Browse Subcategories:

Powder Coating

Eastwood Powder Coat Supplies

Powder coating gives you one of the most economical, color-durable, and longest-lasting finishes available... and the Eastwood HotCoat powder coating system makes it about as easy as it can get! DIY powder coating produces surfaces that are far more resistant to chipping, scratches and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available.
For the best combination of color, safety and affordability, use the Eastwood HotCoat powder coating system for your next DIY powder job. Powder coating allows you to apply thicker, more uniform finishes with less hazardous waste than liquid paints. It also produces more dynamic effects and takes less time to dry. Our selection of powder coat equipment has everything you need for a stunning outcome at a low price.

How to Powder Coat

Step One - Dirty Oily Valve Cover


• Degrease the cover with Simple Green® and an Eastwood Contour Gray Non-Woven Hand Pad (15178).


• Use a mini stainless steel brush to clean the inside corners and tight spots.


• Smooth pitted areas with Eastwood Contour 400 Grit Abrasive Paper (15169).


• Follow up with another Simple Green® and an Eastwood Contour Gray Non-Woven Hand Pad cleaning.


Clean Dirty Valve Cover

Step Two - Bake, Degrease and Clean


• Pre-bake the valve cover for 2 hours at 400ºF to burn off and outgas embedded contaminates in the cast aluminum surface. Our valve cover had years of use, which is why the 2-hour pre-bake was required.


• Cool the cover, and spray completely with Eastwood PRE Painting Prep (10041Z) to dissolve and wash away surface contaminates.


Clean with Eastwood Pre

Step Three - Beautiful Near-Chrome Finish


• Pre-heat the oven to 400ºF.


• Hang the cover and apply Eastwood Extreme Chrome Bonded Powder (15999). We used large paper clips to create hooks to hang the valve cover.


• Allow part to reach full temperature and bake 20 minutes (we baked ours for 45 minutes to ensure a full cure).


• Remove the cover and immediately hot-flock with Eastwood Rally Blue Translucent Powder (16051). Read more about hot-flocking here: garage.eastwood.com.


• Place the cover back in the heated oven and bake for 20 minutes or longer.


• Remove the part and cool.


Eastwood Extreme Chrome Powder

Step Four - Final Product After Coating With Rally Blue


• Use a fine, long file to remove the powder from the raised letters and rib details.


• Block sand raised surfaces with 320, then 800, grit abrasive paper.


• Clean off the dust and you’re done!


Eastwood Rally Blue Powder

Powder Coating Guns

Choosing the right powder coat gun is the first step to success. The Original DIY Powder Coat Gun System is an excellent all-around solution, and  the Dual-Voltage Powder Coat Gun has two different settings for more precise use. Powder coating starter kits include a gun and various accessories for those new to the technique. You can save by ordering a powder gun with a curing oven or compressor.


Vibrant Powder Colors

How do you want your vehicle to look? Whether you have spent hours upon hours dreaming about a color,  or if you are  open for ideas, Eastwood has nearly 100 different HotCoat powder colors to help bring your vision to life. These finishes can be applied within an hour and won't chip or fade over time. In addition to a variety of lights and darks, we make powders with flat, gloss, metallic, and textured effects.


Prep & Accessories

Make sure you have everything you need to get your surface ready and apply a dazzling finish. Use Eastwood powder coating strippers and cleaners to remove old paint, powder, wax and grease that can hinder your work. If there are blemishes or irregularities, high-temperature lab metal is the perfect solution for permanent repairs. Accessories such as masking tapes, storage bottles, powder coating polish and beginner's handbooks will get you up to speed.


Curing Equipment

A key part of doing the job right with powder coating: High heat is needed to properly cure your work. Use a powder coating curing oven for small projects or aim an infrared curing lamp at larger parts and housings. We carry light stands for holding and directing your lamps and non-contact thermometers to know when items are safe to handle.


The Eastwood Guarantee

All Eastwood HotCoat powder coating equipment has a 100 percent customer satisfaction guarantee. We also have some of the longest warranties in the business on our award-winning parts and accessories.


For decades, we've helped do-it-yourselfers improve their restoration projects with more than 4,000 unique products. Let us help you do the job right.


Set Descending Direction

1-40 of 158

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • HotCoat Powdercoating DIY System

    Eastwood Original DIY Powder Coat Gun System

    11,000-volt gun brings benefits of powder-coating to your home shop
    $85.99
    11,000-volt gun brings benefits of powder-coating to your home shop
    $85.99
  • Powder Standard Color Sample Kit

    Powder Standard Color Sample Kit

    Try it! 6-Pc. Sampler Set of our standard HotCoat™ Specialty Colors
    $53.99
    Try it! 6-Pc. Sampler Set of our standard HotCoat™ Specialty Colors
    $53.99
  • Eastwood Elite HotCoat PCS-1000 Powder Coating System

    Eastwood Elite HotCoat PCS-1000 Powder Coating System

    The Eastwood Elite Hotcoat PCS-1000 will give you the power to perform any powder coating job with professional results.
    $899.99
    The Eastwood Elite Hotcoat PCS-1000 will give you the power to perform any powder coating job with professional results.
    $899.99
  • Hotcoat Powder Semi-Gloss Black

    Hotcoat Powder Coat Semi-Gloss Black

    A deep semi-gloss black finish for when satin and gloss will not do.

    Starting at: $8.99

    A deep semi-gloss black finish for when satin and gloss will not do.

    Starting at: $8.99

  • Hotcoat Powder Mirror Black

    Hotcoat Powder Coat Mirror Black

    Mirror Black gives a super deep, wet, glossy finish.

    Starting at: $8.99

    Mirror Black gives a super deep, wet, glossy finish.

    Starting at: $8.99

  • Dual Voltage HotCoat Powder Gun

    Eastwood Dual Voltage Powder Gun

    2 voltage settings allow complete coverage--tight spots to large areas
    $129.99
    2 voltage settings allow complete coverage--tight spots to large areas
    $129.99
  • Hotcoat Powder Satin Black

    Hotcoat Powder Coat Satin Black

    Provides a smooth custom matte black satin finish.

    Starting at: $10.99

    Provides a smooth custom matte black satin finish.

    Starting at: $10.99

  • Eastwood Original DIY Powder Coating Gun Starter Kit

    Eastwood Original DIY Powder Coating Gun Starter Kit

    11,000-volt gun brings benefits of powder-coating to your home shop

    Starting at: $147.98

    11,000-volt gun brings benefits of powder-coating to your home shop

    Starting at: $147.98

  • Hotcoat Powder Flat Black

    Hotcoat Powder Coat Flat Black

    This smooth, custom flat black finish provides a durable, great looking finish.

    Starting at: $8.99

    This smooth, custom flat black finish provides a durable, great looking finish.

    Starting at: $8.99

  • Eastwood Dual Voltage Powder Gun Starter Kit

    Eastwood Dual Voltage Powder Coating Gun Starter Kit

    Comes with the items you need to start powder coating

    Starting at: $191.98

    Comes with the items you need to start powder coating

    Starting at: $191.98

  • Hotcoat Powder Coat Jet Black

    Hotcoat Powder Coat High Gloss Jet Black

    High Gloss Jet Black powder provides a smooth, glossy finish.

    Starting at: $8.99

    High Gloss Jet Black powder provides a smooth, glossy finish.

    Starting at: $8.99

  • HotCoat Powder Black Diamond Metallic

    HotCoat Powder Coat Black Diamond Metallic

    Black Diamond Metallic powder provides a glossy finish with fine metallic particles.

    Starting at: $16.99

    Black Diamond Metallic powder provides a glossy finish with fine metallic particles.

    Starting at: $16.99

  • Hotcoat Powder Black Wrinkle

    Hotcoat Powder Coat Black Wrinkle

    Low gloss black wrinkle finish perfect for custom parts or hiding minor surface defects.

    Starting at: $9.99

    Low gloss black wrinkle finish perfect for custom parts or hiding minor surface defects.

    Starting at: $9.99

  • Dual Voltage Powder Coating Gun and Pancake Compressor

    Eastwood Dual Voltage Powder Coating Gun and Pancake Compressor

    Purchase both a powder coating sytem and compressor and SAVE!

    Starting at: $202.96

    Purchase both a powder coating sytem and compressor and SAVE!

    Starting at: $202.96

  • Hotcoat Powder Black Stardust

    Hotcoat Powder Coat Black Stardust

    Black isn't black with this custom powder featuring sparkling flakes.

    Starting at: $27.99

    Black isn't black with this custom powder featuring sparkling flakes.

    Starting at: $27.99

  • DIY Powder Coating Gun and Pancake Compressor

    Eastwood DIY Powder Coating Gun and Pancake Compressor

    Purchase both a powder coating sytem and compressor and SAVE!

    Starting at: $158.96

    Purchase both a powder coating sytem and compressor and SAVE!

    Starting at: $158.96

  • Hotcoat Powder Black Chrome

    Hotcoat Powder Coat Black Chrome

    Create a custom black-chrome look over chromed and polished finishes.

    Starting at: $13.99

    Create a custom black-chrome look over chromed and polished finishes.

    Starting at: $13.99

  • Hotcoat Powder Black Texture

    Hotcoat Powder Coat Black Texture

    Provides a custom matte black light textured finish

    Starting at: $10.99

    Provides a custom matte black light textured finish

    Starting at: $10.99

  • Hotcoat Powder Black Primer

    Hotcoat Powder Coat Black Primer

    Enhance the durability of powder-coated finishes with this epoxy-based powder.

    Starting at: $12.99

    Enhance the durability of powder-coated finishes with this epoxy-based powder.

    Starting at: $12.99

  • Hotcoat Powder 3D Shimmering Metallic Battleship Burst

    Hotcoat Powder 3D Shimmering Metallic Battleship Burst

    3D Shimmering Metallic Flake Battleship Burst gives a smooth semi-gloss finish.

    Starting at: $16.99

    3D Shimmering Metallic Flake Battleship Burst gives a smooth semi-gloss finish.

    Starting at: $16.99

  • Hotcoat Powder Ford LIght Blue

    Hotcoat Powder Coat Ford Light Blue

    This glossy light blue looks just right on many Fords.

    Starting at: $9.99

    This glossy light blue looks just right on many Fords.

    Starting at: $9.99

  • Hotcoat Powder 3D Shimmering Metallic Storm Silver

    Hotcoat Powder 3D Shimmering Metallic Storm Silver

    3D Shimmering Metallic Flake Storm Silver provides a semi-gloss finish that looks great on wheels & custom parts!

    Starting at: $16.99

    3D Shimmering Metallic Flake Storm Silver provides a semi-gloss finish that looks great on wheels & custom parts!

    Starting at: $16.99

  • Hotcoat Powder Metallic Blue

    Hotcoat Powder Coat Metallic Blue

    Medium Blue high gloss finish with fine metallic sparkle flakes

    Starting at: $19.99

    Medium Blue high gloss finish with fine metallic sparkle flakes

    Starting at: $19.99

  • Hotcoat Powder 3D Shimmering Metallic Cataclysmic Black

    Hotcoat Powder 3D Shimmering Metallic Cataclysmic Black

    3D Shimmering Metallic Flake Cataclysmic Black looks great on wheels, custom parts and more!

    Starting at: $16.99

    3D Shimmering Metallic Flake Cataclysmic Black looks great on wheels, custom parts and more!

    Starting at: $16.99

  • Hotcoat Powder Coat Translucent Blue

    Hotcoat Powder Coat Translucent Blue

    Gives a glossy candy blue finish best applied over chromed, polished or chrome powdered parts.

    Starting at: $12.99

    Gives a glossy candy blue finish best applied over chromed, polished or chrome powdered parts.

    Starting at: $12.99

  • Hotcoat Powder 3D Shimmering Metallic Halcyon Gold

    Hotcoat Powder 3D Shimmering Metallic Halcyon Gold

    3D Shimmering Metallic Flake Halcyon Gold looks great on wheels, under the hood and more!

    Starting at: $16.99

    3D Shimmering Metallic Flake Halcyon Gold looks great on wheels, under the hood and more!

    Starting at: $16.99

  • Hotcoat Powder Mirror Blue

    Hotcoat Powder Coat Mirror Blue

    Mirror Blue provides a deep 95% gloss finish.

    Starting at: $10.99

    Mirror Blue provides a deep 95% gloss finish.

    Starting at: $10.99

  • Hotcoat Powder Architectural Bronze

    Hotcoat Powder Coat Architectural Bronze

    A beautiful bronze finish great for lawn furniture, architectural projects and custom applications.

    Starting at: $5.68

    A beautiful bronze finish great for lawn furniture, architectural projects and custom applications.

    Starting at: $5.68

  • Hotcoat Powder Ford Dark Blue

    Hotcoat Powder Coat Ford Dark Blue

    Replicate that Dark Blue found on many Ford vehicles.

    Starting at: $9.99

    Replicate that Dark Blue found on many Ford vehicles.

    Starting at: $9.99

  • Powder Specialty Color Sample Kit

    Powder Specialty Color Sample Kit

    Try it! 6-Pc. Sampler Set of our high-tech HotCoat™ Specialty Colors
    $69.99
    Try it! 6-Pc. Sampler Set of our high-tech HotCoat™ Specialty Colors
    $69.99
  • Eastwood Rally Blue Powder

    Eastwood Rally Blue Powder

    Rally Blue provides a deep glossy translucent blue finish

    Starting at: $12.99

    Rally Blue provides a deep glossy translucent blue finish

    Starting at: $12.99

  • Hotcoat Powder Cadillac Blue

    Hotcoat Powder Coat Cadillac Blue

    This glossy blue looks great on parts found on Cadillacs or if you're just looking for a cool color.

    Starting at: $9.99

    This glossy blue looks great on parts found on Cadillacs or if you're just looking for a cool color.

    Starting at: $9.99

  • Powder Metallic 6 Color Sample Kit

    Powder Metallic 6 Color Sample Kit

    Try it! 6-Pc. Sampler Set of our Metallic HotCoat™ Specialty Colors
    $85.99
    Try it! 6-Pc. Sampler Set of our Metallic HotCoat™ Specialty Colors
    $85.99
  • Hotcoat Powder Navy Blue

    Hotcoat Powder Coat Navy

    Navy Blue provides a deep glossy finish.

    Starting at: $10.99

    Navy Blue provides a deep glossy finish.

    Starting at: $10.99

  • Extreme Chrome Bonded Powder Coating Eastwood

    Extreme Chrome Bonded Powder Coating Eastwood

    Eastwood Extreme Chrome Bonded Powder is the most reflective powder we offer!

    Starting at: $19.99

    Eastwood Extreme Chrome Bonded Powder is the most reflective powder we offer!

    Starting at: $19.99

  • Hotcoat Powder Turquoise Blue

    Hotcoat Powder Coat Turquoise Blue

    Provides a high gloss custom turquoise blue finish.

    Starting at: $8.99

    Provides a high gloss custom turquoise blue finish.

    Starting at: $8.99

  • Hotcoat Powder Pastel Blue

    Hotcoat Powder Coat Pastel Blue

    This powder provides a high gloss cool pastel blue finish.

    Starting at: $8.99

    This powder provides a high gloss cool pastel blue finish.

    Starting at: $8.99

  • Hotcoat Powder Coat Signal White

    Hotcoat Powder Coat Bright Signal White

    Signal White provides a high gloss ultra white finish.

    Starting at: $8.99

    Signal White provides a high gloss ultra white finish.

    Starting at: $8.99

  • Hotcoat Powder Aqua Blue

    Hotcoat Powder Coat Aqua Blue

    Aqua Blue provides a smooth high gloss finish.

    Starting at: $8.99

    Aqua Blue provides a smooth high gloss finish.

    Starting at: $8.99

  • Hotcoat Powder Blue Gray

    Hotcoat Powder Coat Blue Gray

    Blue Gray provides a high gloss dark gray/blue finish.

    Starting at: $8.99

    Blue Gray provides a high gloss dark gray/blue finish.

    Starting at: $8.99

Set Descending Direction

1-40 of 158

Page:
  1. 1
  2. 2
  3. 3
  4. 4




 

Sponsored Links: