It's a Flanger, and a 7/32" Punch, in one handy pneumatic tool
- Produce 0.040" offset flanges
- Punch 7/32" diameter holes
- Requires 4 cfm at 90 psi
Double-action head swivels to let you create flanges and holes from any angle with just a squeeze of the handle.
About Flanger/Punch Tool Pneumatic 7/32in
2-in-1 pneumatic tool saves space in your metalworking toolbox! One side of the double-action head produces 0.040" offset flanges on 20-gauge metal or thinner for clean welding with little grinding. The other side produces perfectly clean 7/32"-diameter holes that are ideal for plug welding; punches holes 1/4" from the panel edge in up to 16-gauge. Unique swivel-head design lets you work from almost any angle.
The Pneumatic Flange and Punch Tool produces a 0.040" offset flange for flush repairs up to 20-gauge, or punches clean 7/32" holes in up to 14-gauge steel. Requires 4 cfm at 90 psi. NOTE: The center of the hole produced is 1/4" from the panel edge.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov