close
Find Anything, Fast!

Need Support or Have a Question?

Click Here
  • Home
  • Eastwood ElastiWrap Aerosol Gloss Clear
Eastwood ElastiWrap Aerosol Gloss Clear is rated 3.5 out of 5 by 4.
Rated 5 out of 5 by from Excellent! I needed to protect some parts of my car. I don't intend to peel it off but, just in case, I bought the Elastiwrap. I have the matte, gloss and pearlizer. Wasn't sure what it would look like so I bought all three. It sprayed on very nicely in my cool garage. I let it dry overnight. Since then, I have washed my car several times and it stays on. I like it.
Date published: 2017-06-30
Rated 5 out of 5 by from Excellent product!! Ram 2012 gloss clear and metal gray, excellent product!! Very happy!!
Date published: 2015-06-09
Rated 3 out of 5 by from Clear orange peel Did not flow out very well and dried to a very rough orange peel finish. Turned foggy in some areas when laying it on thick, trying unsuccessfully to get it to flow out and setup more smoothly. But, maybe the room temperature was too high, going to try again.
Date published: 2014-06-17
  • y_2018, m_6, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_15068Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Can i spray this on the hood of my factory painted vehicle as sort of clear bra protector?

Asked by: ADub
You certainly can apply this product to your factory painted hood. Just make sure to put 5-6 coats on to make the product peelable.
Answered by: Scott C
Date published: 2018-06-13

Is this product being discontinued? If so, will you be replacing it with a product that is similar?

Asked by: Dales Cab Company
This product is being discontinued and we do not have a replacement product.
Answered by: Scott C
Date published: 2017-11-16

Can this be applied over bare steel?

Asked by: sydude
This product should not be applied over bare steel.
Answered by: S Church
Date published: 2017-09-28

Can elastiwrap gloss clear be sprayed over burn out black to get a gloss finish.

Asked by: Iceman3406
Yes, that was the overall design for the products if you wanted a gloss finish
Answered by: SeanA
Date published: 2017-06-15
  • y_2018, m_6, d_20, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_15068Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood ElastiWrap Aerosol Gloss Clear

Eastwood ElastiWrap Aerosol Gloss Clear

Item #15068Z Brand: Eastwood

Our flexible rubber coating is High Build so you Need Less and resists higher temperatures than similar products
Quantity:
Quantity: close

In stock

Only $8.99

Sale $1.98

< Back

Details

You can keep ElastiWrap® on indefinitely or if you’re tired of the color, just peel it off and spray on a different color. That’s right, peel it off. It doesn’t harm the painted or bare surface underneath.

  • ElastiWrap® is high-build and requires fewer coats than similar products
  • Also available in gallons and quarts
  • High temp resistant up to 350 degrees F
  • Applies easily with HVLP sprayer, Turbine, roller or brush
  • Scratch and abrasion resistant
  • Easy to touch up
  • Removes easily
  • Intermix Compatibly System – mix colors to create your own shade
  • UV resistant exceeded 539 hours of QUV testing (ASTM D4587)
  • >

Elastiwrap protects surfaces from UV damage, scratches and corrosion. Spray the high-build rubber coating on an unfinished surface to protect it until it’s ready to paint. Spray it directly on glossy clear coats, paint, unfinished metal and other surfaces for color and protection. The uses are endless for ElastiWrap®.


More info...
< Back

About Eastwood ElastiWrap Aerosol Gloss Clear

ElastiWrap® is a unique strippable rubberized coating that can be easily applied over most substrates and can remain in place indefinitely or be removed by simply peeling it off. ElastiWrap's high build formula requires fewer coats and removes easier than similar products. Not only is ElastiWrap® corrosion resistant, it's UV, scratch and abrasion resistant too, and stable in extreme temperatures up to 350 degrees.

Don't see the color you're looking for?

Customize your own colors using Eastwood ElastiWrap ®quarts, gallons and exclusive 2-Color Intermix System!


Contents

Net Weight 11 ounces


Accessories

14933Z ElastiWrap Surface Prep aerosol
14969 Microfiber cloth 3 pack
13375 Soft Edge Masking tape
11844 Canvas wheel masks
14878 Eastwood Turbine paint System
14829 Respirator
20406 Coveralls XL


Safety

Always wear eye, skin and respiratory protection. Apply in a well ventilated area away from open flame. Consult MSDS for specific safety and storage precautions.


Warranty

Made in USA


Application

Apply to clean dry surface. Use Eastwood's PRE Painting Prep to remove embedded grease and oils. For easy removal of ElastiWrap, apply over glossy painted surface. Clean painted surface with ElastiWrap Surface Prep. Shake can for at least one minute and occassionally during use. Apply in even coats, allow 10 to 15 minutes between each coat. Number of coats and build thickness is up to the user. recommend at least 3 coats to acheive opacity


< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: