Browse Subcategories:

Powder Coating

Eastwood Powder Coat Supplies

Powder coating gives you one of the most economical, color-durable, and longest-lasting finishes available... and the Eastwood HotCoat powder coating system makes it about as easy as it can get! DIY powder coating produces surfaces that are far more resistant to chipping, scratches and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available.
For the best combination of color, safety and affordability, use the Eastwood HotCoat powder coating system for your next DIY powder job. Powder coating allows you to apply thicker, more uniform finishes with less hazardous waste than liquid paints. It also produces more dynamic effects and takes less time to dry. Our selection of powder coat equipment has everything you need for a stunning outcome at a low price.

How to Powder Coat

Step One - Dirty Oily Valve Cover


• Degrease the cover with Simple Green® and an Eastwood Contour Gray Non-Woven Hand Pad (15178).

• Use a mini stainless steel brush to clean the inside corners and tight spots.

• Smooth pitted areas with Eastwood Contour 400 Grit Abrasive Paper (15169).

• Follow up with another Simple Green® and an Eastwood Contour Gray Non-Woven Hand Pad cleaning.

Clean Dirty Valve Cover

Step Two - Bake, Degrease and Clean


• Pre-bake the valve cover for 2 hours at 400ºF to burn off and outgas embedded contaminates in the cast aluminum surface. Our valve cover had years of use, which is why the 2-hour pre-bake was required.

• Cool the cover, and spray completely with Eastwood PRE Painting Prep (10041Z) to dissolve and wash away surface contaminates.

Clean with Eastwood Pre

Step Three - Beautiful Near-Chrome Finish


• Pre-heat the oven to 400ºF.

• Hang the cover and apply Eastwood Extreme Chrome Bonded Powder (15999). We used large paper clips to create hooks to hang the valve cover.

• Allow part to reach full temperature and bake 20 minutes (we baked ours for 45 minutes to ensure a full cure).

• Remove the cover and immediately hot-flock with Eastwood Rally Blue Translucent Powder (16051). Read more about hot-flocking here: garage.eastwood.com.

• Place the cover back in the heated oven and bake for 20 minutes or longer.

• Remove the part and cool.

Eastwood Extreme Chrome Powder

Step Four - Final Product After Coating With Rally Blue


• Use a fine, long file to remove the powder from the raised letters and rib details.

• Block sand raised surfaces with 320, then 800, grit abrasive paper.

• Clean off the dust and you’re done!

Eastwood Rally Blue Powder

Set Ascending Direction

1-40 of 171

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Eastwood Powder Coating & Paint Polish

    Eastwood Powder Coating & Paint Polish

    Eastwood Powder Coating & Paint Polish

    Special Price $12.97

    Regular Price: $19.99

    Save: $7.02

    Eastwood Powder Coating & Paint Polish

    Special Price $12.97

    Regular Price: $19.99

    Save: $7.02

  • Hotcoat Powder Pastel Blue

    Hotcoat Powder Coat Pastel Blue

    This powder provides a high gloss cool pastel blue finish.

    Starting at: $8.99

    This powder provides a high gloss cool pastel blue finish.

    Starting at: $8.99

  • Hotcoat Powder Blue Gray

    Hotcoat Powder Coat Blue Gray

    Blue Gray provides a high gloss dark gray/blue finish.

    Starting at: $8.99

    Blue Gray provides a high gloss dark gray/blue finish.

    Starting at: $8.99

  • Hotcoat Powder Blasted Steel

    Hotcoat Powder Coat Blasted Steel

    Medium silver wrinkle color look of abrasive-blasted steel.

    Starting at: $6.98

    Medium silver wrinkle color look of abrasive-blasted steel.

    Starting at: $6.98

  • Hotcoat Powder Beige

    Hotcoat Powder Coat Beige

    Our Beige powder looks great with its 85+% gloss level.

    Starting at: $8.99

    Our Beige powder looks great with its 85+% gloss level.

    Starting at: $8.99

  • Hotcoat Powder Sea Blue

    Hotcoat Powder Coat Sea Blue

    Sea Blue gives a 90+% gloss finish that really pops in the sunlight.

    Starting at: $9.99

    Sea Blue gives a 90+% gloss finish that really pops in the sunlight.

    Starting at: $9.99

  • Hotcoat Powder Periwinkle Gray

    Hotcoat Powder Coat Periwinkle Gray

    Periwinkle Gray provides a glossy finish that looks great with its hint of blue.

    Starting at: $8.99

    Periwinkle Gray provides a glossy finish that looks great with its hint of blue.

    Starting at: $8.99

  • Hotcoat Powder Turquoise Blue

    Hotcoat Powder Coat Turquoise Blue

    Provides a high gloss custom turquoise blue finish.

    Starting at: $8.99

    Provides a high gloss custom turquoise blue finish.

    Starting at: $8.99

  • Hotcoat Powder Light Violet

    Hotcoat Powder Coat Light Violet

    Light Violet provides an extremely durable high gloss finish.

    Starting at: $9.99

    Light Violet provides an extremely durable high gloss finish.

    Starting at: $9.99

  • HotCoat Powder Copper Metallic

    HotCoat Powder Coat Copper Metallic

    Provides a custom 40-60% semi-gloss metallic copper finish.

    Starting at: $18.99

    Provides a custom 40-60% semi-gloss metallic copper finish.

    Starting at: $18.99

  • HotCoat Powder Coat Translucent Mahogany

    HotCoat Powder Coat Translucent Mahogany

    Create a custom look with this glossy translucent Mahogany powder

    Starting at: $12.99

    Create a custom look with this glossy translucent Mahogany powder

    Starting at: $12.99

  • Hotcoat Powder Bird Yellow

    Hotcoat Powder Coat Bird Yellow

    Bird Yellow gives a high gloss, smooth finish that really pops.

    Starting at: $10.99

    Bird Yellow gives a high gloss, smooth finish that really pops.

    Starting at: $10.99

  • HotCoat Powder Brown Metallic

    HotCoat Powder Coat Brown Metallic

    Metallic Brown gives a custom 45-50% gloss finish.

    Starting at: $18.99

    Metallic Brown gives a custom 45-50% gloss finish.

    Starting at: $18.99

  • Hotcoat Powder Dark Gray

    Hotcoat Powder Coat Dark Gray

    Provides a glossy, deep dark gray finish.

    Starting at: $8.99

    Provides a glossy, deep dark gray finish.

    Starting at: $8.99

  • Hotcoat Powder Stamped Steel

    Hotcoat Powder Coat Stamped Steel

    Provides a low gloss stamped steel bare metal appearance.

    Starting at: $11.78

    Provides a low gloss stamped steel bare metal appearance.

    Starting at: $11.78

  • Hotcoat Powder Aqua Blue

    Hotcoat Powder Coat Aqua Blue

    Aqua Blue provides a smooth high gloss finish.

    Starting at: $8.99

    Aqua Blue provides a smooth high gloss finish.

    Starting at: $8.99

  • Hotcoat Powder V-Twin Orange

    Hotcoat Powder Coat V-Twin Orange

    V-Twin Orange provides a glossy orange finish similar Harley Davidson's.

    Starting at: $16.99

    V-Twin Orange provides a glossy orange finish similar Harley Davidson's.

    Starting at: $16.99

  • Hotcoat Powder Coat Atomic Yellow

    Hotcoat Powder Coat Atomic Yellow

    Intense translucent yellow powder that looks great over white bases or chrome

    Starting at: $13.99

    Intense translucent yellow powder that looks great over white bases or chrome

    Starting at: $13.99

  • Hotcoat Powder Gray

    Hotcoat Powder Coat Gray

    This Gray powder provides a smooth high gloss finish that looks great.

    Starting at: $8.99

    This Gray powder provides a smooth high gloss finish that looks great.

    Starting at: $8.99

  • Hotcoat Powder Mirror Green

    Hotcoat Powder Coat Mirror Green

    Create a super wet-looking green finish with this 95% gloss powder.

    Starting at: $9.99

    Create a super wet-looking green finish with this 95% gloss powder.

    Starting at: $9.99

  • Hotcoat Orange Yellow Powder

    Hotcoat Powder Coat Orange Yellow

    Orange Yellow powder provides a glossy finish similar to safety yellow.

    Starting at: $11.99

    Orange Yellow powder provides a glossy finish similar to safety yellow.

    Starting at: $11.99

  • Hotcoat Powder Translucent Green

    Hotcoat Powder Coat Translucent Green

    Gives a glossy candy green finish best applied over chromed, polished or chrome powdered parts.

    Starting at: $11.99

    Gives a glossy candy green finish best applied over chromed, polished or chrome powdered parts.

    Starting at: $11.99

  • Hotcoat Powder Candy Orange

    Hotcoat Powder Coat Candy Orange

    Candy Orange gives a rich orange/copper look over polished metal or chrome powder coat.

    Starting at: $14.99

    Candy Orange gives a rich orange/copper look over polished metal or chrome powder coat.

    Starting at: $14.99

  • Hotcoat Powder Rat Rod Rust

    HotCoat Powder Coat Rat Rod Rust

    Rat Rod Rust provides a custom matte rust-look finish.

    Starting at: $15.99

    Rat Rod Rust provides a custom matte rust-look finish.

    Starting at: $15.99

  • HotCoat Powder Mocha Metallic

    HotCoat Powder Coat Mocha Metallic

    Mocha Metallic provides a custom 65-70% gloss brown/bronze finish.

    Starting at: $18.99

    Mocha Metallic provides a custom 65-70% gloss brown/bronze finish.

    Starting at: $18.99

  • Hotcoat Powder Squirrel Gray

    Hotcoat Powder Coat Squirrel Gray

    Squirrel Gray provides a warm, high gloss finish.

    Starting at: $8.99

    Squirrel Gray provides a warm, high gloss finish.

    Starting at: $8.99

  • Hotcoat Powder Black Primer

    Hotcoat Powder Coat Black Primer

    Enhance the durability of powder-coated finishes with this epoxy-based powder.

    Starting at: $12.99

    Enhance the durability of powder-coated finishes with this epoxy-based powder.

    Starting at: $12.99

  • Hotcoat Powder Candy Raspberry

    Hotcoat Powder Coat Candy Raspberry

    Create a glossy candy raspberry finish over chromed, polished or chrome powdered parts.

    Starting at: $12.99

    Create a glossy candy raspberry finish over chromed, polished or chrome powdered parts.

    Starting at: $12.99

  • Hotcoat Powder Tractor Green

    Hotcoat Powder Coat Tractor Green

    Tractor Green provides a glossy finish that looks great when paired with yellow on lawn equipment.

    Starting at: $10.99

    Tractor Green provides a glossy finish that looks great when paired with yellow on lawn equipment.

    Starting at: $10.99

  • Hotcoat Powder Chrysler Orange

    Hotcoat Powder Coat Chrysler Orange

    This glossy orange powder replicates the color found on many Chrysler vehicles.

    Starting at: $23.99

    This glossy orange powder replicates the color found on many Chrysler vehicles.

    Starting at: $23.99

  • Hotcoat Powder Olive Drab Green

    Hotcoat Powder Coat Olive Drab Green

    Provides a smooth olive drab finish great for military-look or custom projects.

    Starting at: $11.99

    Provides a smooth olive drab finish great for military-look or custom projects.

    Starting at: $11.99

  • Hotcoat Powder Off White

    Hotcoat Powder Coat Off White

    Off white provides a white ceramic-looking finish.

    Starting at: $9.99

    Off white provides a white ceramic-looking finish.

    Starting at: $9.99

  • Hotcoat Powder Cream

    Hotcoat Powder Coat Cream

    Cream powder provides a soft glossy finish.

    Starting at: $9.99

    Cream powder provides a soft glossy finish.

    Starting at: $9.99

  • Hotcoat Powder Rally Wheel Charcoal

    Hotcoat Powder Coat Rally Wheel Charcoal

    Charcoal gray finish commonly used when refinishing Rally wheels or when you need a nice charcoal color.

    Starting at: $23.99

    Charcoal gray finish commonly used when refinishing Rally wheels or when you need a nice charcoal color.

    Starting at: $23.99

  • Hotcoat Powder Ruby Red

    Hotcoat Powder Coat Ruby Red

    Provides a deep 80%+ gloss Ruby Red finish.

    Starting at: $10.99

    Provides a deep 80%+ gloss Ruby Red finish.

    Starting at: $10.99

  • Hotcoat Powder Navy Blue

    Hotcoat Powder Coat Navy

    Navy Blue provides a deep glossy finish.

    Starting at: $10.99

    Navy Blue provides a deep glossy finish.

    Starting at: $10.99

  • HotCoat Powder Silver Lining Metallic

    HotCoat Powder Coat Silver Lining Metallic

    Silver Lining Metallic gives a cool 70% gloss finish that looks great alone or try it under a translucent.

    Starting at: $22.99

    Silver Lining Metallic gives a cool 70% gloss finish that looks great alone or try it under a translucent.

    Starting at: $22.99

  • Hotcoat Powder Semi-Gloss Clear

    Hotcoat Powder Coat Semi-Gloss Clear

    Semi-gloss clear produces a low-medium gloss clear finish.

    Starting at: $11.99

    Semi-gloss clear produces a low-medium gloss clear finish.

    Starting at: $11.99

  • Hotcoat Powder Bronze Metallic

    Hotcoat Powder Coat Bronze Metallic

    Bronze Metallic offers a cool matte finish.

    Starting at: $14.99

    Bronze Metallic offers a cool matte finish.

    Starting at: $14.99

  • Hotcoat Powder Sour Apple Translucent Green

    Hotcoat Powder Coat Sour Apple Translucent Green

    Stand out with this glossy candy Sour Apple powder.

    Starting at: $12.99

    Stand out with this glossy candy Sour Apple powder.

    Starting at: $12.99

Set Ascending Direction

1-40 of 171

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5




Powder Coating Guns

Choosing the right powder coat gun is the first step to success. The Original DIY Powder Coat Gun System is an excellent all-around solution, and  the Dual-Voltage Powder Coat Gun has two different settings for more precise use. Powder coating starter kits include a gun and various accessories for those new to the technique. You can save by ordering a powder gun with a curing oven or compressor.


Vibrant Powder Colors

How do you want your vehicle to look? Whether you have spent hours upon hours dreaming about a color,  or if you are  open for ideas, Eastwood has nearly 100 different HotCoat powder colors to help bring your vision to life. These finishes can be applied within an hour and won't chip or fade over time. In addition to a variety of lights and darks, we make powders with flat, gloss, metallic, and textured effects.


Prep & Accessories

Make sure you have everything you need to get your surface ready and apply a dazzling finish. Use Eastwood powder coating strippers and cleaners to remove old paint, powder, wax and grease that can hinder your work. If there are blemishes or irregularities, high-temperature lab metal is the perfect solution for permanent repairs. Accessories such as masking tapes, storage bottles, powder coating polish and beginner's handbooks will get you up to speed.


Curing Equipment

A key part of doing the job right with powder coating: High heat is needed to properly cure your work. Use a powder coating curing oven for small projects or aim an infrared curing lamp at larger parts and housings. We carry light stands for holding and directing your lamps and non-contact thermometers to know when items are safe to handle.


The Eastwood Guarantee

All Eastwood HotCoat powder coating equipment has a 100 percent customer satisfaction guarantee. We also have some of the longest warranties in the business on our award-winning parts and accessories.


For decades, we've helped do-it-yourselfers improve their restoration projects with more than 4,000 unique products. Let us help you do the job right.

 

Sponsored Links: