Application:

Work independently

• High efficiency thanks to brushless motor
• Handy, short and lightweight tool
• 3-piece set ? in fabric bag:
  • 1 cordless impact wrench
  • 1 quick charger
  • 1 Li-ion rechargeable battery 18 V ? 2.5 Ah (Ampere hours)
• There are three power stages to choose from for torque tightening:
  
  • Stage 1 100 Nm at 0 – 700 rpm (0 – 1200 impacts/min)
  • Stage 2 190 Nm at 0 – 1600 rpm (0 – 2000 impacts/min)
  • Stage 3 220 Nm at 0 – 2500 rpm (0 – 3200 impacts/min)
• Amperage without load: 4.5 Ampere
• Brushless DC motor (BLDC):
  
  • Longer service life, less wear, no need to change the carbon brushes
  • High efficiency and hence less battery consumption
  • More compact motor enables smaller dimensions
• Illumination of the work area before the output begins to move
• Net weight: 0.96 kg (without rechargeable battery)
• Dimensions including rechargeable battery: 228 x 63 x 135 mm
• Including belt clip, attachable on both sides, and hand strap
• Recommended torque: 220 Nm
• Sound power level: 110.6 db(A) Lp W
• Vibration acceleration: 15.40 m/s2
• Loosening torque (max) determined with screw size M: 16
• Output: 3
• Net weight: 1.34 kg
• For impact operation
• Tightening torque max Nm: 220 Nm
• Loosening torque maximum [Nm]: 270 Nm
• Sound pressure level: 99.6 dB(A) Lp A
• Revolutions per minute: 0 – 2500

Do you know – Li-Ion batteries:

• Do not have any memory effect
• Consist of cells with 3.6 V each
• After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible

Attention: For a longer lifetime of the battery please store it charged up to 50 to 80 % only

• Have an energy density which is twice as high as nickel cadmium batteries, for example
• Have a nominal voltage three times higher than a nickel metal hydride battery
• Require multiple complete charging cycles to reach full capacity
• Number of tools: 3