Holley's Mid - Mount accessory drives are now available for small block Ford engines! The foundation of the accessory drive is a one - piece CNC machined cast front cover with integrated bracketry and water pump housing for the cleanest appearance . Attached to the front cover is a p remium and modern A/C compressor , power steering pump , one - wire 150 amp alternator, and a C7 - style water pump cartridge that’s driven by a single serpentine belt . This compact accessory drive occupies a minimum of space to fit in virtually any chassis that will receive a small - block Ford engine. Available in natural cast and black powder coated finishes.

Holley's Mid - Mount accessory drives are available for small - block Ford engines!

The Mid - Mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a "bracketless" mounting design - the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. This premium alternator utilizes 6 - phase technology as found on the C7 Corvette and only require a one - wire hookup . The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. The compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. The design provides two heater hose return port locations (upper top & passenger - side low).

When we say "complete", we mean complete. The Mid - M ount system comes with everything you need. All accessories are included; the water pump, A/C compressor, Alternator, and power steering pump with reservoir. All pulleys and the belt are supplied. Heater hose adapters, power steering to - 6AN hardline, and the alternator plug/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color gr aphical instructions walk you through every step of the installation.

FEATURES AND BENEFITS

• The Mid - Mount complete accessory system has all accessories pulled in tighter than other accessory drives for a wide range of fitments.
• Bracketless accessory mounting integrated with supplied front timing cover assembly means this kit will work on a ll block deck heights.
• Water pump inlet pipe mounts for either drivers - side or passenger - side lower radiator hose routing, timing cover also has mounting for driver or pass - side ignition timing pointers to accommodate all needs.
• Two return heater hose ports (upper center & pass - side low) with hose adapter/port plug included for a complete solution.
• Crankshaft belt pulley configured for 3 or 4 - bolt crank dampers, spacer PNs 97 - 446, 97 - 447, or 97 - 448 are available for purchase to adjust for different OE crank damper pulley flange depths
• Power steering may be deleted with a drive belt change, see installation instructions for the commonly available drive belt required
• A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed and the power steering pump will need relocation, use kit 97 - 436, a remote mounted P/S reservoir is also required
• C7 LT1 style premium alternator, 150 amp
• C7 LT1 style water pump design
• Compact SD7 A/C compressor
• Type II power steering pump with baffled reservoir
• P/S adapter hardline to - 6 AN adapter included
• OE pulley ratios for optimal accessory performance