Item #
11461
BRAND: Eastwood
Eastwood Flux-N-Solder
Promotes adhesion of our lead-free
or lead-based body solder
or lead-based body solder
Promotes adhesion of our lead-free
or lead-based body solder
or lead-based body solder
Promotes adhesion of our lead-free
or lead-based body solder
or lead-based body solder
None Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Product Overview:
Description
Eastwood Flux for Lead Free Body Solder - Designed specifically to promote adhesion of our Lead-Free Body Solder. Etches and bonds to steel surfaces while providing an ideal layer of tin. Easy brush-on, heat, and wipe application. Can be used with your oxy/acetylene or propane torch. 1 lb jar.
In the Box
Guides & Accessories
Safety Information
Accessories
Application Tips
Easy Brush-On, Heat, And Wipe Application
Reviews
Rated 5 out of
5
by
Anonymous from
Highly effective, quality product
I was referred top this brand by a colleague, so this was my first time using this brand. After a thorough study of the product, I purchased the Flux-N-Solder to simplify the process of soldering small objects that require a strong bond. I am a gunsmith which requires my work be solid for safety reasons as well as practicality and aesthetics. A customer asked to have an M16 extractor installed on his Rem 700 bolt. In doing so, the old extractor must be removed, the bolt face must be recessed and a filler ring installed (soldered) into place. What is critical about this product and this particular job is that when a trigger is pulled on a rifle, the firing pin hits the primer of the cartridge at the very location where the soldering has taken place. This causes a very small explosion of the primer which sets off the propellant (gunpowder) and creates an immense amount of pressure (40-65K PSI). So a strong bond must be retained shot after shot.... no if's, ands, or buts about it. Eastwood
Flux-N-Solder is holding up nicely. THAT puts this product to the test and says a lot about its performance!
Date published: 2023-09-14
Rated 5 out of
5
by
tbad from
flux n solder
Used it for the first time without any problems. Was really easy to apply, just had to stir a little to get the heavy partilcles to the top. Just had to heat and wipe came out great.
Date published: 2018-11-23
Questions & Answers
Is this as good as tinning butter for lead solder? If not when will tinning butter be available?
This product can certainly be used with lead filler as well. The tinning butter is due in the next couple of days.
Date published: 2019-05-19
What’s the difference between this and the tinning butter?
The Flux and solder is designed for used with Lead Free filler.
Date published: 2017-11-20
Can this be used to retin copper pots and pans?
This is outside of our Test parameters and we cannot comment if it would work in your application.
Date published: 2017-07-10
I want to use lead-free solder over some areas that have rust holes. I've already treated the rust. Can this be used over rusted areas that have been treated with your Rust Converter or Rust Encapsulator? Or does it have to be clean bare metal?
Most flux will need to be applied straight to metal. I would recommend getting some cylindrical wire brushes and knocking down the rusted area best you can.
Date published: 2015-07-08
Is this an acid-free solder paste?
Yes it is acid free
Date published: 2019-07-02

Eastwood Flux-N-Solder
$62.99
In Stock