The IR325B Heavy Duty Air Nibbler from Ingersoll Rand is one of the best quality air nibblers on the market today. Get a bigger bite and better angle cuts with IR's Heavy Duty Air Nibbler. Instead of shearing or sawing, the tool "nibbles" cold rolled steel, plastic, tin, aluminum, and other metals, up to 18 gauge thicknesses at a rate of more than 6 feet per minute. It's ideal for DIY fabricators and sheet metal shops.
- Cuts out quarter panels without distorting the edges of the material
- Start cuts in the center of a panel
- Holds a tight 1/4" radius with great accuracy
- Easy to operate and control
- Balanced, lightweight tool
- Requires 1/2" pilot/starter hole
About Ingersoll Rand IR325B Heavy Duty Air Nibbler
Cuts out quarter panels without distorting the edges of the material. Holds a tight ¼” radius with great accuracy. Easy to operate and control.
Always wear appropriate eye protection. Do not exceed 90 psi. Hold tool securely (2-handed operation is recommended). Keep loose clothing, jewelry and long hair away from rotating components. Use only with specific "impact-rated" sockets, adapters and accessories. Always make sure the work piece is securely clamped or anchored. Always disconnect tool from air supply of unplug when changing sockets or accessories.
1 Year Limited Manufactures Warranty
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov