Item # 19783ZP BRAND: EverCoat

Evercoat® Featherfill G2 Black Gallon

Need more filler over self-etching primers? Use FeatherFill® G2™
Need more filler over self-etching primers? Use FeatherFill® G2™
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 67.36ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$149.99
Loading...
Loading...
Save for Later
Need more filler over self-etching primers? Use FeatherFill® G2™

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
Evercoat® Featherfill G2 Black Gallon

Product Overview:

Description

Feather Fill G2 is a high solids polyester primer surfacer that is VOC compliant. It is specially designed to hold down body repair areas and provide an excellent foundation for any paint system. It has excellent adhesion to fiberglass, SMC, body filler and wood surfaces.

  • High Build Formula with minimal texture on surface
  • Excellent adhesion to fiberglass, SMC and wood
  • Fast Dry-to-Sand time reduces cycle time
  • Waterborne compatible and VOC compliant
  • MEKP Activator included

Many shops commonly apply self-etching primer to bare metal surfaces. But most polyester fillers and epoxy primers should not be applied directly over self-etching primers. So what do you apply when you need additional filling? Feather Fill G2 is the answer.

Specifications


SUBSTRATES:
Fiberglass
SMC
Rigid Plastics
Body Filler or Putty
Epoxy Primer
Self-Etch Primer (extends dry-to-sand time)

NOTE: All bare metal areas larger than one inch in diameter must be treated with a high quality self-etch or epoxy primer.

MIXING:
- Shake and stir thoroughly before mixing
- Add one tube (.75 fl. oz.) liquid hardener to one quart of Feather Fill or 2% by weight and mix thoroughly
- Pot Life is 35 minutes @ 75°F (24°C)
- Do not leave product in the spray gun for longer than 45 minutes

APPLICATION:
- Use a primer gun with a 1.7 to 2.2 fluid nozzle/air cap (Spray at paint gun manufacturer’s recommended air pressure)
- Apply 2-3 medium wet coats allowing 5-10 minutes flash time between coats

FINISH:
- Ready to sand in 75-90 minutes depending on film build
- Applying over self-etch primer could add 4-6 hours to the dry time
- Once dry sand Feather Fill with 400-600 grit sandpaper prior to next step

In the Box

Contents

1 Gallon of Black FeatherFill®
4 Tubes of activator

Guides & Accessories

Instructions

Click Here for Data Sheet

Accessories

14065 Additional Hardener

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 9.44ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

Can this be applies and then sanded later like a month and then top coated with base and clear coat and foes the sur face have to be sanded be for you aply it thanKS

Asked by: Paul
Since this is a polyester primer it is not recommended to leave this exposed as it can absorb moisture when left exposed. It would be best to sand it and then seal it with epoxy primer if you will be letting it sit for some time.
Answered by: Scott C
Date published: 2018-04-02

Can this be applied over urethane primer? I media blasted my car and immediately primed it with epoxy and two coats of a 2k urethane to protect it while I do the body work. To get more build I then sprayed this product to blend in my body work. Am I ok?

Asked by: johnk
Yes, this can be applied over top of a Urethane primer.
Answered by: Kelly H
Date published: 2017-10-23

Can this product be sprayed directly over epoxy primer?

Asked by: Zcsrson
This product can certainly be applied directly over epoxy primer.
Answered by: S Church
Date published: 2017-09-26

Can a single stage urethane paint be put over top

Asked by: Tru47
Yes, you can apply Urethane paint directly over this surface...
Answered by: KHoffnagle
Date published: 2016-04-04

Can this be used over bare-metal

Asked by: Chuck I
All bare metal areas larger than one inch in diameter must be treated with a high quality self - etch or epoxy primer.
Answered by: Chuck I
Date published: 2018-08-07

can this be applyed over bare steel and fiberglass?

Asked by: bobby cartwright
It can be applied over properly prepped fiberglass. All bare metal areas larger than one inch in diameter must be treated with a high quality self-etch or epoxy primer.
Answered by: MikeL
Date published: 2018-01-15
  • y_2022, m_7, d_5, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_19783ZP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 88.34ms
  • QUESTIONS, PRODUCT
We found other products you might like!
Evercoat® Featherfill G2 Black Gallon
$149.99
In Stock