- Home
- Eastwood CONTOUR® Premium Body Filler .8 gal

Eastwood CONTOUR® Premium Body Filler .8 gal
Eastwood CONTOUR® Premium Body Filler .8 gal
Item #13520ZP
and self-etches, to save you time
Details
Contour® 1-step Premium Body Filler actually inhibits rust and self-etches!
- Rust inhibitors prevent corrosion
- Self-etching properties create excellent adhesion
- Superior coverage and feather-edging ability
- 1-step process; no glazing putty required
Save time in your shop with our "all-in-1-step" custom-blended premium body filler. It contains rust inhibitors to prevent corrosion long after painting, and its unique self-etching properties bite into the surface for maximum adhesion. A great "1-2 punch" to help finish bodywork faster and more effectively!
Contents
Filler 102.4 oz /.8 US gallon/ 3 liters and Hardener: 2.75 oz/.78g
Accessories
Eastwood Contour Glazing Putty
PRE Painting Prep
13919 Eastwood Filler Spreaders
31273 Eastwood Filler Mixing Board
31160 Dura Block Sanding Blocks
34186 Paintucation DVD Set
13748 Eastwood 6 Inch Palm Sander
43120 Eastwood Work-Fender Stand
Application
Thoroughly mix desired amount of material with cream hardener. Using a clean spreader, fill to desired level. Do not exceed 1/4" depth. Allow to cure for at least 15 minutes before sanding. Abrade with 80-grit and follow up with 120-grit to achieve desired contour. Final finish with finer abrasives. If necessary, apply Eastwood’s 13521ZP Contour™ Glazing Putty for final finishing. Topcoat with quality primer, such as Eastwood’s Epoxy or Urethane Primers.
CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.
Safety
Always wear eye, skin and resp[oratory protection when using this product always apply in a well ventilated area. consult MSDS and product label for specific safety warnings
Warranty
Made in Canada to Eastwood's strict specifications and quality standards
Application
Surface must be clean and free of wax, grease and debris. Abrade surface using 36 grit, or finer. Thoroughly mix desired amount of material with 2% liquid hardener. Do not exceed 1/4" depth. Allow to cure 15 min before sanding. Abrade with 40-80 grit and follow up with 120 grit to desired contour 5. If necessary, apply Eastwood’s Polyester Glazing Putty (13521zp) for final finishing. Topcoat with quality primer such as Eastwood’s Epoxy or Urethane Primers. Do NOT return catalyzed material back into can.
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65

Customer Reviews
Questions & Answers
Customers also viewed:
-
Maintains good color hold-out on steel, aluminum, fiberglass, body fillers
Starting at: $46.98
-
Maintains good color hold-out on steel, aluminum, fiberglass, body fillers
Starting at: $43.98
-
Sands all types of flat and contoured surfaces; use wet or dryOnly $65.99