1 Year Warranty

Eastwood Swing Arm Tire Changer

Rim Diameter Range:
– External Clamping: 10” to 18”
– Internal Clamping: 12” to 21”
Maximum Rim Width: 16”
Maximum Tire Diameter: 45”
Turntable Rotation Speed: 6 RPM
Power Requirements: 120 VAC, 60hz
Air Supply Operational Range: 115 to 145 PSI [8 to 10 Bar]

This machine has a tire inflator only. Bead seating jets are not included on this model.

Eastwood Electronic Wheel Balancer

Rim Diameter Range: 10” to 24”
Rim Width Range: 1.5” to 20”
Maximum Tire Diameter : 34” [864mm]
Rotating Speed: 200 RPM
Measurement Cycle Time: 8 Seconds
Maximum Out of Balance Range: 0.25 to 35 Oz. [1 to 999 Grams]
Power Requirements: 120 VAC, 60hz. Tire Changer Ships via Freight, There is a Flat Rate Shipping Charge of $227.32
Wheel Balancer Ships via Freight, There is a Flat Rate Shipping Charge of $172.70

Liftgate Service: Is highly recommended, or sometimes required, for delivery of this product. If you have a safe method of unloading without a liftgate, you will have the opportunity to remove liftgate service at checkout. Please note that the truck driver will NOT assist in unloading the product for you. We are not responsible for personal injury or damage to the product resulting from unloading the merchandise without the benefit of a liftgate, delivery dock or forklift.

Eastwood Swing Arm Tire Changer

(1) Main Tire Machine Base Unit
(1) Vertical Tower
(4) M12 Nuts
(4) M12 Washers
(1) Slide Shaft Spring
(1) Plastic Cover
(20) Mount/Dismount Shoe “Duckhead” Replaceable Plastic Glides
(20) Mount/Dismount Shoe “Ducktail” Replaceable Plastic Glides
(1) Coiled Air Hose
(1) Gauge/Fill Gun
(1) 1/4” MNPT, Male Coupler
(1) Tire Iron
(4) Rim Protectors

Eastwood Electronic Wheel Balancer

(2) Guard Halves
(1) Tubular Steel Guard Frame
(4) M6 x 25 Bolts
(4) M6 Nuts
(2) Phillips Head Screws
(1) M10 x 45mm Bolt
(1) M10 Nut
(1) Main Drive Spindle
(1) M10 x 125 Socket Head Cap Screw
(1) 3 piece Tool Kit: 8mm & 5mm Hex Keys and a 10mm Flat Wrench
(3) Accessory Storage Posts
(3) Accessory Storage Post Protective Rings
(4) Spindle Hub Cones; 2”, 2.5” 3” & 4”
(1) Quick-Release Hub Wing Lock
(1) Balance Weight Pliers
(1) 100 gram Red Calibration Weight
(1) Wheel Width/Diameter Caliper
(1) Main Balancer Unit

Click here for Tire Changer instructions

Click here for Wheel Balancer instructions

Always read and fully understand the instruction manual before operating this unit. Always wear proper personal safety equipment while operating this unit.

Click here to see safety products