Browse Subcategories:

Powder Coating

Eastwood Powder Coat Supplies

Powder coating gives you one of the most economical, color-durable, and longest-lasting finishes available... and the Eastwood HotCoat powder coating system makes it about as easy as it can get! DIY powder coating produces surfaces that are far more resistant to chipping, scratches and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available.
For the best combination of color, safety and affordability, use the Eastwood HotCoat powder coating system for your next DIY powder job. Powder coating allows you to apply thicker, more uniform finishes with less hazardous waste than liquid paints. It also produces more dynamic effects and takes less time to dry. Our selection of powder coat equipment has everything you need for a stunning outcome at a low price.

How to Powder Coat

Step One - Dirty Oily Valve Cover


• Degrease the cover with Simple Green® and an Eastwood Contour Gray Non-Woven Hand Pad (15178).

• Use a mini stainless steel brush to clean the inside corners and tight spots.

• Smooth pitted areas with Eastwood Contour 400 Grit Abrasive Paper (15169).

• Follow up with another Simple Green® and an Eastwood Contour Gray Non-Woven Hand Pad cleaning.

Clean Dirty Valve Cover

Step Two - Bake, Degrease and Clean


• Pre-bake the valve cover for 2 hours at 400ºF to burn off and outgas embedded contaminates in the cast aluminum surface. Our valve cover had years of use, which is why the 2-hour pre-bake was required.

• Cool the cover, and spray completely with Eastwood PRE Painting Prep (10041Z) to dissolve and wash away surface contaminates.

Clean with Eastwood Pre

Step Three - Beautiful Near-Chrome Finish


• Pre-heat the oven to 400ºF.

• Hang the cover and apply Eastwood Extreme Chrome Bonded Powder (15999). We used large paper clips to create hooks to hang the valve cover.

• Allow part to reach full temperature and bake 20 minutes (we baked ours for 45 minutes to ensure a full cure).

• Remove the cover and immediately hot-flock with Eastwood Rally Blue Translucent Powder (16051). Read more about hot-flocking here: garage.eastwood.com.

• Place the cover back in the heated oven and bake for 20 minutes or longer.

• Remove the part and cool.

Eastwood Extreme Chrome Powder

Step Four - Final Product After Coating With Rally Blue


• Use a fine, long file to remove the powder from the raised letters and rib details.

• Block sand raised surfaces with 320, then 800, grit abrasive paper.

• Clean off the dust and you’re done!

Eastwood Rally Blue Powder

Set Descending Direction

81-120 of 171

  • Lab-Metal 24 oz

    Lab-Metal 24 oz

    Metal repair putty, dent filler and patching compound... ready-to-use
    $33.99
    Metal repair putty, dent filler and patching compound... ready-to-use
    $33.99
  • Hotcoat High Temperature Polyester Masking Tape

    Hotcoat High Temperature Polyester Masking Tape

    Perfect for general powder coating applications

    Starting at: $6.99

    Perfect for general powder coating applications

    Starting at: $6.99

  • Hotcoat High Temperature Fiberglass Masking Tape

    Hotcoat High Temperature Fiberglass Masking Tape

    Perfect for two tone applications

    Starting at: $18.99

    Perfect for two tone applications

    Starting at: $18.99

  • Eastwood Beginner's Powder Coating Handbook

    Eastwood Beginner's Powder Coating Handbook

    Covers everything from getting started, to common problems and solutions, and advanced techniques

    Special Price $13.97

    Regular Price: $19.99

    Save: $6.02

    Covers everything from getting started, to common problems and solutions, and advanced techniques

    Special Price $13.97

    Regular Price: $19.99

    Save: $6.02

  • Eastwood Painting and Blasting Turntable

    Eastwood Painting and Blasting Turntable

    Makes Blasting and painting large objects easier

    Special Price $35.97

    Regular Price: $45.99

    Save: $10.02

    Makes Blasting and painting large objects easier

    Special Price $35.97

    Regular Price: $45.99

    Save: $10.02

  • 5 Lb Powder storage bottle with Lid

    5 Lb Powder storage bottle with Lid

    5 Lb. Powder storage bottle with Lid
    $5.99
    5 Lb. Powder storage bottle with Lid
    $5.99
  • 2 Lb Powder storage bottle with Lid

    2 Lb Powder storage bottle with Lid

    2 Lb. Powder storage bottle with Lid
    $3.99
    2 Lb. Powder storage bottle with Lid
    $3.99
  • Replacement Element for 10590

    Replacement Element for 10590

    Replacement Element for 10590
    $74.99
    Replacement Element for 10590
    $74.99
  • Eastwood Non-Contact Infrared Thermometer

    Eastwood Non-Contact Infrared Thermometer

    Eastwood Non-Contact Infrared Thermometer
    $35.99

    Out of stock

    Eastwood Non-Contact Infrared Thermometer
    $35.99

    Out of stock

  • EW Paint and Powder Coating Stand

    Eastwood Paint and Powder Coating Stand

    Ensure complete paint or powder coat coverage

    Special Price $40.97

    Regular Price: $47.99

    Save: $7.02

    Ensure complete paint or powder coat coverage

    Special Price $40.97

    Regular Price: $47.99

    Save: $7.02

  • High Temp Silicone Plugs 10/pack

    High Temp Silicone Plugs 10/pack

    Powder-coating? Plug bolt holes and support pieces while they oven-cure

    Starting at: $8.99

    Powder-coating? Plug bolt holes and support pieces while they oven-cure

    Starting at: $8.99

  • High Temp Silicone Caps 10/pack

    High Temp Silicone Caps 10/pack

    Protect threaded studs from powder build-up

    Starting at: $6.99

    Protect threaded studs from powder build-up

    Starting at: $6.99

  • ATD Tools Laser Infrared Thermometer 70001

    ATD Tools Laser Infrared Thermometer 70001

    ATD Laser Infrared Thermometer 70001
    $52.99
    ATD Laser Infrared Thermometer 70001
    $52.99
  • Magnetic disc .75 in and 1 in

    Magnetic disc .75 in and 1 in

    Magnetic disc. .75 in and 1 in

    Special Price $0.68

    Regular Price: $3.99

    Save: $3.31

    Magnetic disc. .75 in and 1 in

    Special Price $0.68

    Regular Price: $3.99

    Save: $3.31

  • Hotcoat 20 Pak 6in hooks

    Hotcoat 20 Pak 6in hooks

    Uncoated metal hooks suspend parts for powder coating and curing
    $10.99
    Uncoated metal hooks suspend parts for powder coating and curing
    $10.99
  • 1st Stage Prefilter/Internal Frame20x20x1

    1st Stage Prefilter/Internal Frame20x20x1

    Replacement pre-filter for powder-coating and liquid-coating booths
    $9.99
    Replacement pre-filter for powder-coating and liquid-coating booths
    $9.99
  • 2 Pocket Panel 2nd Stage Filter20x20x15

    2 Pocket Panel 2nd Stage Filter20x20x15

    Replacement pocket filter for our booths that use pocket filters
    $38.99
    Replacement pocket filter for our booths that use pocket filters
    $38.99
  • Hi-Temp Lab Metal 24 oz

    Hi-Temp Lab Metal 24 oz

    Make permanent, rustproof, metal repairs...no mixing or measuring
    $60.99
    Make permanent, rustproof, metal repairs...no mixing or measuring
    $60.99
  • Silicone Pull Plug KIT .062in-.809in O.D.125 pc

    Silicone Pull Plug KIT .062in-.809in O.D.125 pc

    Prevent powder build-up in critical tolerance areas
    $48.99
    Prevent powder build-up in critical tolerance areas
    $48.99
  • Hotcoat Powder Coat Atomic Pink

    Hotcoat Powder Coat Atomic Pink

    Transparent Atomic Pink looks great over chrome and is intense over bright white

    Starting at: $17.99

    Transparent Atomic Pink looks great over chrome and is intense over bright white

    Starting at: $17.99

  • Silicone Cap Kit .070in-.250inI.D. SC-1 125 Pcs

    Silicone Cap Kit .070in-.250inI.D. SC-1 125 Pcs

    Prevent powder build-up in critical tolerance areas
    $49.99
    Prevent powder build-up in critical tolerance areas
    $49.99
  • Eastwood Hi Temp Silicone Plugs Assortment Of 30

    Eastwood Hi Temp Silicone Plugs Assortment Of 30

    Powder-coating? Plug bolt holes and support pieces while they oven-cure

    Special Price $10.87

    Regular Price: $23.99

    Save: $13.12

    Powder-coating? Plug bolt holes and support pieces while they oven-cure

    Special Price $10.87

    Regular Price: $23.99

    Save: $13.12

  • Fiberglass Final Filter 20x20x2 8% EFFICIENT

    Fiberglass Final Filter 20x20x2 8% EFFICIENT

    Keep the air clear as you work with our benchtop powder-coat booths
    $5.99
    Keep the air clear as you work with our benchtop powder-coat booths
    $5.99
  • Hotcoat Powder Cast Aluminum

    Hotcoat Powder Coat Cast Aluminum

    Provides a 70-80% gloss cast aluminum look.

    Starting at: $15.99

    Provides a 70-80% gloss cast aluminum look.

    Starting at: $15.99

  • HotCoat Powder Kawasaki Green

    HotCoat Powder Coat Kawasaki Green

    Provide a custom look or match up your dirt bike with this Bright Green glossy finish.

    Starting at: $18.99

    Provide a custom look or match up your dirt bike with this Bright Green glossy finish.

    Starting at: $18.99

  • Hotcoat Powder Silver Vein

    Hotcoat Powder Coat Silver Vein

    Provides a silver vein appearance great for custom parts, furniture and architectural uses.

    Starting at: $10.99

    Provides a silver vein appearance great for custom parts, furniture and architectural uses.

    Starting at: $10.99

  • Hotcoat Powder Silver Base

    Hotcoat Powder Coat Silver Base

    Create a custom look under translucent colors with this silver base.

    Starting at: $11.99

    Create a custom look under translucent colors with this silver base.

    Starting at: $11.99

  • Hotcoat Powder Lo-Temp Topcoat

    Hotcoat Powder Coat Ultra Gloss Clear Lo-Temp Topcoat

    Provides a deep great-looking 90-95% gloss.

    Starting at: $12.99

    Provides a deep great-looking 90-95% gloss.

    Starting at: $12.99

  • Hotcoat Powder Coat Atomic Red

    Hotcoat Powder Coat Atomic Red

    Super gloss candy red powder looks great over chromed or bright white bases

    Starting at: $16.99

    Super gloss candy red powder looks great over chromed or bright white bases

    Starting at: $16.99

  • Hotcoat Powder Metallic Clear

    Hotcoat Powder Coat Metallic Clear

    Produces a deep high gloss finish with special fine metallic sparkle flakes.

    Starting at: $18.99

    Produces a deep high gloss finish with special fine metallic sparkle flakes.

    Starting at: $18.99

  • Hotcoat Powder Rally Wheel Silver

    Hotcoat Powder Coat Rally Wheel Silver

    Silver finish commonly used when refinishing Rally wheels.

    Starting at: $12.99

    Silver finish commonly used when refinishing Rally wheels.

    Starting at: $12.99

  • Hotcoat Powder Coat Cosmic Clear

    Hotcoat Powder Coat Cosmic Clear

    High gloss clear powder with a metallic flake

    Starting at: $12.99

    High gloss clear powder with a metallic flake

    Starting at: $12.99

  • Hotcoat Powder Satin Clear

    Hotcoat Powder Coat Satin Clear

    Satin clear produces a custom low gloss finish.

    Starting at: $11.99

    Satin clear produces a custom low gloss finish.

    Starting at: $11.99

  • Hotcoat Powder Smoke Chrome

    Hotcoat Powder Coat Chrome Smoke

    Provides a deep chrome smoke base to be used under clear or translucent powders.

    Starting at: $14.99

    Provides a deep chrome smoke base to be used under clear or translucent powders.

    Starting at: $14.99

  • 10159 Translucent Violet

    Hotcoat Powder Coat Translucent Violet

    Create a custom candy violet finish over polished metals or chrome powders.

    Starting at: $15.99

    Create a custom candy violet finish over polished metals or chrome powders.

    Starting at: $15.99

  • HotCoat Powder Black Diamond Metallic

    HotCoat Powder Coat Black Diamond Metallic

    Black Diamond Metallic powder provides a glossy finish with fine metallic particles.

    Starting at: $16.99

    Black Diamond Metallic powder provides a glossy finish with fine metallic particles.

    Starting at: $16.99

  • Hotcoat Powder Black Stardust

    Hotcoat Powder Coat Black Stardust

    Black isn't black with this custom powder featuring sparkling flakes.

    Starting at: $27.99

    Black isn't black with this custom powder featuring sparkling flakes.

    Starting at: $27.99

  • Hotcoat Powder Appliance White

    Hotcoat Powder Coat Appliance White

    Appliance White provides a glossy finish similar to what is on most home appliances.

    Starting at: $9.99

    Appliance White provides a glossy finish similar to what is on most home appliances.

    Starting at: $9.99

  • Eastwood Translucent Teal Powder

    Hotcoat Powder Coat Translucent Teal

    Gives a glossy candy teal finish

    Starting at: $13.99

    Gives a glossy candy teal finish

    Starting at: $13.99

  • Hotcoat Powder Cadillac Blue

    Hotcoat Powder Coat Cadillac Blue

    This glossy blue looks great on parts found on Cadillacs or if you're just looking for a cool color.

    Starting at: $9.99

    This glossy blue looks great on parts found on Cadillacs or if you're just looking for a cool color.

    Starting at: $9.99

Set Descending Direction

81-120 of 171





Powder Coating Guns

Choosing the right powder coat gun is the first step to success. The Original DIY Powder Coat Gun System is an excellent all-around solution, and  the Dual-Voltage Powder Coat Gun has two different settings for more precise use. Powder coating starter kits include a gun and various accessories for those new to the technique. You can save by ordering a powder gun with a curing oven or compressor.


Vibrant Powder Colors

How do you want your vehicle to look? Whether you have spent hours upon hours dreaming about a color,  or if you are  open for ideas, Eastwood has nearly 100 different HotCoat powder colors to help bring your vision to life. These finishes can be applied within an hour and won't chip or fade over time. In addition to a variety of lights and darks, we make powders with flat, gloss, metallic, and textured effects.


Prep & Accessories

Make sure you have everything you need to get your surface ready and apply a dazzling finish. Use Eastwood powder coating strippers and cleaners to remove old paint, powder, wax and grease that can hinder your work. If there are blemishes or irregularities, high-temperature lab metal is the perfect solution for permanent repairs. Accessories such as masking tapes, storage bottles, powder coating polish and beginner's handbooks will get you up to speed.


Curing Equipment

A key part of doing the job right with powder coating: High heat is needed to properly cure your work. Use a powder coating curing oven for small projects or aim an infrared curing lamp at larger parts and housings. We carry light stands for holding and directing your lamps and non-contact thermometers to know when items are safe to handle.


The Eastwood Guarantee

All Eastwood HotCoat powder coating equipment has a 100 percent customer satisfaction guarantee. We also have some of the longest warranties in the business on our award-winning parts and accessories.


For decades, we've helped do-it-yourselfers improve their restoration projects with more than 4,000 unique products. Let us help you do the job right.

 

Sponsored Links: