Are you working on a resto mod or just looking for a way to make under your hood different than all the others? The wait is over.
- Creates A Custom Textured Finish
- Fast Drying Formula
- Perfect For:
- Inner Fender Wells
- Under Hood Accessories
- Made in the USA
Coat your under hood components in Eastwood Textured Underhood Silver for that one of a kind look. Formulated from our original underhood black you can be reassured that this coating will last for years to some.
(1) 11 Ounce Aerosol Can
Gloss Level: Matte
Pre-Treatment: Clean area to be painted with Eastwood PRE Painting Prep (10041Z). Surface must be rust-free and dry prior to painting. For best results, prime with Eastwood Gray Self-Etching Primer (16114Z) or Epoxy Primer (14790Z), before top coating with Textured Underhood Silver. DO NOT use with enamel primers.
Mixing: Shake can Vigorously for at least one minute before use with occasionally during use.
Spray Passes: Apply two medium coats. Aproximate can coverage is 6 sq. ft. For best results, use between 70-90 degrees F (21-32 degrees C).
Spray Distance: Keep nozzle 8-10 inches from substrate.
Drying Time: Allow 1-2 hours in between coats. Allow 24 hours for full cure.
Storage: After painting turn can upside down and spray for two seconds to clear nozzle of paint, Discard empty can in trash, do not incinerate or compact.
Always wear proper personal safety equipment and work in a well ventilated area when using this type of product.
1 Year Warranty
Click here for the Eastwood Warranty Policy
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov