Home /
Hotcoat Powder Coat Chrome Smoke

Hotcoat Powder Coat Chrome Smoke

Item #10543 Smoke Chrome

Provides a deep chrome smoke base to be used under clear or translucent powders.

Powder New Smoke Chrome 8 Oz Item #10543 $14.99	- + Quantity: Quantity: In stock
Powder New Smoke Chrome 1Lb Item #10543LB $19.99	- + Quantity: Quantity: In stock
Powder New Smoke Chrome 25 Lb Item #1054325LBS $302.99	- + Quantity: Quantity: BACKORDER
Powder New Smoke Chrome 50 Lb Item #1054350LBS $579.99	- + Quantity: Quantity: BACKORDER

Total $0

Details

Provides a deep chrome smoke base to be used under clear or translucent powders. Do The Job Right with Eastwood Powders!

Provides extremely durable finish
Contains no environmentally harmful solvents
100% Virgin powder
Impact resistant and flexibility
Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Must be top coated with any clear or translucent for improved durability, UV and chemical resistance as well as increased gloss and depth.

8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags

Specifications

Color: Chrome Smoke
Gloss Level: Gloss 80-90%
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Epoxy Polyester Hybrid
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Warranty

Eastwood 100% satisfaction guarantee

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Application Note: Final appearance of Translucent and Candy powders will be affected by applied powder thickness, substrate and application techniques.

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov