Replicate the sparkle silver finish found on many OEM vehicle wheels or use for custom applications. Do The Job Right with Eastwood Powders!
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags
Color: Sparkle Silver
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Eastwood 100% satisfaction guarantee
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
You may also be interested in the following product(s)
Starting at: $15.99