gray

The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.

Can be applied over: steel, aluminum, fiberglass, body fillers, existing finishes
Do not apply over: self-etching primer, Lacquer
Pot Life: Approximately 48 hours after button is pushed and can is activated.
Ideal application conditions:Temperature between 70-85 degrees F at 50% humidity or less.
Approximate coverage: 10-16 Sq Ft

If you're sanding primer or body filler you have to check out the Eastwood Elite Contour DSB Dustless Sanding Block System that gives you laser straight panels while keeping you and your shop clean because it eliminates 95% of the sanding dust.


Made in Germany using Eastwood's poprietory technology. 60 day warranty, 3 year shelf life. 48 hour pot life after activation.

In the Box


12 Ounces net weight

Guides & Accessories

Safety Information

Always wear eye, skin and respiratory protection when using this product. Wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


Eastwood PRE Painting Prep
Eastwood Chassis Kleen 18 oz Aerosol
Eastwood Black Rust Encapsulator
Eastwood Rust Converter
Eastwood Aerosol-Injected Cleaner 11 oz
SAS Bandit Respirator

Application Tips

Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.


  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 17.87ms
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

I'll assume that I can use this aerosol product over/on top of Eastwood's After Blast without any issues?

Asked by: OlliejJohn
Yes, this can be used over our After blast without issues.
Answered by: Kelly H
Date published: 2022-10-28

Can Eastwood's 2K AeroSpray Epoxy Primer Gray, be used to paint over copper pipe?

Asked by: Ymmot
Yes, this can be used over Copper without issues. Just be sure to prep the surface accordingly and clean and degrease.
Answered by: Kelly H
Date published: 2022-06-27

Since any surface rust or rust pits need to be treated before applying this 2k epoxy spray primer, what is best to use to remove rust first without media blasting the area? Can you answer this question for hard to reach areas and places you can access.

Asked by: VW Restorer
Areas you cannot access- Internal Frame coting can be used. For areas you can access- one of our Encapsulators (especially our Platinum or Plus) would works best.
Answered by: Kelly H
Date published: 2022-05-20

Does this product need a top coat if being applied to the frame and undercarriage?

Asked by: Simon
Yes, this primer will need a topcoat in all applications.
Answered by: ZachC
Date published: 2022-05-12

Hi, can I spray base coat then clear coat over this?

Asked by: Allwheeldrive
You can certainly apply a basecoat followed by clear over this primer
Answered by: ZachC
Date published: 2022-10-10

Can I clear coat over the Epoxy primer with your epoxy clearcoat? what grip should I use to sand the primer before I clearcoat?

Asked by: Arnold
We do not recommend clear coating over the epoxy primer. We strongly recommend using one of our single-stage, base/clear, or 2K paints over the epoxy primer.
Answered by: ZachC
Date published: 2022-04-19

I’ve been refinishing a panel & after the body was straight I applied Eastwood 2K AeroSpray Epoxy Primer. I then applied several coats 2K Aerospray Urethane Primer and blocked it. I burned thru to metal on an edge about 1/64”x1”, what do you recommend?

Asked by: TimK
You will need to seal off any bare metal spots you have. Your best bet would be to do this with a coat or two of Epoxy over everything then- to have a uniform finish across your surface to start with.
Answered by: Kelly H
Date published: 2022-03-29

How many cans do I need to paint a motorcycle gas tank, one fender, and two airbox covers? basically, what's the square footage of one can if applied properly with enough product?

Asked by: GeoBor
These cans cover 10-12sq ft. each
Answered by: ZachC
Date published: 2023-02-24

I understand this can be used over bare metal, but can it be used directly over body filler such as Bondo? If not, do you sell a primer specifically to be used over body filler?

Asked by: Btn74
This product should have no issues with being used over properly prepped body filler.
Answered by: ZachC
Date published: 2022-02-23

I bought a project cat that the undercarriage was sandblasted years ago and was never primed. It has flash rusted since. Can I spray this epoxy over? It's just undercarriage

Asked by: Mike
You will need to treat any rust prior to spraying epoxy
Answered by: ZachC
Date published: 2022-02-18

Is it possible to attach a 360 spray nozzle to it so I can epoxy inside my rockers ? 

Asked by: Colt
The 360 spray nozzle is not designed to work with the epoxy primer
Answered by: ZachC
Date published: 2022-02-07

Is this okay to use on brake drums?

Asked by: Chris85085
Yes, this can be used on break drums.
Answered by: Kelly H
Date published: 2022-11-27

I’m repainted my powder coated aluminum motorcycle frame and wanted to make sure this would work. Sanding the entire frame is not possible but I can scuff it up with some 220 . Can I apply the epoxy primer over powder coating with a good 220 scuff ? 

Asked by: Buelligan
Yes, as long as the surface is cleaned and degreased.
Answered by: Kelly H
Date published: 2022-01-27

Will this work on windshield pinchwell with urethane seal

Asked by: Glenn57
Yes, this can be applied to the application in reference.
Answered by: Kelly H
Date published: 2022-01-19

Am thinking of this to respray an interior floorpan. It’s a mix of bare metal and sanded original primer/top coat after cleaning up some light rust. How many coats are recommended, & once cured what grade sanding are recommended before topcoating?

Asked by: SteveB
Technically, we can not guarantee compatibility between our products and products we do not sell (meaning the existing finish down already in this scenario).We would have to advise you to test a small area first anytime you are applying over an existing product. However, if you would like to proceed, you should sand with 180 grit paper and thoroughly clean and degrease before applying this primer. You have up to 12 hours to top coat this directly (with out the need to sand). After about 12 hours on average, it will have fully cured and would need to be sanded prior to top coating. If applying a solid color over- then 400 grit paper would be best. If applying a metallic or pearl over then 600 grit paper would be best.
Answered by: Kelly H
Date published: 2022-01-05

this is a 2 part primer.once I start using it doesit all have to be used or can i spray small amounts at different times

Asked by: Anonymous
Once activated this will have roughly a 48 hours pot life at a max.
Answered by: Kelly H
Date published: 2021-12-27

Can you put this product over top an SEM High Build Primer to touch up spots you may have sanded too much into body filler?

Asked by: RobBob
Yes, this can be used over the high build primer in reference without issues.
Answered by: Kelly H
Date published: 2021-12-14

Can the extreme chassis satin black be applied over the 2k Aerosol Epoxy primer? The chassis black specific primer has been on backorder.

Asked by: Brandon Lane
The Extreme Chassis can certainly go over this primer
Answered by: ZachC
Date published: 2021-11-09

Repairing fiberglass in engine bay. Can this be applied directly to fiberglass and over some existing paint that has been sanded? 

Asked by: Chadwick
If there is a gel coat down then yes. If one is not down- this would be needed prior to applying this primer. This primer is relatively safe over existing finish as long as it is properly prepped; but its always best to test a small area first.
Answered by: Kelly H
Date published: 2022-01-02

How soon after applying can it be dry sanded? Wet sanded?

Asked by: Purvy
On average about 12 hours for full cure until this is sandable.
Answered by: Kelly H
Date published: 2022-01-02

Is this a self-etching primer suitable for aluminum?

Asked by: Jordan
As labelled this is an Epoxy primer. This Epoxy primer can be used on aluminum surfaces as long as sanded according to the instructions and cleaned.
Answered by: Kelly H
Date published: 2022-01-02

Sandblasted some rusty Koni struts. Would this primer work well for this application, and must you topcoat it?

Asked by: Andy0x1
Yes, this primer would work well if the areas have been sandblasted down to bare clean metal. It will require a top coat like our 2k Ceramic Chassis Black.
Answered by: Kelly H
Date published: 2021-09-27

I am using this on aluminum wheels. After priming, what is the minimum time to wait before applying an automotive base coat / clear coat?

Asked by: Edward
We would recommend a minimum of about 15-20 minutes before applying anything over.
Answered by: Kelly H
Date published: 2021-09-17

Do I need to scuff this before applying filler?

Asked by: Will Mac
Yes, we do recommend scuffing this prior to adding filler over the top.
Answered by: ZachC
Date published: 2021-09-08

Was sanding some bad spots on my epoxy primer have some small bare spots can I use aero spray to fix the problem?

Asked by: Boomboom
Yes, this would be perfectly compatible and there would be no issues if it is any of our Eastwood Epoxy primers that was previously applied.
Answered by: Kelly H
Date published: 2021-08-21

After I spray this primer and it's dry to the touch, how long do I have to spray my 2K (14146Z) top coat without sanding?

Asked by: dsmit61
This needs to be top coated prior to 72 hours without the need to sand.
Answered by: ZachC
Date published: 2021-07-12

This is a direct to metal epoxy primer correct?

Asked by: JoeyD
This can go directly to metal.
Answered by: SeanW
Date published: 2021-07-07

What paints are compatible with the 2k AeroSpray epoxy primer black? e.g.- Dupli-Color Perfect Match Premium Automotive Paint Ford Royal Blue (KM) Aerosol 8 OZ BFM0340?

Asked by: KevinC

Can the epoxy primer be applied to an epoxy composite layup structure to the sanded surface?

Asked by: Glenn35826
  • y_2023, m_6, d_2, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_37
  • loc_en_US, sid_14149_bv32_Epoxy_bv32_Primer, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 134.24ms
We found other products you might like!
Eastwood's 2K AeroSpray Epoxy Primer Gray & Black

Starting at$31.99

In Stock