Sturdy steel brackets for quick do it yourself workbench construction.
Construct the perfect bench for your garage with a custom shop table kit that makes every welding, cutting or shaping project easier. Instead of trying to “make it work” with a general shop table, you can design your own using our steel bench brackets. some lumber or steel tubing and a flat surface panel. These shop table corner brackets take the guesswork out of building your own work bench. Made from heavy-duty 3/16-inch thick structural steel, these brackets are designed to use 4x4 lumber or 2.5-inch square tube as legs, and 2x4 lumber or 2-inch angle iron as framing members for the table surface.
- Unpainted bare steel
- 3/16 inch Heavy Gauge 100 XF (Domex) Steel
- Laser cut and CNC bent for accuracy
- Bolt together with 4x4 and 2x4 lumber
- Weld together with 2.5in tubing and 2in angle iron
- 8 brackets in kit make 1 table
- You decide height and width of the table by the lumber or steel purchased.
With these sturdy steel brackets, you’ll have the basics for quick do-it-yourself workbench construction. These brackets are precision laser-cut and CNC-bent in the U.S. to ensure the legs and top will be parallel, plumb and square. Each kit includes eight brackets — all you need to do is add lumber or steel legs and a wood or metal work surface, then bolt or weld it together. See Contents sect for a full list of both required and optional material.Order a steel shop table bracket kit and make your workbench fit you instead of the other way around. You can paint or powder coat the bare steel for added protection and an even more unique look. Follow our workbench bracket system instructions or call Eastwood for expert advice. Make sure to check out the customer reviews and pictures submitted from satisfied customers.
(8) Workbench Corner Brackets
Required Materials (Not Included)
Legs = four 4x4’s x 36” Long (4)
Stringers (2 top, 2 bottom) = four 2x4’s x 86” Long (4)
Side Runners (2 top, 2 bottom) = four 2x4’s x 15-1/2” Long (4)
Cross Supports = four 2 x 4’s x 19-1/2” Long (4)
Top = one 4x8 sheet of ¾” Plywood (cut in half lengthwise) (1)
3/8 Carriage Bolts x 4-1/2” long (32)
3/8 Carriage Bolts x 2-1/4” long (32)
3/8 Nuts (64)
3/8 Washers (64)
2 lbs. #8, 2-1/2” Drywall Screws (1)
Optional Materials recommended for bench loads over 50 lbs. (Not Included)
Center Supports = four 4x4’s x 36” Long (4)
3/8 Carriage Bolts x 4-1/2” long (16)
3/8 Nuts (16)
3/8 Washers (16)
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov