Item # 13520ZP BRAND: Eastwood

Eastwood CONTOUR® Premium Autobody Body Filler .8 gal

1-step filler actually inhibits rust
and self-etches, to save you time
1-step filler actually inhibits rust
and self-etches, to save you time
Eastwood CONTOUR® Premium Autobody Body Filler .8 gal is rated 4.6 out of 5 by 64.
  • y_2022, m_8, d_9, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_2, bvpage2n
  • co_hasreviews, tv_6, tr_58
  • loc_en_US, sid_13520ZP, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 87.84ms
  • REVIEWS, PRODUCT
$84.99
Loading...
Loading...
Save for Later
1-step filler actually inhibits rust
and self-etches, to save you time

90 day Warranty Included

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
Eastwood CONTOUR® Premium Autobody Body Filler .8 gal

Product Overview:

Description

Contour® 1-step Premium Body Filler actually inhibits rust and self-etches!

  • Rust inhibitors prevent corrosion
  • Self-etching properties create excellent adhesion
  • Superior coverage and feather-edging ability
  • 1-step process; no glazing putty required

Save time in your shop with our "all-in-1-step" custom-blended premium body filler. It contains rust inhibitors to prevent corrosion long after painting, and its unique self-etching properties bite into the surface for maximum adhesion. A great "1-2 punch" to help finish bodywork faster and more effectively!

Warranty

90 Day

In the Box

Contents

Filler 102.4 oz /.8 US gallon/ 3 liters and Hardener: 2.75 oz/.78g

Guides & Accessories

Safety Information

Always wear eye, skin and resp[oratory protection when using this product always apply in a well ventilated area. consult MSDS and product label for specific safety warnings

Accessories

Application Tips

Surface must be clean and free of wax, grease and debris. Abrade surface using 36 grit, or finer. Thoroughly mix desired amount of material with 2% liquid hardener. Do not exceed 1/4" depth. Allow to cure 15 min before sanding. Abrade with 40-80 grit and follow up with 120 grit to desired contour 5. If necessary, apply Eastwood’s Polyester Glazing Putty (13521zp) for final finishing. Topcoat with quality primer such as Eastwood’s Epoxy or Urethane Primers. Do NOT return catalyzed material back into can.

Reviews

Rated 5 out of 5 by from contour premium body filler I like contour body filler because it goes on smooth and sands just as smooth and easy
Date published: 2021-10-06
Rated 5 out of 5 by from Best filler ever Best filler I've used. Easy to mix and apply and sands beautifully. I totally recommend it. LOVE EASTWOOD PRODUCTS!!!
Date published: 2021-09-28
Rated 5 out of 5 by from Awesome Filler Goes on smooth and sands even smoother. It’s honestly my favorite body filler. My favorite thing about this filler is that it dries fairly quickly.
Date published: 2021-09-27
Rated 5 out of 5 by from Best filler Easy to use, spreads daily and sands smooth. There were no pinholes or air bubbles. I will buy this one again.
Date published: 2021-09-23
Rated 5 out of 5 by from Best body filler on the market I’ve used just about any body filler you can imagine and absolutely nothing compares to the superior quality of Eastwood’s contour body filler. Smooth as almost self leveling easy and begginer friendly application. Easy sanding and shaping qualities. Well worth the price.
Date published: 2021-07-24
Rated 5 out of 5 by from Great filler Works great, smooth filler does very well and works easy
Date published: 2021-06-18
Rated 5 out of 5 by from Easy to apply, easy to sand Great product. Goes on very easy, sands very easy, sticks very well.
Date published: 2021-06-11
Rated 5 out of 5 by from Sands great, Easy to Mix and Use After using Bondo brand filler for some of the body work in recessing caddy tailights in my s10 and then trying this, the difference was night and day. Easy to tell when mixed. Filler is yellow in color and catalyst is blue. It turns a green color when mixed thoroughly. Sets up in 15 minutes or so. Sands like a dream compared to Bondo brand. I am, saving a lot more money on sand paper now and it feathers out very easy and lays down flat. It looks like the older 1 star reviews were from 9 years ago when they initially had the catalyst and filler blue and white and it was harder to tell when mixed. They have changed it now so don't worry. My only gripe is the cream harder that comes with it seams to no be enough to do the entire gallon of filler and it doesn't seem possible to get more hardner. I have about 1/4 of my gallon left of filler and and getting very low on the harder in which I have been using the recommended amount
Date published: 2020-12-13
Rated 5 out of 5 by from Great filler Love this filler. Sands smooth with little effort.
Date published: 2020-10-25
Rated 5 out of 5 by from Good filler I really like this filler. It sands and feathers beautifully. Using the blue hardener with the yellow filler makes it easy to tell when it's thoroughly mixed and about what ratio of hardener to filler was used. The brighter the green, the quicker you have to work.
Date published: 2019-09-07
Rated 5 out of 5 by from Works good, sands better. There is nothing wrong with this product, it was very, very easy to use.
Date published: 2019-05-06
Rated 5 out of 5 by from Smooth Love this so smooth and easy to use great filler and great price
Date published: 2019-03-15
Rated 5 out of 5 by from Wonderful product I highly recomend! The filler actually works better then I expected, its a bit runnier then other products I have used in the past but I am sure that helps with the blending process. I also notices that it takes less hardener then I am used to, so beware how much you add as it flashes really quick.
Date published: 2019-02-08
Rated 5 out of 5 by from great filler Love this product, tried some others but they do not feather out like this does. It is a little more runny which took a couple of tries to get used to. but now i wished i would have bought sooner.
Date published: 2018-08-27
Rated 5 out of 5 by from Easy to use Spreads easily, and sands well. It is easy to get a smooth surface, to cut down on sanding. I highly recommend it.
Date published: 2018-06-22
Rated 5 out of 5 by from Body filler Yes I had bought two 25.3oz contour premium body filler . The first can didn't work so great . Until I got to know how to use it better . Now it works great. So I got a therid can . But I am going to get a gallon of it . Next time .
Date published: 2018-01-18
Rated 5 out of 5 by from Contour Body Filler Excellent filler-highly recommend.-with all the fillers I have used over the years-none perform like this product...
Date published: 2018-01-06
Rated 5 out of 5 by from Awesome product great filler! Purchased this after I watched Eastwood live( I know) mixes easy, spreads even easier. Sanding is a breeze .i am old school Bondo hah. This is great stuff will never purchase Bondo again.
Date published: 2017-12-07
Rated 5 out of 5 by from Great Product! I haven't done much body work since I was 18 reconstructing quarter panels with Kmart Bondo. This stuff sands like silk, very few pin holes if mixed properly. great feathering characteristics.
Date published: 2017-07-07
Rated 5 out of 5 by from Great Body Filler I've been doing body work for over 40 yrs. and this filler is great. I like that it's smooth and lite, and when applied it doesn't leave alot of pin holes like others.
Date published: 2017-07-04
Rated 5 out of 5 by from great filler I have been using Rage Gold for years and it's expensive. I saw this on the Eastwood site and thought I would give it a try being its almost half the price as Rage Gold. I just bought one gallon of the Contour and wish I had ordered several more. The color is yellow and the hardener was blue. Spreads nice and smooth, no pin holes. I let it set a few minutes and them test it with a small piece of 40 grit. After about 10 minutes or so, I sand it and use a TIG welding rod to smack out what builds up in the paper. Sands quickly and easily. I then let it get harder and use 80 and 120 to finish.
Date published: 2016-12-04
Rated 5 out of 5 by from best stuff best stuff - used others - this is superior really
Date published: 2016-08-08
Rated 5 out of 5 by from Love this stuff I had been out of the game for years so to speak. I had always used Rage in the past. Tried this product and I love it! VERY smooth. To me it is easier to work than Rage. Feathers out like a dream.
Date published: 2016-08-06
Rated 5 out of 5 by from Best Body Filler I've Used I've tried a variety of different body fillers on my old car/truck restorations. Eastwood's body filler has always performed consistently better than all other body filling products available elsewhere. And the filler has always been very durable. No cracking, no flaking off, no problems adhering to properly prepared surfaces. A must for all quality body work.
Date published: 2016-07-27
Rated 5 out of 5 by from Great Stuff I have used other body fillers and by far this is the best to use. Sands easy.
Date published: 2016-06-21
Rated 5 out of 5 by from Best stuff there is. I needed a good sandable filler to shave my entire engine bay on my Rsx, I didn't know what to go with so I searched YouTube, I found Kevin Detz' awesome how to videos and went with Eastwood. This stuff is so easy to work with even for beginners.
Date published: 2016-01-29
Rated 5 out of 5 by from Solid Bonding, Easy to Apply I'm building a Chopped 52 Chevrolet and I used this for the body work. Excellent Bonding Characteristics. It spreads very smoothly with no air bubbles. Sanding was a little harder if you waited longer, but it smooths out very nicely. Excellent Product that I highly recommend.
Date published: 2015-12-14
Rated 5 out of 5 by from Makes me look good. This filler makes me look better than I am and I like that. I follow Kevin Tetz's instructions and have had no problem but good results.
Date published: 2015-12-01
Rated 5 out of 5 by from very good stuff I am restoring my 58 Dodge an this is the best stuff, it will mix great an the thing I like is the creamy texture . It goes on so creamy smooth an it will sand great. I also like to use the re surfer . It will help get the straight panels in shorter time.
Date published: 2015-09-30
Rated 5 out of 5 by from Good stuff Goes on smooth and creamy, sets up fast, easy to sand and no need for putty
Date published: 2015-09-08
  • y_2022, m_8, d_9, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_2, bvpage2n
  • co_hasreviews, tv_6, tr_58
  • loc_en_US, sid_13520ZP, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 38.71ms
  • REVIEWS, PRODUCT

Questions & Answers

The vehicle I'm working on is my daily driver. Can this be left on the vehicle that is left in the elements?

Asked by: Logan B
It would not be recommended.
Answered by: Kelly H
Date published: 2021-10-01

Can this product be used to replace the lead filler at the quarter panel to roof panel seams?

Asked by: Hector69Chevelle
A better option for this would be this reinforced filler found here: https://www.eastwood.com/ew-contour-alum-repair-compound-25-3-oz.html
Answered by: Kelly H
Date published: 2021-09-16

Was in the process of blocking this filler off my truck with bare panels and got caught in the rain, will water affect this if it's already hardened?

Asked by: Ch413
If fully cured, water will not affect this product, just make sure it is fully dry before applying any further coats.
Answered by: Caleb M
Date published: 2021-09-14

Is the hardener that goes to this also item# 50779z?

Asked by: Badgirl
Yes, the hardener is included with this product.
Answered by: ZachC
Date published: 2021-12-14

Can this be sprayed over 2k epoxy primer?

Asked by: Ted5
This is not a sprayable product
Answered by: ZachC
Date published: 2021-08-25

what can of temperature can your body filler take

Asked by: glenn
About 200F at an absolute max.
Answered by: Kelly H
Date published: 2022-04-01

after removing the vinyl top found there was a previous repair to a couple of rust spots ( quarter size), they had just put filler over the holes. is contour the best choice for the roof, after patching the holes. will be putting a vinyl top back on

Asked by: rtech2366
You would be better off using a reinforced filler for an application such as this like this filler here: https://www.eastwood.com/ew-contour-alum-repair-compound-25-3-oz.html
Answered by: Kelly H
Date published: 2021-07-16

Can You thin Contour Body Filler? What product would you use - lacquer thinner?

Asked by: StarckMad
This product can't be thinned.
Answered by: SeanW
Date published: 2021-12-14

Can I get just the hardener for this. If so whats part #

Asked by: Mmarshall67
If you are in need of just the hardened please reach out to us at help@eastwood.com.
Answered by: ZachC
Date published: 2021-04-09

Can I use the Contour Premium filler over existing 50 year old paint that is in good condition, but I want to achieve really straight panels?

Asked by: Fornut
It is recommended to remove the old paint before applying the Contour Premium Filler to ensure a good bond and eliminate future material failure.
Answered by: vince
Date published: 2021-02-22

My rear brake drums are very deeply pitted, if I fill them with your contour filler, will the heat from braking cause the filler in the pits to fall out

Asked by: Gary
Eastwood's Contour filler is not recommended for your application due to the heat extremes. We recommend Eastwood's Lab Metal(10207Z) as this product will withstand temps as high a 350 to 400 degrees. This product can be thinned with Lab Metals Lab Solvent(10208ZP) for easier spreading and filling. Go to www.eastwood.com and type in #10207Z on the search bar for full description, photos and pricing.
Answered by: vince
Date published: 2021-10-20

At what temperature is it best to apply body filler?

Asked by: Lew40
60 degrees Fahrenheit would be the lowest temp to apply a body filler with 75 to 80 degrees Fahrenheit with low humidity being ideal so as not to trap moisture between the filler and the panel.
Answered by: vince
Date published: 2021-01-13

Can this be used to smooth out a repair on an SMC panel after the damage has been reinforced with epoxy resin and fiberglass mat?

Asked by: Georgie
Our body filler would be perfect to use for a final finish of a repaired SMC panel.
Answered by: Scott C
Date published: 2021-01-03

Can you use this on the bottom of a fiberglass boat

Asked by: Andy123
It can be used on fiberglass but it should not be exposed to water.
Answered by: John S
Date published: 2020-08-17

Can this be applied over an aluminum surface and hold adhesion?

Asked by: AmishPlumber
Our body filler can certainly be used on aluminum surfaces that have been properly sanded and cleaned.
Answered by: Scott C
Date published: 2020-07-23

Can this, or any of your fillers be applied on top of fully cured epoxy DTM primer?

Asked by: Jimbo1979
You can certainly apply body fillers over our epoxy primer. This is a great way to quickly seal the bare metal and then work the dents as you have time.
Answered by: Scott C
Date published: 2021-07-02

can this filler be applied over rust encapsulator?

Asked by: keith
Yes, this can be applied over Rust Encapsulator.
Answered by: Gary H
Date published: 2021-02-04

Where can I purchase more of the blue cream hardener for the Eastwood Contour Body Filler #13520? I can't find a separate part number online for it. Thank you

Asked by: John
Please contact our Sales team at: 800-343-9353 to obtain these.
Answered by: Kelly H
Date published: 2021-02-26

Looking for a filler to be applied near the shock towers in the engine bay that wont crack off with a slight flex when I take a hard turn. I have already sprayed your epoxy primer over rust encapsulator. Is this product what I'm looking for?

Asked by: Redd
We would recommend the use of Bumper Bite Flexible Glaze Puddy. Item #14389ZP https://www.eastwood.com/sem-bumper-bite-flexible-glaze.html
Answered by: Bob G
Date published: 2020-03-15

I have a chevy truck bed, typical rust on bed wells. I am planning to sand down exterior and remove rust, as much as possible. then apply white encapsulator. if needed, can I fill/level panels with the premium filler? if so before or after encapsulator?

Asked by: shaggy
For the Encapsulator to do what it is designed to do- it needs to come in direct contact with the present rust. Body filler would have to be applied on top.
Answered by: Kelly H
Date published: 2022-03-19

What is the shelf life of this product?

Asked by: Mark
As long as stored in a temperature controlled environment and sealed we would warranty the product for a year from the purchase date.
Answered by: Kelly H
Date published: 2019-07-19

How can I be sure I am  mixing the filler and hardener properly. I will be using about 250 ml (1/3 of a 25 oz can) at a time.

Asked by: chevy47
If your mixing a 1/3 can of body filler, then you would use 1/3 of the tube of hardener. We also have a video on how to mix body filler. https://www.youtube.com/watch?v=i2zCiyNu8wU
Answered by: Bob G
Date published: 2019-08-04

Can I use this filler product of yours over the top of a existing bondo job, someone originally put on the car to repair some body work, I just want to touch up the area with 1/8 inch of filler?

Asked by: JasonG
We can not guarantee adhesion with our products and products we do not sell. For best results we would advise you to remove as much of the existing as possible or test a small area first.
Answered by: Kelly H
Date published: 2019-11-08

Can I apply the Polyester body filler over the Rust Encapsulator platinum? Also, can I coat over the body filler with a line-x material?

Asked by: Joe L
Yes, body filler can certainly be applied over top of the Platinum. We can only guarantee compatibility with bed liners that we sell- but our can certainly be applied over top.
Answered by: Kelly H
Date published: 2020-04-23

Can this be used on plastic parts?

Asked by: Tommyc
Yes, it can be used on plastic in small amounts. A better product to use would be the Contour Glazing Putty. http://www.eastwood.com/eastwood-contour-glazing-putty.html
Answered by: Bob G
Date published: 2019-05-16

I'm restoring a grader/snow plow. I've taken it down to bare metal except where there are very small pin holes. Can I apply this material over the pin holes even though there is still paint, primer and possible rust?

Asked by: Raven
In your pin hole areas, if there is any rust in the pin holes, they will need to be treated with something like rust encapsulator. A better product to fill pin holes would be Metal To Metal, item #10021ZP. This product is water proof and much stronger then regular body filler. https://www.eastwood.com/metal-to-metal-filler-quart-with-hardner.html
Answered by: Bob G
Date published: 2019-03-14

Item #14757ZP does this come with hardener in the quart or is it sold separately?

Asked by: bbww
The Eastwood Contour Body Filler does come with a Cream hardener. If you would happen to need more hardener, it may be purchased separately. Item # 14064. https://www.eastwood.com/body-filler-cream-hardener-red-2-75oz-tube.html
Answered by: Bob G
Date published: 2019-02-02

How long after applying in proper temperature can I subject to outside winter temps?

Asked by: DamianC
This product can be exposed to colder temperatures after 20 min.
Answered by: SeanW
Date published: 2019-08-30

How long is the Eastwood Contour Body Filler workable after adding the hardener? I have used other fillers, but I always seem to end up with a wad of filler hard on the board before I get it spread.

Asked by: Finally Its Ed
On average it's about a 10 minute working period once mixed.
Answered by: Kelly H
Date published: 2019-01-04

what is the lowest recommended application temperature for your polyester fillers?

Asked by: peashooter03
We do not recommend applying our fillers below 60F at an absolute minimum.
Answered by: Kelly H
Date published: 2019-01-05
  • y_2022, m_8, d_9, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_64
  • loc_en_US, sid_13520ZP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 86.51ms
  • QUESTIONS, PRODUCT
Eastwood CONTOUR® Premium Autobody Body Filler .8 gal
$84.99
In Stock