Go for a traditional look that still cooks with Architectural Bronze Powder Coat from Eastwood. Not all of our powder coating colors are just for cars; this powder has a beautiful bronze finish great for lawn furniture, architectural projects and custom applications. Use it to seal a new iron bench against impacts and UV rays or to restore vintage racing wheels for a classic high-speed aura. The powder easy to apply with our DIY powder coating guns and the excess can be reused on future projects.
When it comes to metal, Eastwood powders are far superior to liquid coatings. They provide an extremely durable finish that is chip-, chemical- and fuel-resistant. All powders are formulated of the highest quality materials and are durable enough for under hood applications with heat resistance up to 250 degrees Fahrenheit. They are suitable for any metal surface and usually cure at a temperature of 400 degrees Fahrenheit for 20 minutes after flow-out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
Do The Job Right with Eastwood architectural bronze powder coat that is an environmentally friendly option for metal finishing. We also offer a metallic bronze powder coat if you want even more of a shine. Call, email or visit our tech library for free expert advice on powder coating.Features:
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags
Color: Architectural Bronze
Gloss Level: Gloss
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Eastwood 100% satisfaction guarantee
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov