Find Anything, Fast!

Need Support or Have a Question?

Click Here
  • Home
  • EW 2K Aerosol High Gloss Clear
EW 2K Aerosol High Gloss Clear is rated 4.3 out of 5 by 69.
Rated 5 out of 5 by from Excellent Nozzle technology These 2K can have some of the best nozzle technology. The paint always comes out consistent and smooth. The clear is thick and durable. One can should be able to cover a car door 2x.
Date published: 2018-06-18
Rated 5 out of 5 by from Outstanding paint! Worked like a charm! Other paints were not working out at all so I switched to Eastwoods paint. Used this paint to do the gas tank and it worked out great!
Date published: 2018-05-30
Rated 5 out of 5 by from I used this on my custom steering wheel. I purchased this clear coat finish about three months ago. I used for two coats of finish on the custom burl walnut steering wheel I built from scratch. After many hours of work I was a little nervous and in the end very happy with the result.
Date published: 2018-03-27
  • y_2018, m_6, d_21, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_69
  • loc_en_US, sid_14148Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

do I have to sand the base coat before application? Can I use it on a powdercoted bumper?

Asked by: Hiram
Having to sand the basecoat prior to clear depends on many variables with letting the base cure being the most common. You can certainly clear over powder coat as long as you abrade the powder first to give a mechanical bond for the clear to adhere.
Answered by: Scott C
Date published: 2018-06-11

will this work over rustoleum GLOSS WHITE ENAMEL ?

Asked by: DEAN M
Since we have never tested over Rustoleum it would be impossible to say 100% if it will be okay without reaction. The tricky part is that Rustoleum is a non-catalyzed product and this 2 part catalyzed paint could potentially react with it causing lifting and wrinkling.
Answered by: Scott C
Date published: 2018-05-30

Hello! I am painting a bare aluminum 3" tube. I plan to use Aero Spray 2K epoxy matte clear coat and Aero Spray 2k gray epoxy primer. I have a specific color requirement. Can I use Tamiya AS-26 acrylic lacquer spray as a color coat?

Asked by: ZombieSNIPER666
Since we have never tested with other brand paints it would be impossible for us to say if it will work or not. A quick tip to minimize any chance of reaction would be to give 24 hours between your color and the clear coat.
Answered by: Scott C
Date published: 2018-05-21

I purchased 6 cans of Eastwood 2K high gloss clear...can I successfully apply over VHT High Temp Metallic Engine Paint without undesirable chemical reaction.....suggestions please...Thanks Boj

Asked by: Bojs
Since we have never tested it would be impossible for us to say 100% if it will work. One recommendation I can give from personal experience is to let the first paint sit and dry for 24 hours. Then at 24 hours start putting the clear on. This has worked very well for me in the past.
Answered by: Scott C
Date published: 2018-05-07

What rattle can matching base coat paint will this product work with. I need to paint a bumper on a Dodge Grand Caravan with paint code PXR.

Asked by: Hayden
Unfortunately as we have tested with other brand paints it would be impossible for us to say. If you can find a water based base coat it will minimize any chance of reaction.
Answered by: Scott C
Date published: 2018-05-03

What spray can product-if any- would you recommend to add a measure of clear protection to a new "triple chromed" VW beetle bumper to help it last longer?

Asked by: Deddie49
Our Exo Amour or Shark hide products we sell would be perfect.
Answered by: Scott C
Date published: 2018-04-24

Can this be used for restoring headlights? Is it plastic safe and UV blocking?

Asked by: subaruguy
This is UV blocking and can be used to restore head lights as long as an adhesion promoter is used first.
Answered by: Scott C
Date published: 2018-04-24

Will this product work on sanded down to bare carbon fiber panels? If not will the adhesion promoter help?

Asked by: Charles
This clear will work fine over properly sanded carbon fiber.
Answered by: Scott C
Date published: 2018-04-17
  • y_2018, m_6, d_21, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_100
  • loc_en_US, sid_14148Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

EW 2K Aerosol High Gloss Clear

EW 2K Aerosol High Gloss Clear

Item #14148Z Brand: Eastwood

Precision of a 2-component coating without the paint gun
Quantity: close

In stock

Only $22.99
< Back


Eastwood 2K High-Gloss Clear Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years.

  • 2-Component Catalyzed Technology
  • Two Chamber Design Aerosol
  • Most Durable Aerosol Epoxy Primer Available
  • Sprays Like a Paint Gun
  • Approximate Coverage 5.4-8.1 SQ FT
  • Max Temperature: Paint will handle up to 250-300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting

The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.

More info...
< Back

About EW 2K Aerosol High Gloss Clear

Spray Passes: 1-2 spray passes with 50% overlap. Approx. 1.2 mil per spray pass. 3-7 minutes flash between coats, depending on temperature.
Drying: Full cure in 12 hours at 68 degrees F, 35-40 minutes at 140 degrees F (IR drying)
Pot Life: Approximately 48 hours after button is pushed and can is activated.
Ideal application conditions:Temperature between 70-85 degrees F at 50% humidity or less.


12 Ounces net weight


Eastwood PRE Painting Prep
Eastwood Chassis Kleen 18 oz Aerosol
Eastwood's 2K AeroSpray™ Epoxy Primer Gray
Eastwood Black Rust Encapsulator
Eastwood Rust Converter
Eastwood Aerosol-Injected Cleaner 11 oz
SAS Bandit Respirator


Always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


Made in Germany using Eastwood's poprietory technology. 60 day warranty, 2 year shelf life. 48 hour pot life after activation.


Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.

< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: