DO THE JOB RIGHT.
Details
This kit is a must when fabricating metal tubing.
Fabricate
- Roll cages
- Tube chassis
- Custom cross members
- Transmission mounts
- General shop projects
Kit Includes:
- 12485 Tubing Bender
- 21749 Tubing Notcher
- 20028 7 Piece Hole Saw Kit
Eastwood Tubing Bender
- Steel “Cage” Type Frame
- 8 Ton Hydraulic Jack
- Quick Change Dies
- Bends Up to 90 Degree Angles
Hydraulic tube forming machine bends steel and chromoly tubing in 0.75", 1.0", 1.5", 1.625" and 1.75" diameter with wall thickness from 0.049 to 0.090" up to 60 degrees. The hydraulic ram produces accurate bends with ease. If a 90 degree bend is required simply bend two 45's and weld together. Unit is supplied with ALL 5 dies and followers. Complete instruction book included.
Eastwood Tubing Notcher
- Holds up to 2” diameter round tube
- Uses standard hole saw blades up to 2-1/2"
- Compound angle adjustment up to 60 degrees in 1 degree increments
- Easy to read angle scales
Use with any drill motor hand held or drill press. Create any Angle Saddle Notch on Pipe for Weld Fit-Up. One Year Manufacturer's Warranty.
Hole Saw Kit makes clean, safe cuts in tubing. Suitable for cutting aluminum and steel tubing.
Includes
- 1 inch Hole Saw
- 1.125 inch Hole Saw
- 1.25 inch Hole Saw
- 1.375 inch Hole Saw
- 1.5 inch Hole Saw
- (2) Arbors
Specifications
Bending Capacity
Mild steel tubing: Bends up to 60 degrees in 0.75:, 1.0”, 1.5”, 1.625” and 1.75” diameter with wall thickness from 0.049” to 0.090”
Mild steel tubing: Bends up to 90 degrees in 0.75” and 1.0” diameter with wall thickness from 0.049” to 0.090”
Chromoly tubing: Bends up to 60 degrees in 0.75:, 1.0”, 1.5”, 1.625” and 1.75” diameter with wall thickness up to 0.040”
Chromoly tubing: Bends up to 90 degrees in 0.75”, 1.0” and 1.5” diameter with wall thickness up to 0.040”
NOTE: If a 90 degree bend in heavier wall tubing is required or a bend greater than 90 degrees- you can bend two pcs in small angles and weld together.
Warranty
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov