• Home
  • Hotcoat Powder Coat Olive Drab Green

Hotcoat Powder Coat Olive Drab Green

Item #10248 Hotcoat Powder Olive Drab Green

Extremely durable, chip-resistant finish; coat and cure in under an hour
  1. Powder Olive Drab 8 Oz
    Item #10248
    Only $9.99

    In stock

  2. Powder Olive Drab 1 Lb
    Item #10248LB
    Only $13.99

    In stock

  3. Powder Olive Drab 25 Lb
    Item #1024825LBS
    Only $199.99

    Out of stock

  4. Powder Olive Drab 50 Lb
    Item #1024850LBS
    Only $369.99

    Out of stock



Do The Job Right with Eastwood Powders!

  • Provides extremely durable finish
  • Contains no environmentally harmful solvents
  • 100% Virgin powder
  • Impact resistant and flexibility
  • Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

More info...


8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags


Color: Olive Drab
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.


Eastwood 100% satisfaction guarantee


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Customer Reviews

Questions & Answers

Customers also viewed: