Browse Subcategories:

Powder Coating

Eastwood Powder Coat Supplies

Powder coating gives you one of the most economical, color-durable, and longest-lasting finishes available... and the Eastwood HotCoat powder coating system makes it about as easy as it can get! DIY powder coating produces surfaces that are far more resistant to chipping, scratches and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available.
For the best combination of color, safety and affordability, use the Eastwood HotCoat powder coating system for your next DIY powder job. Powder coating allows you to apply thicker, more uniform finishes with less hazardous waste than liquid paints. It also produces more dynamic effects and takes less time to dry. Our selection of powder coat equipment has everything you need for a stunning outcome at a low price.

Set Descending Direction

16 Item(s)

  • Hotcoat Powder Metallic Red

    HotCoat Powder Coat Metallic Red

    This powder produces a deep Medium Red high gloss finish with fine metallic sparkle flakes.

    Starting at: $19.99

    This powder produces a deep Medium Red high gloss finish with fine metallic sparkle flakes.

    Starting at: $19.99

  • Hotcoat Powder Metallic Blue

    Hotcoat Powder Coat Metallic Blue

    Medium Blue high gloss finish with fine metallic sparkle flakes

    Starting at: $19.99

    Medium Blue high gloss finish with fine metallic sparkle flakes

    Starting at: $19.99

  • Hotcoat Powder Metallic Purple

    Hotcoat Powder Coat Metallic Purple

    A deep medium Purple high gloss finish with fine metallic sparkle flakes.

    Starting at: $15.99

    A deep medium Purple high gloss finish with fine metallic sparkle flakes.

    Starting at: $15.99

  • Hotcoat Powder Gold

    Hotcoat Powder Coat Gold

    This gold powder produces an opaque metallic gold finish.

    Starting at: $12.99

    This gold powder produces an opaque metallic gold finish.

    Starting at: $12.99

  • Hotcoat Powder OEM Wheel Sparkle Silver

    Hotcoat Powder Coat OEM Wheel Sparkle Silver

    Replicate the sparkle silver finish found on many OEM vehicle wheels or use for custom applications.

    Starting at: $23.99

    Replicate the sparkle silver finish found on many OEM vehicle wheels or use for custom applications.

    Starting at: $23.99

  • Hotcoat Powder Cast Aluminum

    Hotcoat Powder Coat Cast Aluminum

    Provides a 70-80% gloss cast aluminum look.

    Starting at: $15.99

    Provides a 70-80% gloss cast aluminum look.

    Starting at: $15.99

  • Hotcoat Powder Metallic Clear

    Hotcoat Powder Coat Metallic Clear

    Produces a deep high gloss finish with special fine metallic sparkle flakes.

    Starting at: $18.99

    Produces a deep high gloss finish with special fine metallic sparkle flakes.

    Starting at: $18.99

  • HotCoat Powder Black Diamond Metallic

    HotCoat Powder Coat Black Diamond Metallic

    Black Diamond Metallic powder provides a glossy finish with fine metallic particles.

    Starting at: $16.99

    Black Diamond Metallic powder provides a glossy finish with fine metallic particles.

    Starting at: $16.99

  • Hotcoat Powder Black Stardust

    Hotcoat Powder Coat Black Stardust

    Black isn't black with this custom powder featuring sparkling flakes.

    Starting at: $27.99

    Black isn't black with this custom powder featuring sparkling flakes.

    Starting at: $27.99

  • Hotcoat Powder Bronze Metallic

    Hotcoat Powder Coat Bronze Metallic

    Bronze Metallic offers a cool matte finish.

    Starting at: $14.99

    Bronze Metallic offers a cool matte finish.

    Starting at: $14.99

  • HotCoat Powder Silver Lining Metallic

    HotCoat Powder Coat Silver Lining Metallic

    Silver Lining Metallic gives a cool 70% gloss finish that looks great alone or try it under a translucent.

    Starting at: $22.99

    Silver Lining Metallic gives a cool 70% gloss finish that looks great alone or try it under a translucent.

    Starting at: $22.99

  • Hotcoat Powder Rally Wheel Charcoal

    Hotcoat Powder Coat Rally Wheel Charcoal

    Charcoal gray finish commonly used when refinishing Rally wheels or when you need a nice charcoal color.

    Starting at: $23.99

    Charcoal gray finish commonly used when refinishing Rally wheels or when you need a nice charcoal color.

    Starting at: $23.99

  • HotCoat Powder Mocha Metallic

    HotCoat Powder Coat Mocha Metallic

    Mocha Metallic provides a custom 65-70% gloss brown/bronze finish.

    Starting at: $18.99

    Mocha Metallic provides a custom 65-70% gloss brown/bronze finish.

    Starting at: $18.99

  • Hotcoat Powder Stamped Steel

    Hotcoat Powder Coat Stamped Steel

    Provides a low gloss stamped steel bare metal appearance.

    Starting at: $11.78

    Provides a low gloss stamped steel bare metal appearance.

    Starting at: $11.78

  • HotCoat Powder Brown Metallic

    HotCoat Powder Coat Brown Metallic

    Metallic Brown gives a custom 45-50% gloss finish.

    Starting at: $18.99

    Metallic Brown gives a custom 45-50% gloss finish.

    Starting at: $18.99

  • HotCoat Powder Copper Metallic

    HotCoat Powder Coat Copper Metallic

    Provides a custom 40-60% semi-gloss metallic copper finish.

    Starting at: $18.99

    Provides a custom 40-60% semi-gloss metallic copper finish.

    Starting at: $18.99

Set Descending Direction

16 Item(s)





How to Powder Coat

Step One - Dirty Oily Valve Cover


• Degrease the cover with Simple Green® and an Eastwood Contour Gray Non-Woven Hand Pad (15178).

• Use a mini stainless steel brush to clean the inside corners and tight spots.

• Smooth pitted areas with Eastwood Contour 400 Grit Abrasive Paper (15169).

• Follow up with another Simple Green® and an Eastwood Contour Gray Non-Woven Hand Pad cleaning.

Clean Dirty Valve Cover

Step Two - Bake, Degrease and Clean


• Pre-bake the valve cover for 2 hours at 400ºF to burn off and outgas embedded contaminates in the cast aluminum surface. Our valve cover had years of use, which is why the 2-hour pre-bake was required.

• Cool the cover, and spray completely with Eastwood PRE Painting Prep (10041Z) to dissolve and wash away surface contaminates.

Clean with Eastwood Pre

Step Three - Beautiful Near-Chrome Finish


• Pre-heat the oven to 400ºF.

• Hang the cover and apply Eastwood Extreme Chrome Bonded Powder (15999). We used large paper clips to create hooks to hang the valve cover.

• Allow part to reach full temperature and bake 20 minutes (we baked ours for 45 minutes to ensure a full cure).

• Remove the cover and immediately hot-flock with Eastwood Rally Blue Translucent Powder (16051). Read more about hot-flocking here: garage.eastwood.com.

• Place the cover back in the heated oven and bake for 20 minutes or longer.

• Remove the part and cool.

Eastwood Extreme Chrome Powder

Step Four - Final Product After Coating With Rally Blue


• Use a fine, long file to remove the powder from the raised letters and rib details.

• Block sand raised surfaces with 320, then 800, grit abrasive paper.

• Clean off the dust and you’re done!

Eastwood Rally Blue Powder

Powder Coating Guns

Choosing the right powder coat gun is the first step to success. The Original DIY Powder Coat Gun System is an excellent all-around solution, and  the Dual-Voltage Powder Coat Gun has two different settings for more precise use. Powder coating starter kits include a gun and various accessories for those new to the technique. You can save by ordering a powder gun with a curing oven or compressor.


Vibrant Powder Colors

How do you want your vehicle to look? Whether you have spent hours upon hours dreaming about a color,  or if you are  open for ideas, Eastwood has nearly 100 different HotCoat powder colors to help bring your vision to life. These finishes can be applied within an hour and won't chip or fade over time. In addition to a variety of lights and darks, we make powders with flat, gloss, metallic, and textured effects.


Prep & Accessories

Make sure you have everything you need to get your surface ready and apply a dazzling finish. Use Eastwood powder coating strippers and cleaners to remove old paint, powder, wax and grease that can hinder your work. If there are blemishes or irregularities, high-temperature lab metal is the perfect solution for permanent repairs. Accessories such as masking tapes, storage bottles, powder coating polish and beginner's handbooks will get you up to speed.


Curing Equipment

A key part of doing the job right with powder coating: High heat is needed to properly cure your work. Use a powder coating curing oven for small projects or aim an infrared curing lamp at larger parts and housings. We carry light stands for holding and directing your lamps and non-contact thermometers to know when items are safe to handle.


The Eastwood Guarantee

All Eastwood HotCoat powder coating equipment has a 100 percent customer satisfaction guarantee. We also have some of the longest warranties in the business on our award-winning parts and accessories.


For decades, we've helped do-it-yourselfers improve their restoration projects with more than 4,000 unique products. Let us help you do the job right.

 

Sponsored Links: