COVID-19 UPDATE: We’re shipping orders, prioritizing health & safety. Learn More

Prep/Stripping

Eastwood Powder Coating Prep

Automotive powder coating is the same as painting in one major way: you need a well-prepared surface in order for the result to come out the way you want. Dirty, greasy or scratched surfaces can reduce the adhesion and durability of your finish. Powder coating preparation supplies from Eastwood are an effective and affordable way to get your metal parts ready. We are the leader in DIY powder coating and will get your project off to the right start.

Set Descending Direction

6 Item(s)

  • Infrared Dual Lamp Powder Coating Cure System

    Infrared Dual Lamp Cure System

    Twin 10"x30" Infrared Lamps for curing big housings; includes stand
    $1,637.99
    Twin 10"x30" Infrared Lamps for curing big housings; includes stand
    $1,637.99
  • Eastwood Fast Etch

    Eastwood Fast Etch with pump 32 oz

    Dissolves rust, leaves a protective zinc-phosphate coating...in 1 step
    $24.99
    Dissolves rust, leaves a protective zinc-phosphate coating...in 1 step
    $24.99
  • Pre Painting Prep Aerosol

    Eastwood PRE Painting Prep

    Removes silicone, wax, polish, grease; promotes paint/powder adhesion

    Starting at: $6.97

    Removes silicone, wax, polish, grease; promotes paint/powder adhesion

    Starting at: $6.97

  • Hi-Temp Lab Metal 24 oz

    Hi-Temp Lab Metal 24 oz

    Make permanent, rustproof, metal repairs...no mixing or measuring
    $60.99
    Make permanent, rustproof, metal repairs...no mixing or measuring
    $60.99
  • Lab-Solvent 16 oz

    Lab-Solvent 16 oz

    Clean-up or smooth Lab-Metal to minimize sanding
    $15.99
    Clean-up or smooth Lab-Metal to minimize sanding
    $15.99
  • Lab-Metal 24 oz

    Lab-Metal 24 oz

    Metal repair putty, dent filler and patching compound... ready-to-use
    $33.99
    Metal repair putty, dent filler and patching compound... ready-to-use
    $33.99

Set Descending Direction

6 Item(s)

Cleaning Surfaces Before Powder Coating

The Eastwood PRE Painting Prep cleaning system that is so popular for painters works great for powder coaters as well. Use it to strip away old oil, grease, wax or polish and leave your surface ready for powder. If a part has small rust spots, our spray-on metal etcher will wipe them out and leave behind a zinc-phosphate coating to protect against further damage.

Metal Repair & Filler Supplies

For larger rust spots, holes, cracks, dents and other imperfections, you may need a quality filler compound. Alvin Lab-metal is a remarkable aluminum-reinforced putty that can be used to permanently repair these surface problems. Use a putty knife to apply it right from the can, then sand it down as needed for a smooth water-resistant finish. This high-temperature metal filler will thwart the heat of both the powder coating process and of vehicle operation.

Home Powder Coating Made Easy

The Eastwood HotCoat® powder coating system covers every step of this automotive finishing methods, and that includes having a good surface to work with. We are proud to carry everything you need for preparing metal and cleaning up so you can have a great looking machine. Everything is covered by our 100 percent customer satisfaction guarantee and professional tech support.





 

Sponsored Links: