Fuji Spray Mini-Mite 3 PLATINUM - T-75G System 2803-T75G

The Mini-Mite 3 PLATINUM system includes the Fuji T-Model gravity spray gun. Fuji installs the same powerful 3-stage turbine motor as used in Q3 models. The MM3 PLATINUM does not have the patented noise-reduction feature as seen on the Fuji Q-Models, however the noise level is no more than any other standard HVLP turbine. The MM3 PLATINUM turbine develops approximately 6psi. This is more than enough pressure to spray all known coatings (when properly thinned) and all the newer water-based coatings. The T-75G spray gun is non-bleed and features a side-mounted pattern control knob (to adjust the size of the fan pattern) and 600cc gravity nylon cup. The standard air cap set #3 (1.3mm) is for the use of general purpose fine finishing. Easy to maintain. Perfect for professional or beginner. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with gun holder. Portable and powerful. The system includes the Mini-Mite 3 PLATINUM turbine, 25ft Hi-Flex hose, T-75G non-bleed spray gun, viscosity cup, cleaning brush, wrench and 24 page user manual. What’s new in the Mini-Mite PLATINUM Series? The Fuji Spray Heat Dissipation Chamber: Fuji Spray has designed a unique method of removing any heat build-up from the turbine case. Excess heat is channeled to a Heat Dissipation Chamber located at the rear of the case. Fuji Spray Noise Reduction Covers: The Mini-Mite PLATINUM turbines are equipped with a method to reduce noise. The Noise Reduction Covers house the Filters.

The Mini-Mite 3 (MM3) system with Gravity Gun includes the new Fuji T-Series Spray Gun featuring a Pattern Control Knob to adjust the fan size from small to large. Fuji installs the same powerful 3-stage turbine motor as used in Q3 Models. The MM3 does not have the patented noise-reduction feature as seen on the Fuji Q-Models, however the noise level is no more than any other standard HVLP turbine. The MM3 Turbine develops approximately 6psi. This is more than enough pressure to spray all known coatings (when properly thinned) and all the newer water-based coatings. The Spray Gun included with this package is the T-75G Gravity with 600cc cup. The standard Air cap set #3 (1.3mm) is for the use of general purpose fine finishing. Easy to maintain. Perfect for professional or beginner. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with Gun Holder. Portable and powerful. The system includes the Mini-Mite 3 Turbine, 25ft Hi-Flex™ hose, T-75G Non-bleed Gravity Spray Gun with 600cc cup, viscosity cup, cleaning brush, wrench and 20 page user manual.