UNDERHOOD BLACK® Matte is the correct shade of black, having just the right matte finish many older car manufacturers used on radiator supports, inner fenders, firewalls, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a "factory-like" finish. This acrylic lacquer withstands up to 250° F and goes on thin for a smooth finish that will not hide surface details. Made in the USA. Coverage approx 6 sq ft. per can. 5%-9% Gloss Level.
Item #
12032Z-98160Z-98209Z-98257Z
BRAND: Eastwood
Eastwood UNDERHOOD BLACK® Matte Aerosol 11 oz
Brand:
Eastwood
In stock
SKU
12032Z-98160Z-98209Z-98257Z
Acrylic lacquer for an OEM-matching matte finish under the hood
- 90 day Warranty Included
- 90 Day Returns + 100% Satisfaction Guarantee
- FREE Lifetime Tech Support
QUESTIONS? Talk to an Expert: 
800-343-9353 | 
Chat | 
Email Us
QUESTIONS? Talk to an Expert: 800-343-9353 | Chat | Email Us
Frequently Bought Together
Total price for all checked items:
Description
What's Included
One 15 oz. aerosol can covers 8 Sq. ft, Max Temp 300F. Average car needs 3 to 5 cans.
Instructions & Guides
Ensure surface is clean, prior painting. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. DO NOT USE OVER SELF-ETCHING PRIMERS. Apply to surface about 8-10 inches from surface. It is better to apply several light coats than one heavy coat. Ideal conditions 70°F to 90F° at 50% humidity. Conditions will affect dry times. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If recoating after 36 hours, scuff surface with 320 grit abrasive.
Safety Information
Accessories
10041z PRE Painting Prep Eastwood Chassis Black Eastwood Ceramic Engine paints Spray Gray Detail Gray Aluma Blast Carb Renew Radiator Black
application_ax
Use Underhood Black for the correct matte black finish used on inner fender, fire walls, brackets, and more on many cars. Underhood Black is an acrylic lacquer and withstands up to 250 degrees F. Use PRE Painting Prep (10041 Z) to remove residual grease/oil before painting. Use Self Etch Primer (16014 Z) Aerosol or (16009 ZP) Quart on clean metal surfaces. Note: Underhood Black is a Lacquer Paint. Do not use with ENAMEL primers. Use these products in a well ventilated area, or use a respirator.
Eastwood UNDERHOOD BLACK® Matte Aerosol 11 oz
Starting at$55.97
In Stock