Item #
20644
BRAND: Eastwood
Eastwood Electric Throatless Metal Cutting Shear
Heavy-duty professional quality metal shear
Heavy-duty professional quality metal shear
Eastwood Mako Blue Single Stage Automotive Car Paint - Intermix Kit is rated
out of
5 by
16.
Heavy-duty professional quality metal shear
1 year Warranty Included
Add an Eastwood Service Plan for additional protection?
Learn More
The Eastwood Service Plan
Protect your purchase with comprehensive coverage
24/7 support
No deductibles, no additional fees
Parts & labor costs included
Transferable coverage and more
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Product Overview:
Description
The Eastwood Electric Throatless Shear is a heavy-duty professional quality tool ruggedly designed for many years of reliable service.
- High performance motor
- Throatless design
- Tungsten carbide blade
- Cuts 18 gauge steel, 22 gauge Stainless and 16 gauge aluminum
It features a high-performance, high-torque, ball bearing motor design with a replaceable blades and brushes for efficient operation and long life. Easily cuts up to 22 gauge stainless steel, 18 gauge steel, and 16 gauge aluminum. Throatless design allows tight curves to be cut with ease.
Warranty
Specifications
Maximum Material Thickness | 22 ga. Stainless, 18 ga. Mild Steel, 16 ga. Aluminum |
Strokes per minute | 1800 |
Minimum Cutting Radius | 1.5” |
Blade Material | Tungsten Carbide |
Power Requirements | 120V AC~60Hz, 3.5 amps |
Motor Construction | Fan cooled, ball bearings, replaceable brushes |
In the Box
Contents
- (1) Throatless Electric Shear
- (1) Hex Key
- (1) Spare Motor Brush set
Guides & Accessories
Instructions
Safety Information
Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Accessories
Application Tips
Reviews
Rated 5 out of
5
by
Jimmy from
Great Metal Shears
I bought these shears with very low expectations due to the price. I’ve always used the more expensive shears that are 4 times the price, and all I can say is wow. These preformed flawless and cut everything I needed. When the time comes to replace them I will definitely be purchasing these again!
Date published: 2022-01-18
Rated 5 out of
5
by
Johnny from
Easy to use
I've only used it on thin sheet metal, but it works well so far.
Date published: 2021-10-17
Rated 5 out of
5
by
Dans Rugged Pipe from
Good shear
Built well and has handled everything I have thrown at it.
Date published: 2021-07-28
Rated 5 out of
5
by
Marl from
Nice tool,Cuts recommended gauge metal..
Have only used once,Was glad to have this tool.. Will use in near future..
Date published: 2017-12-19
Rated 4 out of
5
by
Steve from
Works well for a hand held device
It is quite a bit faster than using a cutoff wheel. However, if there is a moderate amount of bend in the sheet metal it doesn't do as well. You can get it cut but it requires a little more work.
The blade adjustment is. 075" for 20 guage sheet, but feeler guages don't have that. I used a tight .008" and it cuts what I need.
I learned that you have to start with the jaws against the sheet metal and be ready to move when you turn it on. It vibrates to much to start off your cut line.
I have cut several pieces of 20ga. steel and I am happy with it.
Date published: 2023-05-30
Rated 4 out of
5
by
David P from
Like a knife through butter
Slices through metal like a knife through butter. It's a little difficult to control, which is why I gave it 4 stars instead of 5.
Date published: 2022-05-20
Rated 4 out of
5
by
Homeowner from
Nice Tool
First use was to cut up sheet metal from the outside of an old water heater. Worked great. Pros: quality tool. Cons: Blade adjustment takes care and time.
Date published: 2022-05-17
Rated 4 out of
5
by
Pat J from
Shear
This works good,but is very heavy, hard to handel and the switch is not easy to use and in the wrong place.
Date published: 2022-02-11
Questions & Answers
Will these shears cut .063 aluminum sheets?
These shears will cut up to 16 gauge aluminum.
Date published: 2021-08-27
You're selling the throatless shears ,why not the replacement blade. Is this a throw away product or are you guaranteeing it will not break
The replacement blades should show up on the right of the page with in the frequently bought together. If for some reason it does not here is a link to the page. These certainly are not throw away units. https://www.eastwood.com/replacment-blades-for-electric-throatless-shear.html
Date published: 2021-08-22
do you sell replacement brushes? If not where can they be purchased?
Unfortunately we do not have any replacement brushes sold separately for this item.
Date published: 2018-05-03
are replacement jaws available for this?
The replacement cutting dies are part number 20523.
Date published: 2018-04-18
Will this cut corrugated metal sheets used on steel buildings?
As long as you stay within the specs of metal thickness this unit can handle you should be fine.
Date published: 2017-12-22
Where is it made? USA?
This tool is designed in house but manufactured in China.
Date published: 2018-04-18
Looking to cut sheet metal into strips and wanted to know if this leaves clean edges that do the need to be ground down to avoid cuts.
This tool will leave clean edges.
Date published: 2019-01-19
Will this cut plastic? What thickness?
Eastwood Electric Throatless Metal Cutting Shear
$80.99
In Stock