- Eastwood Soda Blaster
Eastwood Soda Blaster
Eastwood Soda Blaster
Item #50095 Brand: Eastwood
The Eastwood Soda Blaster gives you the power to remove paint or other tough grime from sheet metal, glass or chrome without harming it. No harsh, toxic chemicals here: Just bicarbonate soda and air. This can also be adapted to use more abrasive materials, depending on the job.
This 2-in-1 soda blaster and abrasive blaster is the smart choice when you need to remove paint without harming sheet metal, glass or chrome. It converts in minutes to abrasives when your project needs more aggressive blasting for rust removal.
Soda blasting equipment removes paint without harming sheet metal, glass, or chrome. While expensive commercial soda blasters use high air volume, this affordable Eastwood soda blaster requires just 10 cubic feet per minute at 90 psi. This soda blaster provides a big 100-pound capacity at an affordable price. It includes a generous 8-foot blast hose with deadman valve, an all-steel welded, top-loading hopper and a pressure gauge. It rolls easily to any job site on two wheels, and readily converts between soda and aggressive abrasive blasting. Imported, patent pending.
- Requires as little as 10 cfm at 90 psi.
- 8-foot blast hose with deadman valve gives you optimal control.
- All-steel, welded, top-loading hopper and pressure gauge.
- 100-pound. abrasive media capacity.
- 50-pound soda media capacity.
- Unbeatable price for soda blasting equipment with this capacity!
More Uses for Bicarbonate Soda (Baking Soda) Blasters:
You can also use bicarbonate soda blast media (NOT household baking soda) to remove graffiti and grime from brick, concrete, limestone, granite and other surfaces. Other uses included cleaning of delicate substrates; architectural and industrial cleaning; paint stripping; corrosion removal. Use to remove mold and mildew stains from pools, cement, brick, tile, granite, sound stucco, siding and more. Soda blasting is also great for fire remediation. Safely strip paint from aircraft aluminum, trucks, motorcycles. Bicarbonate soda also allows heavy-duty removal of oils and grease from engines and floors.
The amount of household chores this brilliant blaster can get done will make it a valuable addition to your workshop.
Click Here to learn more about soda blasting.
100-lb.-capacity soda blaster comes complete, except for your compressor and air-fitting coupler to match your air lines. Simple bolt-together assembly will have you blasting in about 45 minutes. Four nozzles. Even includes last chance moisture trap. Approximately 36" high with handles, and about 24" in diameter, so it will easily store in the corner of your shop or garage.
(Q) Why use bicarbonate soda media?
(A) Soda will not harm glass, plastics, fiberglass or chrome surfaces. It's used to remove paint coatings from the vehicle surface without etching the surface or warping the metal like more aggressive media would. It's the best way to strip fiberglass Corvettes, boats or aftermarket hoods. Also used to remove paint from urethane and SMC-type bumper fascias.
(Q) Can this unit be used with more aggressive media?
(A) Yes, this unit can be converted to blast standard abrasive medias such as crushed glass, aluminum oxide, etc. by using the abrasive kit included.
Bicarbonate soda blasting is much safer than traditional abrasives, and more gentle to the metal or substrate you're blasting. However, you must still protect yourself from the dust and, more importantly, the particles of paint, corrosion or scale that become airborne during the blasting operation.
Use a properly fitted dust mask or respirator, safety glass or safety shield, plus heavy gloves, long pants and a long-sleeve shirt to protect exposed skin. Use our 50097 Soda-Blasting Protection Kit for complete protection.
Do not aim the nozzle anywhere other than the substrate you are blasting.
Make sure you disconnect the air line and allow the tank to bleed pressure before opening the fill cap.
Check the condition of the nozzle after every hour of blasting and replace once wear is visible or the blast stream becomes ineffective.
Before each use, inspect the tank for any signs of corrosion. Make sure the rubber hoses are not dry-rotted, cracked, split or show any other signs of wear or abrasion from use or storage. Do not use the unit until damage components are repaired. Call Eastwood at 800-544-5118 for replacement components.
Make sure the deadman valve is operating properly by depressing the valve lever and releasing; it must close over the nozzle under its own spring pressure. If not, do not use the deadman valve until the spring or obstruction is repaired.
Only use fresh Eastwood-brand Bicarbonate Soda Media to assure trouble-free blasting and quick paint removal.
1-year mfr's. warranty against defects.
All replacement parts available through Eastwood.
Designed, engineered and tested to Eastwood's specifications.
Final product imported.
11806 Automotive (Medium) Bicarbonate Soda Media
11807 Automotive (XL) Bicarbonate Soda Media
50494 Rust Remover Bicarbonate Soda with 20% Aluminum Oxide
12111 Replacement 2.5mm-I.D. Nozzles, 3-pack
50417 Galvanized Abrasive Media Funnel Strainer
50097 Soda-Blasting Protection Kit
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
Customers also viewed:
Our most affordable soda/abrasive blaster has 50-lb. media capacityOnly $213.99
Switch "on the fly" between soda and abrasive media...or combine!Only $399.99
100-lb. blaster has large, high-flow valves to speed rust/paint removal
Huge 200-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $238.99
50-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $141.99
USA-made 2-in-1 blaster works with as little as 10 cfm at 90 psiOnly $739.99