Item #
11283
BRAND: Eastwood
Eastwood Skip Proof Spot Weld Cutter Kit
Includes three 3/8"-dia. cutters, 2 "skip-proof" pilot bits, and case
Includes three 3/8"-dia. cutters, 2 "skip-proof" pilot bits, and case
Eastwood Skip Proof Spot Weld Cutter Kit is rated
out of
5 by
13.
Includes three 3/8"-dia. cutters, 2 "skip-proof" pilot bits, and case
None Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Product Overview:
Description
Skip-Proof Spot Weld Cutter Set effortlessly drills-out spot welds
Three 1-piece cutters make clean cuts through spot welds, without damaging the bottom panel, with little or no grinding required to finish the job. Pilot bits included to prevent skipping.
- Three 3/8"-dia. cutters (0.090" wall)
- 2 skip-proof pilot bits
- Storage case
In the Box
Contents
- Three 3/8"-dia. Cutters (0.090" wall)
- 2 Skip-Proof Pilot Bits
- Arbor
- Storage Case
Guides & Accessories
Safety Information
Accessories
Application Tips
1-Piece Cutters Make Clean Cuts Through Spot Welds, Without Damaging The Bottom Panel, With Little Or No Grinding Required To Finish The Job
Reviews
Rated 5 out of
5
by
RedJohn from
Buttery
I never take the time to review things unless they are absolute trash, or awesome. And this is awesome and worth the money 100%. I tried 4 other of “the best” spotweld cutters and they are all in the trash now.
Date published: 2023-07-16
Rated 5 out of
5
by
D Morse from
Spotweld cutter
I cut about 40 spotwelds per cutter and put a new centering bit in on every other cutter
Date published: 2021-09-02
Rated 5 out of
5
by
Smarter then the tool from
Better then the rest.
I’ve used all different kinds of spot weld the past 30 years. They all have their pros and cons. However I always end up back to these every time. I center punch the weld first, drill a pilot hole, then make sure you apply plenty of pressure and drill at low speed. Stop when you hear the pop or see the panels separate. I’m still on my first cutter and I’ve done at least 5 sets of pickup bed sides and a dozen rocker panels. If you try and cut through the weld at too much of a hi-speed or at a angle the cutter WILL over heat and lose its edge or fetch up, crack and break. just like drill bits. They all will.
Date published: 2021-01-10
Rated 5 out of
5
by
Duster Dave from
Better than advertised...
I'm sceptical about how well tools are said to work, but in this case , better than advertised. The only time I had any problems was if I was not straight to the weld I was cutting. Pilot error. So we'll worth the money. Get to know how it works before you complain about it.
If you have any problems, its you, not the tool. Thank you
Date published: 2018-06-30
Rated 5 out of
5
by
Al H from
Best cutter I've ever used.
This set is far and away the best cutter I've used. The first head went through well over 60 cuts. Did use WD-40 for oil. Am on my second of the three cutters now. The pilot bit works well, in that it does not drill all the way through. This is helpful for welding the new material onto the piece you are trying to save. The key to this cutter is PATIENCE. Let the tool do the work. Don't force it.
Date published: 2015-03-07
Rated 4 out of
5
by
wudman from
Skip-proof spot weld cutter
I am very pleased with this tool. It takes plenty of patience to use this tool, especially on 65 year old spotwelds. I think you need to add a small brochure on the proper use of this tool.
Date published: 2015-04-29
Questions & Answers
can you order just the 3/8 spot weld cutters if needed more
Yes, those are available in 3/8", and the item number is 11277.
Date published: 2025-02-03
Does the pilot bit create a hole through the both panels?
The depth of the pilot bit can be adjusted to how far you will need to drill through.
Date published: 2022-05-07
Are the 3/8 Cutters Guaranteed? On the 4th weld, the first one Broke?
This product carries a one year warranty.
Date published: 2022-05-07
Is there a 5/16 cutter tip that can be ordered for this kit? I have kit already and it is great, but some welds need a little smaller cutter. Thanks, Ron
This is available in 3/8th only at this time.
Date published: 2022-05-07

We found other products you might like!
Eastwood Skip Proof Spot Weld Cutter Kit
$83.99
In Stock