Add a mirror-like finish to any metal part of your car by coating it with our single-stage reflective chrome powder coat. Of all Eastwood’s powder coating colors, chrome may be the most versatile. It has a deep 95% gloss that resembles polished aluminum for a factory-like topcoat. You can also cover it with any translucent powder coat to create a candy finish for hot rods, Kustoms, hi-risers and other project cars. The technique isn’t just for cars, either — you can give your quad a fresh new look by powder coating ATV parts with bright chrome.
Eastwood HotCoat powders are far superior to liquid coatings for parts and body panels. They provide an extremely durable finish that is chip-, chemical- and fuel-resistant. All powders are formulated from the highest quality materials and are durable enough for under-hood applications with heat resistance up to 250 degrees Fahrenheit. They are suitable for any metal surface, and in most cases, they cure at a temperature of 400 degrees Fahrenheit for 20 minutes after flow-out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
There are many options for how to powder coat chrome so you can create one-of-a-kind accents and primary finishes. You can leave the single-stage chrome as-is or add clear coats, metallic and sparkles for extra effect. Use it on steel or stainless as well as aluminum to get the same shiny look at a lower price. Do The Job Right with Eastwood powders and the HotCoat Powder Coating System. Visit our large selection of powder coat videos and articles for expert advice.Features:
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
Finished gloss is between traditional Reflective Chrome Powder and Reflective Chrome with clear coat. For best results with translucent's, we recommend using our traditional Reflective Chrome Powder.
8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags
Gloss Level: High Gloss
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyurethane
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Eastwood 100% satisfaction guarantee
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
You may also be interested in the following product(s)
Starting at: $14.99