Hotcoat Powder Coat Black Chrome
- 90-Day Returns
- Technical Support
Create a custom black-chrome look over chromed and polished finishes. Do The Job Right with Eastwood Powders!
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
Works best over chrome and other buffed metal surfaces. Can also be used over (10285) Reflective Chrome.
Color: Transparent Black Chrome
Gloss Level: Gloss 80-90
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
1 Pound powders are packaged in plastic Bags
COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Application Note: Final appearance of Translucent and Candy powders will be affected by applied powder thickness, substrate and application techniques.
Questions & Answers