EW 2K Aerosol High Gloss Clear

Item #14148Z Brand: Eastwood

Precision of a 2-component coating without the paint gun

Qty:

Quantity:

In stock

Only $24.99

Add to Wishlist

Details

Eastwood 2K High-Gloss Clear Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood proprietary technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years.

2-Component Catalyzed Technology
Two Chamber Design Aerosol
Most Durable Aerosol Epoxy Primer Available
Sprays Like a Paint Gun
Approximate Coverage 5.4-8.1 SQ FT
Max Temperature: Paint will handle up to 250-300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting

The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.

More info...

About EW 2K Aerosol High Gloss Clear

Spray Passes: 1-2 spray passes with 50% overlap. Approx. 1.2 mil per spray pass. 3-7 minutes flash between coats, depending on temperature.
Drying: Full cure in 12 hours at 68 degrees F, 35-40 minutes at 140 degrees F (IR drying)
Pot Life: Approximately 48 hours after button is pushed and can is activated.
Ideal application conditions:Temperature between 70-85 degrees F at 50% humidity or less.

12 Ounces net weight

Accessories

Eastwood PRE Painting Prep
Eastwood Chassis Kleen 18 oz Aerosol
Eastwood's 2K AeroSpray™ Epoxy Primer Gray
Eastwood Black Rust Encapsulator
Eastwood Rust Converter
Eastwood Aerosol-Injected Cleaner 11 oz
SAS Bandit Respirator

Safety

Always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings

Warranty

Made in Germany using Eastwood's poprietory technology. 60 day warranty, 2 year shelf life. 48 hour pot life after activation.

Application

Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65