Item #
16181ZP
BRAND: Eastwood
Eastwood 4:1 Wimbledon White - Basecoat - Automotive Car Paint - Gallon
This classic off white Ford color is part of Eastwood’s Muscle Car Color Series
This classic off white Ford color is part of Eastwood’s Muscle Car Color Series
Eastwood Ceramic Engine Paint Matte Black Qt is rated
out of
5 by
1.
Customize this product:
This classic off white Ford color is part of Eastwood’s Muscle Car Color Series
90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Frequently Bought Together
Price for all checked items:
Product Overview:
Description
Eastwood Wimbleton White Basecoat Paint adds the superior durability of urethane to the ease of conventional basecoats.
- Apply a durable urethane finish wherever you live in the continental US, even CA
- Choose a fast, medium or slow Low-VOC Activator
- Makes 5 sprayable quarts
- Clearcoat is required on basecoat paints
- Mixes 4:1 with your activator choice
- Approximate coverage: 160 SQ FT
- Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
- Made in the USA
- This classic off white Ford color is part of Eastwood’s Muscle Car Color Series
Basecoat Paint Kit is a low-VOC system, so it meets regulatory limits in highly-regulated areas, eliminating the need to switch to a waterborne system.
Warranty
Specifications
BASECOAT PAINT MIXING RATIOS
Thoroughly mix four parts Low-VOC Urethane Basecoat with one part Low-VOC Urethane Activator. Use Fast (50308ZP) for small jobs, or temps below 75°F; Medium (50309ZP) for small jobs, or temps between 70-85°F; or Slow (50310ZP) for large jobs, or temps above 80°F. Keep in mind, other factors, such as humidity, air flow and total film thickness should also be considered. In many situations, it will be useful to add 10%-20% 50104ZP Zero-VOC Reducer to aid sprayabliity, flow and leveling. Remember, this is an activated basecoat system; only mix as much as is needed. Pot life is about 2 hours at 70°F.
PAINT GUN SET-UP
HVLP Gun: Fluid Tip 1.2-1.4 mm Inlet Spray Pressure 8-10 psi
Conventional Gravity: Fluid Tip 1.2-1.5 mm Inlet Spray Pressure 40-50 psi
Conventional Siphon: Fluid Tip: 1.3-1.6 mm Inlet Spray Pressure 40-50 psi
APPLICATION INSTRUCTIONS
Apply Low-VOC Urethane Basecoat color in two full medium wet coats with a consistent 50% overlap pattern. Allow five to ten minutes flash time between coats. Flash time should increase if additional coats are applied. Most colors will cover in two coats.
Basecoat should dry dust-free within 10-20 minutes. May be lightly sanded in as few as 20 minutes. Wait at least 30 minutes before wet sanding. Wait 45-90 minutes before taping on the fresh film. All dry times are approximate, at 70°. Temperature, air flow, total film thickness and other variable may extend these times.
In the Box
Contents
Urethane Basecoat, 1 gallon
Low-VOC Urethane Activator, 1 qt. (your choice of Fast, Medium or Slow)
Guides & Accessories
Instructions
Click here for product instructions
Safety Information
Accessories
PRE Painting Surface Prep
Low-VOC Gray Urethane Primer
12569 Concours Master Gun Cleaning Kit
12846Z Aerosol-Injected Cleaner
SAS Bandit Respirator
Gen-Nex Painters Coveralls
15639 Concours LT HVLP Paint Gun 1.3mm
Application Tips
Choose From A Fast, Medium Or Slow Low-Voc Activator
Reviews
Rated 5 out of
5
by
Alex pena from
Went on nice
When i received the paint i thought it was a more whiter base, when mixed looked alot more of a creamy still after the clear looks really nice classic color
Date published: 2018-04-17
Questions & Answers
Could I use Pearl necklace over this color or does the base have to be bright white?
We would recommend applying this over pure white for the best result.
Date published: 2021-04-05
who makes this paint for you PPG?
This paint is manufactured specifically for us here in the states- but we can not give out our direct manufacturer.
Date published: 2023-06-01
I'm painting the inside and outside of a 78 Chevy C/10 stepside and will need two gallons of paint. I will be painting in sections, as time allows, the cab/doors then fenders/hood then bed. Do I need to mix both gallons or can I use them one at a time.
We recommend mixing both gallons initially to make sure there are no batch tint differences.
Date published: 2019-11-02
O.K. (revised earlier question) I would like to order (2) Qty: of this color base. I have purchased the activator from Eastwood from a previous order (I don't need the activator) Can I purchase the base coat Only? If not, Why?
This product is available to purchase just the basecoat without the activator.
Date published: 2019-01-26
I only need to purchase the 2 gallons of base, I already have activator. Will I receive 2 FULL gallons of paint with my order?
This product is one gallon of the Urethane Base Coat and one Quart of the Urethane Activator.
Date published: 2019-01-26
Do you offer a color chip of your actual paint in Wimbledon white? I want to be sure it's a good color match for my '66 Ford F100. I've tried using the Duplicolor version in a spray can for painting a few accessories and it's not even close to matching.
We do have a chip chart with that color. Check out this link for a free chip chart. https://www.eastwood.com/how-to-paint-a-car
Date published: 2018-09-05
I have a 1965 ford mustang coupe. The factory color is whimbeldon white. Base coat Approximately how much paint will I need? Also my interior is bright red in a satin finish Do you carry this paint for the interior in a spray can or quart can?
Generally speaking if you are only painting the outside of an average car on gallon will do. If you plan to paint underhood, jambs, etc then we recommend two gallons.
Date published: 2018-09-02
We found other products you might like!
Eastwood 4:1 Wimbledon White - Basecoat - Automotive Car Paint - Gallon
From $246.98
To $249.98
In Stock