Item # 10329 Topcoat BRAND: Eastwood

Hotcoat Powder Coat Ultra Gloss Clear Lo-Temp Topcoat

Provides a deep great-looking 90-95% gloss.
Provides a deep great-looking 90-95% gloss.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 12.19ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Grouped product items
Product Name Qty
Powder Ultra Clear Low Temp 8 Oz
$13.99
In Stock
Powder Ultraclear Low Temp Top Coat 1 Lb
$17.99
In Stock
Powder Ultra Clear Low Temp 25 Lb
$366.99
Out Of Stock. Due back October 2
Powder Ultra Clear Low Temp Topcoat 50 Lb
$699.99
Out Of Stock. Due back October 2

Starting at$13.99

Starting at$13.99

Save for Later
Save for Later
Provides a deep great-looking 90-95% gloss.
  • 90-Day Returns
  • Technical Support
Hotcoat Powder Coat Ultra Gloss Clear Lo-Temp Topcoat

Description

Provides a deep great-looking 90-95% gloss. Do The Job Right with Eastwood Powders!

  • Provides extremely durable finish
  • Contains no environmentally harmful solvents
  • 100% Virgin powder
  • Impact resistant and flexibility
  • Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.


Specifications

Color: Clear
Gloss Level: Gloss 90-95
Cure Temperature: 340 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Warranty

Eastwood 100% satisfaction guarantee

Contents

8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags

Application Tips

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Safety Information

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Customer Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 9.36ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

Can low temp clear be applied over automotive paint.

Asked by: ZeusWaywardson
If the curing temperature for this powder (340F) does not exceed the temperature the paint under can handle; you should be fine in most scenarios.
Answered by: Kelly H
Date published: 2021-05-21
  • y_2021, m_8, d_3, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_10329_bv32_Topcoat, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 36.76ms
  • QUESTIONS, PRODUCT
We found other products you might like!
Hotcoat Powder Coat Ultra Gloss Clear Lo-Temp Topcoat

Starting at$13.99