JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
90 day Warranty Included
100% Satisfaction Guarantee Since 1978 We stand behind our solutions and customers.
Stop rust in its tracks! Our Silver Rust Encapsulator has been formulated with SUPERIOR corrosion resistance to "hardware store rust paints"!
You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
Low 2-10% gloss Silver Rust Encapsulator. As easy to apply and as durable as our popular Red and Black. Perfect under metallic and gray finishes.
Q: Can Rust Encapsulator be applied with the Undercoating System?
A: Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the 16017ZP Heavy-Duty Anti-Rust (Qt.). This waxy, oily product flows into pinch welds and through rust to seal surfaces from contact with moisture and air, but cannot be painted over, so it's only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.
Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rust Encapsulator can 10-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.
In places where little or no surface prep can be done, our Internal Frame Coating or Heavy-Duty Anti-Rust (16017ZP) is actually a better choice for applying into blind areas such as box sections.
