• Home
  • Hotcoat Powder Coat Off White

Hotcoat Powder Coat Off White

Item #10135 Hotcoat Powder Off White

Extremely durable, chip-resistant finish; coat and cure in under an hour
  1. Powder Off White 8 Oz
    Item #10135
    Only $7.99

    In stock

  2. Powder Off White 1 Lb
    Item #10135LB
    Only $9.99

    In stock

  3. Powder Off White 25 Lb
    Item #1013525LBS
    Only $179.99

    Out of stock

  4. Powder Off White 50 Lb
    Item #1013550LBS
    Only $299.99

    Out of stock



Do The Job Right with Eastwood Powders!

  • Provides extremely durable finish
  • Contains no environmentally harmful solvents
  • 100% Virgin powder
  • Impact resistant and flexibility
  • Good chemical resistance
  • Durable enough for under hood applications and heat resistant up to 250 degrees F

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

More info...


8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags


Color: Off White
Gloss Level: Gloss 90+/-5
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.


Eastwood 100% satisfaction guarantee


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Customer Reviews

Questions & Answers

Customers also viewed: