Induction Innovations Mini-Ductor Venom and Standard Coil Kit MDV-790

Mini-Ductor Venom Induction Heater Kit (MDV-790)

With the Induction Innovations Mini-Ductor® Venom®, you can heat up metal parts in seconds with no mess or fuss. This is one of our most popular portable induction heater series for loosening seized hardware, removing plastic body moldings, curing paint, taking off vinyl graphics and many other automotive tasks. The Mini-Ductor Venom packs 1,000 watts of power and doesn’t mar the surface like an oxyacetylene torch. Just plug it into a 110-volt outlet and you’re ready to operate.

The Mini-Ductor MDV-790 flameless heating tool includes a Standard Coil Kit with eight pre-formed coils for quickly releasing seized bolts, nuts and screws up to 1.5 inches in diameter. You will also receive a heavy-duty power cord and water-resistant hard carrying case. DIYers get the control and safety they need for a variety of projects at a great price when they shop at Eastwood. This induction heater is backed by a two-year manufacturer’s warranty and our 100% customer satisfaction guarantee.

• Includes MD99-601, MD99-602, MD99-603
• The MDV-790 includes a Standard Coil Kit (MD99-650)
• 1,000 watts of power
• 70" power cord
• Carry Case
• Operators Manual
• 2-year warranty against manufacturing defects

Standard Coil Kit:

The Standard Coil Kit is an accessory for the Mini-Ductor®. The kit enables you to heat and release seized nuts and bolts up to 1.5″ in diameter and other metallic hardware from corrosion and thread lock compounds.

It comes with the following coils:

• One 1 3/4″ pre-formed coil (MD99-607: 8.75″L x 2.25″W)
• One 1 1/2″ pre-formed coil (MD99-608: 8.5″L x 2″W)
• One 1 1/4″ pre-formed coil (MD99-609: 8.25″L x 2″W)
• One 1″ pre-formed coil (MD99-610: 8.25″L x 1.75″W)
• One 3/4″ pre-formed coil (MD99-611: 4.5″L x 1.25″W)
• Two 7/8″ pre-formed coils (MD99-601: 5″L x 1.25″W)

What Is Induction Heating and how does it work?

Induction heating offers a combination of speed, consistency and control by using invisible, flameless heat that is transferred to the product via electromagnetic waves in which the part never comes into direct contact with any flame, and the coil itself does not get hot. The coil serves as the transformer primary and the part to be heated becomes a short circuit secondary. When a metal part is placed within the induction coil and enters the magnetic field, circulating eddy currents are induced within the part. These eddy currents flow against the electrical resistivity of the metal, generating precise and localized heat without any direct contact between the part and the coil.