Available in dozens of colors, Eastwood’s Intermix Paint System custom mixed paint choices all feature the most modern automotive refinish technologies paired with premium raw materials in an incredibly user-friendly system that delivers beautiful results in a wide range of colors including classic solids and eye pleasing metallics.
Same quality formulation as Eastwood’s standard paint colors
Choose your own, unique one-of-one color
One kit makes up to 2 complete gallons
Use as a single stage or may be topcoated with clear
Approximate coverage: 125 SQ FT per gallon
Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
A unique shade of green, this color combines the big flakes and bright tones of Gasser Green with muted grays from Tunnel Ram Gray Metallic
May be used as a one-step single-stage topcoat, or in combination with Premium European or Premium Urethane Show Clearcoat for even better protection and a deeper gloss. Either way, this advanced urethane color system is the ideal choice to perfectly complete any restoration project, from antique and classics to more modern muscle cars and resto-mods.
*Due to the extra course metallic content, the use of a clearcoat is strongly recommended.
In the Box
Guides & Accessories
Reviews
Rated 5 out of
5 by
Donnie from
paint blend kitperfect color ive had hundreds of compliments on the color
Date published: 2023-06-09
Rated 1 out of
5 by
John from
Doesn’t paint very goodI bought this paint and had my car painted by a shop. The color looked great, and two weeks later it faded, and looked like sand paper, with tiger stripes. The car was resanded and repainted with a base coat clear. I really like the way it looked, but unfortunately it only lasted a few days, and the car looked horrible with the Eastwood paint. Spellcheck won’t even let me put the color.
Do you have any pictures of this color on a car? I tried searching the web and haven’t come across any.
Asked by: JustAsking
Unfortunately , we do not. The only photo we have to extend at this time is this speed shape spray out pictured on our website.
Answered by: Kelly H
Date published: 2022-12-19
What pressure and tip size are recommended for spraying?
Asked by: Jakbrk75
A 1.4mm-1.5mm nozzle would work best with this paint. We recommend paint gun pressure be set between 25-30psi at a regulator attached to the bottom of the paint gun. This will yield about 8-10psi exiting the air cap.
Answered by: Kelly H
Date published: 2022-09-02
My car isn’t going to be completely primed and will have some areas of original paint. Shouldn’t be sealed before base color? I don’t see any sealer on your website.
