Hotcoat Powder Coat Black Texture
- 90-Day Returns
- Technical Support
Provides a custom matte black light textured finish. Do The Job Right with Eastwood Powders!
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
This textured polyester powder cures to a surface approximating 80 grit sand paper without the sharp peaks. Great for numerous muscle car and hot rod applications. Cure at 400 degrees F for 20 minutes after flow out occurs (transitions from a dry powder to a liquid look).
Color: Black Texture
Gloss Level: Matte
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Fine Texture
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
1 Pound powders are packaged in plastic Bags
COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Questions & Answers