DO THE JOB RIGHT.
Details
A shop table kit from Eastwood lets you build exactly the kind of workbench you need for your shop.
Workbenches sound simple, but each one can be a little bit different. We know very few people who follow the assembly instructions to a T — home fabricators usually make their own customizations or tweaks to a table to suit the types of tasks they want to get done.
- Unpainted bare steel
- 3/16 inch Heavy Gauge 100 XF (Domex) Steel
- Laser cut and CNC bent for accuracy
- Bolt together with 4x4 and 2x4 lumber
- Weld together with 2.5in tubing and 2in angle iron
- 8 brackets in kit make 1 table
- You decide height and width of the table by the lumber or steel purchased.
This workbench kit lets you build a shop table to your exact specifications, instead of trying to take a general table and make it work.
Featuring eight heavy-duty, sturdy steel brackets, this kit lets you assemble wood or metal into a reliable, durable workbench. It’s simple: Pick either wood or metal for your legs and surface frames, then use these brackets to join them together. You get to pick the height and width.
They are designed to use 4x4 lumber or 2.5-inch square tube legs, and 2x4 lumber or 2-inch angle iron for surfaces. Laser-cut and CNC bent for accuracy, they will help hold that table together for generations.
Contents
Includes
(8) Workbench Corner Brackets
Required Materials (Not Included)
Legs = four 4x4’s x 36” Long (4)
Stringers (2 top, 2 bottom) = four 2x4’s x 86” Long (4)
Side Runners (2 top, 2 bottom) = four 2x4’s x 15-1/2” Long (4)
Cross Supports = four 2 x 4’s x 19-1/2” Long (4)
Top = one 4x8 sheet of ¾” Plywood (cut in half lengthwise) (1)
3/8 Carriage Bolts x 4-1/2” long (32)
3/8 Carriage Bolts x 2-1/4” long (32)
3/8 Nuts (64)
3/8 Washers (64)
2 lbs. #8, 2-1/2” Drywall Screws (1)
Optional Materials recommended for bench loads over 50 lbs. (Not Included)
Center Supports = four 4x4’s x 36” Long (4)
3/8 Carriage Bolts x 4-1/2” long (16)
3/8 Nuts (16)
3/8 Washers (16)
Specifications
5 lbs each, 8.75 inches high with 6 inch wide mounting flanges
3/16 inch thick heavy gauge Domex steel (made in Sweden) corner brackets are the foundation of this kit. Laser cut and CNC bent brackets assure perfect 90 degree bench corners and parallel legs. Kit includes 8 brackets to build a bench any length, width or height you want while assuring the bench will be square and plumb. Brackets are designed to use 4 x 4 lumber for legs and 2 x 4 lumber for cross members or use 2.5 inch diameter tubing for legs and 2 x 2 x 1/4 inch angle iron for a weld up design.
Warranty
Steel made in Sweden, fabrication in USA
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Customer Reviews
Questions & Answers
You may also be interested in the following product(s)
-
Eastwood Benchtop Metal Cutting Bandsaw
$419.99 -
Eastwood 8 in Bench Vise
$223.99 -
Eastwood 6 in Bench Vise
$156.99 -
748 Piece Nut & Bolt Set ATD Tools 343
$179.99