Item #
50215ZP
BRAND: Eastwood
Eastwood 3:1 Electric Yellow - Single Stage - 96oz
Brand:
Eastwood
In stock
SKU
50215ZP
Eastwood 3:1 Electric Yellow - Single Stage - 96oz is rated
out of
5 by
15.
Premium true acrylic urethane topcoat;
exceptional long-lasting beauty
exceptional long-lasting beauty
- 90 day Warranty Included
- 90 Day Returns + 100% Satisfaction Guarantee
- FREE Lifetime Tech Support
QUESTIONS? Talk to an Expert: 
800-343-9353 | 
Chat | 
Email Us
QUESTIONS? Talk to an Expert: 800-343-9353 | Chat | Email Us
Description
Eastwood Electric Yellow is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.
What's Included
Makes 1 Sprayable Gallon When Mixed 3:1 With A Required Activator #21856ZP Medium Temp Urethane Activator 32 oz Less than 80F
Instructions & Guides
Safety Information
Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.
Accessories
21856 ZP activator required. 50250 ZP Urethane Clear and 50251 ZP Activator 50240 ZP Urethane primer and 50241 ZP Activator 12817 Paint accessory kit, 19830 Respirator, 20406 coveralls 12454Z Block sanding kit, 20491 3-gun set 20472 Air managemnet system
application_ax
Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70Ö. HVLP gun setting 8-10psi 1.4-1.8mm tip. This color is designed to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours.
Rated 5 out of
5
by
Mike from
Good Gloss
Seems high quality, flows out nice, doesn't run easily, use reducer to help flow. This Color is translucent, best to use all white primer underneath it, or you need like 5-6 coats. Does collect bugs or dust particles, so have well filtered paint area.
Date published: 2022-08-03
Rated 5 out of
5
by
Triumph80 from
Great Color!
Paint went on great, it made my first time painting a car very pain free. The Color is awesome too & looks very deep & shiny for a single stage.
Date published: 2021-12-17
Rated 5 out of
5
by
BOBN from
Fantastic Paint but Not Enough Information on it Published in Documentation
This is fantastic paint but I painted over half of my car (stripped of all doors, hoods, etc.) before I realized something was wrong. I normally shot Dupont enamels. Well this paint is nothing like that. I shot it at 28 psi like that of the Dupont enamels. It turned to dust but I kept on shooting and looking for the wet paint and I would get it but then it bubbled up all over. I spent time researching it online to find out I had to shoot it at around 10-12 psi. That then did it and I used the Eastwood reducer also. After this was determined I sprayed many other parts that came out just great.
Date published: 2021-09-08
Rated 5 out of
5
by
Fast Frank from
Beautiful eye catching color that stands out and is the nicest yellow color
Very bright color and an eye catcher
Date published: 2021-08-19
Rated 5 out of
5
by
DianneC10 from
The color is so bright and vibrant
The electric yellow was the exact color I want for my 1969 Chevy SWB Stepside. Perfect!
Date published: 2018-07-02
Rated 5 out of
5
by
lloyd from
Looks amazing
Thus yellow is awesome and has great great coverage! Covers and hides tons of imperfections.
Date published: 2018-03-13
what to use to clean paint gun
Hello, we recommend using Eastwood Paint Gun and Equipment Cleaner - Item # 16154ZP-16155ZP.
Date published: 2025-04-15
What type of primer is best for this paint
A good quality (Eastwood) Epoxy Primer or Urethane Surfacer. Always best if possible to choose a color closest to your topcoat. Like with Yellow, maybe a beige or gray rather than black.
Date published: 2025-02-17
Is the required activator included? Thanks
3:1 Single stage Topcoat system, requires 21856ZP activator.
Date published: 2023-04-17
How long do you have to wait to redcoat after it has dried?( after 18 hrs has passed)
After 18 hours you can topcoat any time after the surface has been abraded for adhesion.
Date published: 2022-03-02
Can you cut and buff the single stage? If so how much time needed before you start?
Single Stage can certainly be cut and buffed and should be done after 18 hours.
Date published: 2022-03-02
Can I use a reducer with this product?
Yes, any of our Urethane reducers we sell can be used with this paint. This can be reduced up to 20%.
Date published: 2022-02-15
Eastwood 3:1 Electric Yellow - Single Stage - 96oz
Sale
$116.97
Reg.
$140.99
Save
$24.02
In Stock