Find Anything, Fast!

Need Support or Have a Question?

Click Here
  • Home
  • Eastwood Jaded Green Metallic 4:1 Basecoat Gallon
Eastwood Jaded Green Metallic 4:1 Basecoat Gallon is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Fantastic color Just finished spraying this color plus the 2 to 1 clear coat on my 73 olds Omega. Added side striping and man did this color pop. Exactly the results I anticipated. Paint & clear went on smooth w/ great results. Extremely satisfied with the results since this was only my 2nd paint job. Thanks Eastwood great product. PS paint should be packaged in a can similar to the gallon clear can. That large mouth gallon can quite messy when pouring.Thanks we are HAPPY!!!!
Date published: 2018-02-21
Rated 5 out of 5 by from 1967 firebird It is an outstanding color with awesome glitter in the sun. Just won the Elma wa. Heat on the street show sporting this color!
Date published: 2017-08-06
  • y_2018, m_6, d_23, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_13726ZPA, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Black primer or Grey?

Asked by: Durdeedann
Gray or Black would be perfectly fine. Gray is generally a great all around color.
Answered by: Scott C
Date published: 2018-05-31

How close of a match is Eastwood Jade Green Metallic to DuPont 4534-L Jade Mist or Bahama Green Ditzler PPG 43263 R.M. A-1614

Asked by: Jstarone
Unfortunately we have no way of matching our colors to other brands or specific color codes.
Answered by: Scott C
Date published: 2018-03-19

Can this be used on a engine block?

Asked by: Doityourselfer
This paint is not temp rated for an engine block. We would recommend one of our engine paints for this application:
Answered by: Kelly H
Date published: 2017-12-26
  • y_2018, m_6, d_23, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_13726ZPA, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Jaded Green Metallic 4:1 Basecoat Gallon

Eastwood Jaded Green Metallic 4:1 Basecoat Gallon

Item #13726ZPA

Urethane basecoat works with our Low-VOC Primers, Clears; w/ activator
Quantity: close

In stock


Price as configured: $149.99

Price as configured: $149.99

Add to Wishlist


< Back


Eastwood Jaded Green Metallic Paint adds the superior durability of urethane to the ease of conventional basecoats.

  • Apply a durable urethane finish wherever you live in the continental US, even CA
  • Choose a fast, medium or slow Low-VOC Activator
  • Makes 5 sprayable quarts
  • Clearcoat is required on basecoat paints
  • Mixes 4:1 with your activator choice
  • Approximate coverage: 160 SQ FT
  • Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting

Basecoat Paint Kit is a low-VOC system, so it meets regulatory limits in highly-regulated areas, eliminating the need to switch to a waterborne system.

More info...
< Back

About Eastwood Jaded Green Metallic 4:1 Basecoat Gallon

Thoroughly mix four parts Low-VOC Urethane Basecoat with one part Low-VOC Urethane Activator. Use Fast (50308ZP) for small jobs, or temps below 75°F; Medium (50309ZP) for small jobs, or temps between 70-85°F; or Slow (50310ZP) for large jobs, or temps above 80°F. Keep in mind, other factors, such as humidity, air flow and total film thickness should also be considered. In many situations, it will be useful to add 10%-20% 50104ZP Zero-VOC Reducer to aid sprayabliity, flow and leveling. Remember, this is an activated basecoat system; only mix as much as is needed. Pot life is about 2 hours at 70°F.

HVLP Gun: Fluid Tip 1.2-1.4 mm Inlet Spray Pressure 8-10 psi
Conventional Gravity: Fluid Tip 1.2-1.5 mm Inlet Spray Pressure 40-50 psi
Conventional Siphon: Fluid Tip: 1.3-1.6 mm Inlet Spray Pressure 40-50 psi

Apply Low-VOC Urethane Basecoat color in two full medium wet coats with a consistent 50% overlap pattern. Allow five to ten minutes flash time between coats. Flash time should increase if additional coats are applied. Most colors will cover in two coats. A third and final coat may be applied to set even metallic pattern. If required, apply this light coat immediately after the previous full wet coat, moving the gun with faster passes, from further away. Mist basecoat onto the wet film until the metallic pattern is uniform.

Basecoat should dry dust-free within 10-20 minutes. May be lightly sanded in as few as 20 minutes. Wait at least 30 minutes before wet sanding. Wait 45-90 minutes before taping on the fresh film. All dry times are approximate, at 70°. Temperature, air flow, total film thickness and other variable may extend these times.


Urethane Basecoat, 1 gallon
Low-VOC Urethane Activator, 1 qt. (your choice of Fast, Medium or Slow)


50104ZP Zero-VOC Urethane Paint Reducer
PRE Painting Surface Prep
Low-VOC Gray Urethane Primer
12569 Concours Master Gun Cleaning Kit
12846Z Aerosol-Injected Cleaner
SAS Bandit Respirator
Gen-Nex Painters Coveralls
15639 Concours LT HVLP Paint Gun 1.3mm


Click here for product instructions


Always wear appropriate eye, skin and respiratory protection. Consult MSDS for specific precautions and warnings.

Product Video

< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: